Used Zinc Plant for sale (3,279)

Condition: used, Year of construction: 2019, Fruit reception: Water bath, fruit conveyor with water shower, chopper Packing press type H65: Capacity: 1,200 kg/h Yield up to 75% 24 press inserts (65 x 65 cm) 22 press cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Additional title: Fruit reception with water bath, fruit conveyor, chopper and packing press Iedpfjzty Ixjx Abnjtk Capacity: 1200 kg/h Features: Water bath, fruit conveyor with water shower, chopper, packing press with 24 press inserts and 22 press cloths

Condition: used, Year of construction: 1998, Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia Additional title: Refrigerant: Ammonia Cooling capacity: 70 kW Isdszty Ilopfx Abnotk Design to: -8 °C Design tc: 27 °C Power: 15 kW Operation / Control: Control cabinet with hardware control Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Condition: used, Cleaning-in-place system, completely mounted on a frame. The system consists of the following components: - 2 rectangular CIP tanks with hinged lids, each equipped with a heating coil. Gross capacity approx. 750 l and 500 l respectively. - Self-priming centrifugal pump (INOXPA, 2001, 3 kW, 15 m³/h) as CIP feed pump. - Control cabinet in housing with button panel - Various pipes, valves, actuators and sensors Additional title: Cleaning system with 2 containers Itsdpfxoztywmj Abnjk Volume container 1 appr.: 750 l Volume container 2 appr.: 500 l Length: 2,20 m Width: 1,60 m Height: 1,60 m Material: CIP containers from stainless steel Base construction: mounted on frame Features: 2 CIP containers, each with heating coil; CIP feed pump; various piping; actuators; sensors; control cabinet; frame

Condition: used, Year of construction: 1993, Additional title: Microfiltration Material: stainless steel Base construction: on stainless steel frame with feet Itsdpfx Asztwz Nsbnek Features: 32 filtration modules, pumps, pipes, valves, control cabinet

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Height: 2,9 m Isdpfx Aeztwu Aobnstk Operation / Control: Simatic S7 Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm Iedpfeffv Tpsx Abnetk 5. Dryer 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, warranty duration: 12 months, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Complete powder coating system (curing oven 3.2m + spray booth + Wagner/Gema application + conveying system) Like-new, complete powder coating system including a 3.2m electric/gas curing oven, mobile spray booth, Wagner or Gema application + hanging conveying system (200 kg). Ready for immediate use and flexibly expandable! Customer-specific adjustments possible upon request. Maximum flexibility and efficiency for your surface coating Are you looking for a reliable, high-performance, and immediately usable complete solution for powder coating? This complete powder coating system combines top-class industrial components into a perfectly coordinated overall system. Whether for single-part production, small series, or contract coating – the system offers you the ideal combination of high coating quality, low energy consumption, and well-thought-out material flow. The heart of the system is the generously sized electric or gas curing oven with a usable space of 3.20 x 1.40 x 2.00 [m]. The indirect heating via the integrated stainless steel thermal block and the powerful air circulation ensures excellent, homogeneous temperature distribution, which reliably prevents coating defects. The system is complemented by a mobile spray booth, which guarantees maximum flexibility in the hall area due to its design. Together with the proven Wagner/Gema handheld unit, you can apply a wide variety of powder coatings (from standard organic to metallic) precisely and economically. The included C-rail system, with its approximately 27 meters in length and a load capacity of 200 kg per carrier, ensures smooth, ergonomic transport of your workpieces between coating and curing. Important: Does the system not fit 1:1 into your hall? Individual adjustments are possible! Each production facility has its own requirements regarding space, component sizes, and processes. This system can be flexibly adapted to your specific conditions on site. - Tailored dimensions: Oven dimensions or booth sizes can be modified on request. - Expansion of the conveying system: Adjustment of the rail system (layout, switches, usable lengths) to your hall geometry. - Special equipment: Integration of additional components such as pre-treatment, extended control technology, alternative heating methods, or a higher degree of automation. Just contact us! We will examine your layouts and put together a customized configuration for you. Technical data (quick overview) - Condition: New / Unused - Oven interior dimensions (L x W x H): 3,225 x 1,400 x 2,000 [mm] - Max. oven temperature: 220°C - Oven heating capacity: 39 kW (electric or gas, indirect via stainless steel thermal block) Iodpfeb Dxnwjx Abnstk - Oven air circulation capacity: 4,500 m³/h - Spray booth dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Booth extraction capacity: 6,000 m³/h; 3 kW - Conveying system: Manual rail system (C-rail, max. 200 kg / carrier) - Powder gun: WAGNER or GEMA Your contact person & contact Do you have questions about the system, would you like a technical data sheet/offer, or would you like to check how the system can be optimally integrated into your production chain? Contact us now without obligation! We will be happy to advise you on technical details, customization options, and delivery conditions.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 700 kg, temperature: 220 °C, heating capacity: 150 kW (203.94 HP), workpiece height (max.): 2,500 mm, workpiece length (max.): 6,000 mm, Equipment: lighting, Complete powder coating system including pre-treatment, curing oven, conveying system, and assembly For sale is a powerful, well-designed, and fully coordinated complete powder coating system for highly professional coating processes. The system covers the entire manufacturing process – from thorough surface preparation (3 zones) to precise powder application and reliable thermal curing. (Note: A customized design of the system according to customer requirements is possible upon request!) Key data & technical specifications: - Machine type: Powder coating system / complete system - Condition: New machine - System components: - Combined booth for manual/automatic pre-treatment - Walk-in powder coating booth - Powder curing oven - Manual conveying system - Powder gun - Electrical control system including installation - Usable dimensions (oven / booths): Component dimensions up to L x W x H: approx. 6,000 x 1,500 x 2,000 mm - Oven power / connection value: Design depending on the type of heating (gas / electric) and dimensioning (e.g. approx. 80–150 kW electric or a correspondingly designed gas burner) - Scope of supply: Complete system including on-site assembly Detailed overview of the included system components: 1. Combined pre-treatment booth: - Designed for both manual and automatic pre-treatment steps. Ensures optimal cleaning, degreasing, and application of a primer to the workpieces as a basis for durable coating results. 2. Walk-in powder coating booth: - Ergonomically designed, walk-in booth structure for maximum freedom of movement during coating. Enables efficient powder recovery, quick color changes, and a clean working environment. 3. High-performance powder curing oven: - Uniform heat distribution for homogeneous curing of the powder coatings. Designed for high energy efficiency and stable process temperatures. 4. Manual conveying system: - Robust and flexibly usable transport system for the safe flow of materials between pre-treatment, coating, and curing oven. 5. Ergonomic powder gun: - Modern application technology for uniform powder application, high transfer rates, and first-class surface quality. 6. Central control & electrical system: Itodpfx Ajbhh Awebnek - Complete electrical control system including wiring, control cabinet, and complete on-site installation, ready for operation. Flexibility & Customization Every manufacturing operation has specific requirements for space, component sizes, and throughput. All components and dimensions of this system can be flexibly adapted to your individual operational conditions and customer requirements. Please do not hesitate to contact us to discuss special dimensions, modified conveying systems, or extended levels of automation.

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Iedpfx Aezgx H Hjbnjtk Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Conveyor belt Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Hopper Loading height: 3,307 mm Roller Number of rollers: 1 Roller length: 3,000 mm Maximum roller speed: 32 rpm Permissible total weight: 33,000 kg MACHINE DETAILS Dimensions & Weight Working dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Drive Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V Rated power: 390 kW / 530 hp Fuel tank capacity: 950 l Operating hours: 5,000 h EQUIPMENT Itjdpfx Abszuyuuonok Overband magnet

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Iedpfxob Ny Eys Abnstk Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 Iedpfxjyffqqs Abnstk The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: used, Year of construction: 2019, operating hours: 4,600 h, Internal vehicle number: G400104 Available immediately at our yard in Kaufungen. For more information, please contact: Luis Lucena Viktoria Sologubova Vögele SUPER 1803-3i wheeled asphalt paver with AB 500-3 TV screed – 4,600 operating hours. German-made Vögele SUPER 1803-3i wheeled asphalt paver from 2019, with 4,600 operating hours. Equipped with the hydraulically extendable AB 500-3 TV screed. The paving width can be adjusted continuously from 2.55 to 5.00 m and extended up to 8.00 m with suitable widening attachments. Technical data: * Vehicle number: G400104 * Vehicle condition: Used * Category: Asphalt equipment/road paver * Manufacturer: Joseph Vögele AG * Model: SUPER 1803-3i * Series: 1083 * Year of manufacture: 2019 * Operating hours: 4,600 hours * Rated power: 121 kW at 1,700 rpm * Maximum power: 125 kW at 2,000 rpm * Operating weight: 18,300 kg * Maximum operating weight: 20,800 kg * Permissible total weight: 18,000 kg * Permissible front axle load: 6,500 kg * Permissible rear axle load: 11,500 kg * Undercarriage: Wheeled * CE marking available * Manufactured in Germany * German machine Screed: * Manufacturer: Vögele * Type: AB 500-3 TV * Series: 23AB * Base width: 2.55 m * Hydraulically and continuously extendable up to 5.00 m * Extendable up to 8.00 m with suitable widening attachments * Screed identification number: 23AB3556 * Manufactured in Germany Equipment: * Hydraulically extendable screed * Material hopper with folding side panels * Conveying and distribution system * Operator platform with weather protection canopy * Operator station with excellent all-round visibility * Work lights * Rotating beacon * Rearview mirrors * Wheeled undercarriage * 20 km/h version (as per designation) The maximum paving width of 8.00 m requires the corresponding widening attachments. The scope of delivery and available widening attachments should be checked before purchase. Inspection and functional test possible by appointment. Further information, detailed photos and videos are available upon request. Ijdpfxjyxa Rao Abnjtk Errors, changes and prior sale are reserved.

Condition: used, Year of construction: 1999, A complete screw manufacturing factory with 8 production lines is available for sale. The facility is designed for the industrial production of wood screws, metric screws, and inch screws. The factory includes all necessary machinery covering the entire production process – from wire processing and cold forming to thread rolling and finishing operations. A large inventory of spare parts is also included to ensure long-term operation and maintenance of the production lines. Machinery Overview Thread Rolling Machines 1 × Charng Guey CGR510 4 × Hilgeland thread rolling machines (Year 1987–1992) 1 × Hilgeland (Year 1959) 2 × EWM (Year 1986 / 1989) 1 × Malmedi thread rolling machine 1 × Hilgeland Ronsdorf Pointing Machines 6 × ME10 Itodpfx Ajztfvuobnjk 2 × ME12 Cold Heading Machines / Presses 3 × Sacma 31 (Year 1984 / 1985 / 1986) 1 × Sacma 21 (Year 1984) 2 × Klose MTH 250 1 × Omega 122EM 1 × 5-stage press Jern Yao JBF-17B5SL Deburring Machines 2 × AAG12 4 × AAG10 Centrifuges 10 × units Key Advantages Complete screw production facility Production of wood screws, metric screws and inch screws 8 production lines Large spare parts inventory included Ready for industrial mass production Further technical details and inspection available upon request.

Condition: used, Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range + Heine Conveyor Technology with Reiter electrostatic airless spray technology. Fully automatic industrial painting and coating line for wooden windows, window frames, doors, and wooden elements for sale on behalf of a client. Viewing available. ----- ----- Technical Manufacturer’s Description (Summary): Item 1 Conveyor System: Power + Free circular conveyor, frequency-controlled drives, buffers, stop stations, crossbeams, steel structure according to layout. Item 2: Flood Coating System: flowcomat II-P for priming/pretreatment. Item 3: Spraying Technology: Reiter MAE 7-059 electrostatic airless spray systems with automatic spray nozzles. Item 4: Lifting Technology: MH2T mechanical lifting devices, lifting range approx. 3,200 mm. Item 5 Material Supply: High-pressure paint supply, insulated material supply, paint changeover, Iodpfx Aoy Ty E Hsbnotk ring line, flushing agent supply. Item 6 Control System: Siemens S7-300 for conveyor technology as well as Reiter control system with workpiece recognition and high-voltage power supply. Item 7 Documentation (available separately): Range + Heine order confirmation, layout plan, Reiter order confirmation, and technical descriptions available. ----- Key Technical Specifications: Workpieces: Wooden windows, window frames, doors Workpiece length: up to approx. 5,000 mm Workpiece height: up to approx. 2,800 mm Capacity: approx. 60 window units per shift Coating systems: water-based systems / low-VOC Control system: Siemens S7-300 Electrostatic: 100 kV / 1 mA ----- ----- Price of the above machine available upon request! ----- Price is ex-location. Dismantling, decommissioning, packaging, loading, and all transportation etc. are the sole responsibility of the customer and are not included in the sale or provided by the seller. Further technical data and information in the attached PDF! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable VAT.

Condition: used, Year of construction: 2003, mit Magazin Itedpoztfxvofx Abnjk

Condition: new, power: 24 kW (32.63 HP), fuel type: electric, overall weight: 8,150 kg, Year of construction: 2025, IBS G60 is a mobile gravimetric concrete mixing plant capable of producing not only cement mixtures, but also cold asphalt, recycled cold asphalt, soil stabilization mixtures and soil remediation mixtures. The machine is equipped with two separate aggregate hoppers (5 m³ each), a cement hopper (3 m³), and a water tank (1000 L). Additionally, it can be fitted with two tanks for different types of admixtures, as well as an optional emulsion tank. This makes the unit completely autonomous and enables concrete production directly on the construction site, providing significant economic advantages and ensuring high-quality concrete production. The machine is easy to operate and requires only one operator. Mix recipes are defined by entering the desired quantities of each component through the control panel. At the end of the production process, the machine prints a report containing the values of all ingredients used in the produced concrete, guaranteeing an accurate concrete composition. Thanks to load cells on the hoppers and flow meters on the pipelines, IBS G60 ensures precise real-time dosing of every component, enabling the production of certified concrete in accordance with the UNI-EN 206-1 standard. The IBS G60 can achieve a maximum production capacity of 60 m³/h, depending on the concrete mix structure. If grid power is not available, the machine can be equipped with an integrated diesel generator unit. Additional equipment: Iedpozcwhijfx Abnetk - Admixture tank with dosing system - Bitumen emulsion dosing system - Butterfly valve on the cement dosing system - Aggregate hopper covers - Hydraulic system for mixer positioning and movement - Central lubrication system - Diesel generator unit - Adjustable mixer speed - Printer - Smartphone and tablet control - Remote access and data monitoring

Year of construction: 1993, condition: ready for operation (used), Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible. Itsdpfxjq Ttz To Abnjk

Condition: ready for operation (used), A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: 5000mm. (3) Main Drive Roller Menschner, cast roller Monforts, year of construction: 1987 (4) Tower Shearing Machine Menschner NTS-T-III, year of construction: 1988, fabric width: 300x5500mm, with three shearing cylinders (5) Control panel for auxiliary drives, deflection, transition bridge, roller fabric storage ETF, year of construction: 1988, storage capacity: approx. 80 running meters, with two center controls Erhardt+Leimer. Iodpfsi Atnfjx Abnetk

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Itsdpenxk Ixjfx Abnsk

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Itodpjymfc Aefx Abnek

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Itedpovdu N Aofx Abnok

Year of construction: 1998, condition: ready for operation (used), An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible. Ijdpszh Ng Hsfx Abnetk

Year of construction: 1988, condition: ready for operation (used), A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible. Itodow Dfgwjpfx Abnsk

Condition: ready for operation (used), Year of construction: 2015, A crawler-mounted crushing plant Remax including a land conveyor system is available. 1) Double roll crusher Remax CR 810 Hybrid, year of manufacture: 2015, operating weight: approