Used Zippo 1250 for sale (1,675)

Condition: used, operating hours: 130 h, functionality: fully functional, power: 8.09 kW (11.00 HP), first registration: 12/2011, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2150 Nilfisk Egholm Park Ranger 2150 - Used Unit Year of Manufacture Base Unit: 2011 Cab: 2015 Operating Hours: 129 Technical Data - Base Unit Length mm 2225 Width mm 1015 Fpjdpjzf Ezbsfx Akyon Height with / without cab mm 1935 / 1210 Weight with / without cab 1) kg 670 / 560 Payload kg 630 / 740 Permissible Total Weight kg 1300 Engine: Perkins Diesel 403J-11 HP / kW 26 / 19 Four-wheel drive: Standard Drive System: Hydrostatic drive. Completely hydraulic operated machine carrier: requires minimal maintenance. Performance: Turning radius - curb to curb mm 3000 Turning radius - inside mm 1100 Working speed, max. km/h 16 Articulated Steering Quick-change system for all attachments Trailer hitch Liquid wax coating 12-Volt socket: For mobile phone charger Attachments Front sweeper (summer) with 3 side brushes from 2015 Height adjustment: The front wheel on the brush unit adjusts the optimum sweeping height while minimizing brush wear. Weight: 91 Kg Brush rotation speed: Infinitely adjustable. Dimensions Length mm 2900 Width mm 1200 Height with mounted hand suction hose mm 2200 Dimensions when parked Length mm 1350 Width mm 1010 Height mm 1920 Working width - 2 brushes: 1220 mm Working width to the 3rd brush: 1660 mm Hand suction hose: 6 meters Sweeper hopper from 2015 Net capacity: 438 liters Gross capacity of the sweeper hopper: 458 liters Sweeper hopper payload, max: 300 Kg Tipping height: 1300 mm Weight: 131 Kg Capacity of the fresh water tank: 100 liters Front sweeper (winter) from 2011 Dimensions Length: 3020 mm Width: 1220 mm Height with cab: 1935 mm Dimensions when parked Length: 900 mm Width: 1220 mm Height: 650 mm Weight: 101 Kg Performance Clearing width, straight position: 1220 mm Clearing width - 25°: 1140 mm Ground clearance under the brush: 420 mm Brush diameter: 550 mm Working speed: 1-10 km/h Theoretical sweeping performance: 12200 m2/h Clears snow depths of up to: 150 mm Brush rotation speed rpm 255 Swivel angle 25° Salt and grit spreader from 2011 Durable material: All parts in contact with salt and grit are made of corrosion-resistant plastic or stainless steel. Extra spreading material: Additional bags of salt and grit can be stored on the grid of the spreader hopper until the total weight is reached. This allows you to refill on the go. Support: This is used for quick and tool-free installation and removal, as well as for storage when not in use. Installation and removal are tool-free and easy on the back. Cover: Protects the spreading material from moisture. Dimensions Length: 2510 mm Width: 1015 mm Dimensions when parked Length with support: 1175 mm Width: 800 mm Height with support: 1350 mm Weights Weight with cab: 860 Kg Payload with cab: 440 Kg Weight (salt and grit spreader): 97 Kg Spreader Volume: 210 liters Spreader payload, max: 350 Kg Loading height: 1250 mm Performance Spreading width: 1000-5000 mm Operating speed: 1-16 km/h Subject to changes, printing errors, and prior sale. All information is provided without warranty. Sale is made excluding any guarantee or warranty.

Condition: excellent (used), robust transport trolley Width: 895 mm Length: 1340 mm Height: 1040 mm 3 tiers: 815 x 1250 mm Fpedoy I T U Ropfx Akyen Multiplex board, 20 mm thick Aluminium profiles, 40 mm diameter

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers Fpsdpfxsxfwdo Akysn + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, machine/vehicle number: 26737, Year of construction: 2010, operating hours: 8,321 h, load capacity: 3,000 kg, lifting height: 3,200 mm, free lift: 1,420 mm, fuel type: gas, mast type: duplex, construction height: 2,220 mm, Equipment: sideshift, .: 26737 Device details: Year of manufacture: 2010 Load capacity: 3000 kg Lifting height: 3200 mm Recorded operating hours: 8321 h Free lift: 1420 mm Mast type: Duplex Mast height: 2220 mm Length/Width/Height: 2700 / 1250 / 2180 mm Operating weight: 4480 kg ---- Equipment: * Overhead guard * 3rd valve * Half cabin * Full free lift * Heater * Front work light * Rear work light * Right-hand door ----- Attachments: * Side shifter ---- Additional device information: Flashing beacon ---- The operating hours are generally the recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, we also offer rental options! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Fpodjz Hadwspfx Akyjn Subject to prior sale and errors in this offer. In the dealer business, the device is sold in its current condition, without refurbishment. All information without guarantee, errors and changes excepted.

Condition: used, functionality: fully functional, machine/vehicle number: 33530, mileage: 239,900 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 15.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Chassis designed for a 28-ton weight variant, OM471 engine, transmission oil cooler, disc brakes, Active Brake Assist, High Performance Engine Brake, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 tons, 3-leaf springs, air-suspended rear axle, rear axle 13 tons with differential lock, steerable and liftable 9-ton trailing axle, regulated water pump, transmission lock for auxiliary drive, daytime running lights, light sensor, trailer coupling Ringfeder (D40), tires: front and rear axles 385/65R22.5, middle axle 315/80R22.5, fuel tank 290 liters + 60 liters AdBlue, length/width/height/mm: 9,200/2,550/3,650; M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, navigation system, tinted windshield, sunroof, heated and electrically adjustable mirrors, electric windows, comfort central locking system, driver's comfort suspension seat, passenger's comfort suspension seat, multifunction steering wheel, reversing warning system combined with hazard lights, digital tachograph VDO, trip computer, 12/24 V sockets in the passenger footwell, circuit breakers, pre-equipment for toll collection, air conditioning, refrigerator, cruise control, attention assist, traffic sign assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof-mounted rotating beacons, sun visor. Fpedpfxjz Hbr No Akyon Total volume 15.5 m³, usable volume consisting of an 800-liter fresh water tank and a 13 m³ sludge tank, tank wall thickness 6 mm, tank emptying via free discharge or by pressing with the vacuum pump, floor flap over the entire cross-section to be opened upwards hydraulically, mechanical swivel locks, sealing of the closure base in NBR, one baffle in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide valve, sludge tank level indicator with float and external scale (division of 500 L), sight glass for water tank, discharge skirt made of stainless steel, vacuum pump GardnerDenver RFW 200 DVL (1250 m³/h) with 685 operating hours, hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (80 l/min at max 175 bar) with 681 operating hours, hydraulically driven, stepless pressure regulation, small manual HD hose reel with approx. 40 m HD hose DN13 and spray gun (with swivel joint), 5x LED work lights (one at the rear and two on the right and left), LED rotating beacon at the rear of the superstructure, suction hose boxes on the right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/balancing/discharge, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, trailer suction line, trailer hydraulics.

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing Fpjdpfxevb Dcms Akysn - coolant device, chip conveyor - diverse accessories *

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with powered tools, chip conveyor, automatic tool measuring system, chip evacuation conveyor, and bar feeder. Put into operation 11/2014 Control system OSP-P300L CNC with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of 03/18/2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours And increasing. Power consumption 33.1 kVA Technical data Max. swing diameter 480 mm (approx. based on the current chip conveyor design) Max. machining diameter 340 mm Max. turning length 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 interface, 80 mm bore, integrated motor Speed range 45 - 5,000 rpm Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001° increment Sub-spindle Speed range 50 – 6,000 rpm Power/continuous operation 11 kW/7.5 kW Spindle with 140 mm interface, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub-spindle travel - NC axis W travel for W450: 595 mm Spring-loaded part ejector from the sub-spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub-spindle Turret Number of tool positions 12, both fixed and powered BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Powered tools Drive power 7.1/4.1 kW Speed range 45 – 6,000 rpm Feed speeds Rapid traverse in X and Z axes 25/30 m/min Rapid traverse in C axis 200 rpm Travels X-axis 260 mm Z-axis 510 mm Y-axis 115 mm (+70 mm / -45 mm) Machine data Width 3330 mm – without bar feeder and chip conveyor Depth 1800 mm Height 2250 mm Machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Cutting time overrun check Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Function for reducing cycle time Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Bar feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction unit Equipment for the machine: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 Fpsdpfez Hk R Uex Akysn 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm) 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub-spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial holder - 5X Tool holder, turning - 5x Tool holder, boring bar - 2x Front-end drive, double-sided - 3x Front-end drive, side - 3x Reduction sleeve (manufactured from stock material) Reduction - nylon diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Year of construction: 2004, condition: good (used), Manufacturer: Urschel Model: L-A Fpedpoz Hu Rxefx Akyon Year: 2004 Condition: Used Serial number: 900.048 Stock number: 3441J Product diameter, max: 12.7 mm Knife set: 6.4 mm Infeed hopper: 130 x 100 mm Infeed height: 1200 mm Power: 3 x 380V, 50Hz, 1.5kW Dimensions: 1500 x 950 x 1250 mm Weight: 430 kg

Condition: used, Mit der BAHMÜLLER ZH 29 Drahtheftmaschine werden Wellpappe und Vollpappe mithilfe von Heftklammern aus Flachdraht formschlüssig miteinander verbunden. Die BAHMÜLLER Heftmaschine ZH 29 wird mit einem Heftschuh und einem Auflagetisch ausgerüstet, um größere Zuschnitte leichter handhaben zu können. The BAHMÜLLER ZH 29 Wire Stitcher uses flat-wire staples to join corrugated and solid board together in a form-fit manner. The BAHMÜLLER ZH 29 stitcher is equipped with a stitching shoe and a support table to handle large size blanks. Drahtheftmaschine / Wire Stitcher BAHMÜLLER ZH 29 Baujahr / Year 1999 - Serial-No. WH-03562 Fpsdpfx Ajz Hw Igjkysn Ausladung / Projection 1250 mm Standardheftleistung / Stitch Capacity 300 Klammern/min. (staples/min) Heftgutstärke bis 25mm / Board Caliper Up to 25 mm (1”) Klammerbreite / Staple width 15mm oder (or) 18mm Technical Details: Stromaufnahme / power supply 0,25 KV/A Nettogewicht / Weight ca. 400kg Platzbedarf / Space requirement L 1660mm x B 430mm H 1580mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2003, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 20000 x 2500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 20000 mmY axis traverse: 3800 mmZ axis traverse: 1250 mmVertical capacity: 100 / 1350 mmDistance between columns: 3200 mm Milling head Head type: Auto-indexing BC universal UAD milling head (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 6000 rpmSpindle power: 27 kW Feedrates Rapid feedrates (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 150000 kgMachine dimensions approximate: 30190 x 8865 x 6200 mm Accessories Guarding: Door with platform access and new perimetral wire-mesh fenceAutomatic tool changer:ATC-120Chip conveyor:2 longitudinal hinge typeControl panel: 2 switched panels on each side of the tableElectronic handwheel: HR-510Coolant: External and internal high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Fpodjy Nfz Eopfx Akyjn

Condition: used, machine/vehicle number: 14062, Rotor diameter: 800 mm Rotor width: 1250 mm Number of rotor blades: 8 Fedpfjz H Dmvex Akyjpn Number of stator blades: 4/5 Inlet cross-section: approx. 800 x 1200 mm Drive motor: 110 kW

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: Fsdpoupiypjfx Akyepn X-axis: 400 mm Y-axis: 350 mm Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10800 € 207.36 € 35 mm Fodpfx Aoynnhkokyepn 137 mm 137 mm 3 1.1 kW 7 m/min 35x8 mm / 300 mm 50x12 mm / 400 mm 18x18 mm / 250 mm Ø 22 mm / 200 mm Ø 40x1,5 mm / 500 mm 30x15x2,5 mm / 500 mm 25x25x2 mm / 450 mm 35x35x5 mm / 400 mm 30x30x4 mm / 550 mm 1050 mm 500 mm 1250 mm 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 38000 € 725.8 € 100 to fix 1250 mm 500 mm 780 mm 1500 mm 25 mm/s 10 mm/s 4 mm/s 1300x600 mm 1250x400 mm 2400 mm 1200 mm 2450 mm 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Fpjdpfx Akjypbutoyon Heat exchanger Piece counter Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 30.000,00

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4533.22 € 300 x 40 x 51 mm 2,2 kW 1250 1/min 42 mm 540 mm 530 mm 1180 mm 800 x 600 x 1400 mm 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A Fedpfx Ajyrhpcjkyopn 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764)

Condition: new, Year of construction: 2026, neu 2026 080200 prompt, Zwischenverkauf v Türkei 6550 € 126.42 € 1 1250 mm 1.25 mm 0.8 mm 2 mm 150 ° 500 mm 200 mm 1500 mm 750 mm 1715 mm 315 kg geteilt, 45° Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Fpsdpfx Ajwirc Ajkyjn Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English

Condition: used, Year of construction: 2023, gebraucht 2023 8285 prompt, Zwischenverkauf v Türkei 33900 € 1 30600 € 30 to 1050 mm 3 (Y1, Y2, X) 160 mm 850 mm 250 mm 390 mm hydraulisch 10 mm/s 130 mm/s 495 mm 250 mm/s 835 mm 104 mm 75 l Fodpfxewirnfs Akyopn 7.5 kW 2470 mm 1250 mm 2245 mm 3250 kg demo machine / mint condition net price (price for new machine € 42.300,00) Y1, Y2, X - 3 Axis Control Unit - DT 10 Touch screen 2D graphic - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB Back gauge: motorized & linear guide & ballscrew Intermediate pieces for the upper tool clamping system Upper tool 1010/A/75°/0,8, sectioned Lower tool 2009/85° (V 16, 22, 35, 50 mm), sectioned Support arms with T-Slot Operating manual in German language with EC declaration of conformity OPTION: DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) € 2.110,- BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, neu Bulgarien 56920 € 1075.79 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 21 12,5 - 1250 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60 - 1/4 Gänge/" 240 - 1 315 mm 90 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 Fsdpswirv Aofx Akyspn turning length3.000 mm € 61360,00 turning length4.000 mm € 67270,00 turning length5.000 mm € 82750,00

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel Fsdpfx Akowirv Njyspn longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 48100 € 918.71 € 2550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4900 mm 1150 mm 1250 mm 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules Fpedpfjyb Sywsx Akysn OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 46300 € 884.33 € 2050 mm 11 mm 11 mm 9 mm 9 mm 7 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Fjdpfxjyb Szue Akyjpn Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 43550 € 831.81 € 1550 mm 12 mm 12 mm 10 mm 10 mm 8 mm 220 mm 200 mm 160 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Fpedpfeynmx Iox Akysn Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 72300 € 1366.47 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, Fedpfxeynm Aye Akyspn by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: used, Year of construction: 1980, 1250 mm tank diameter / tank height 1000 / 350 mm turning speed range 920 / 1415 U/min voltage 380 V power requirement 1,9 kW Fpsdpfx Aoxq Hgvjkyon volumn 125 Liter weight of the machine ca. 600 kg dimensions 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Fjdpfx Akjzzxb Hjyjpn Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg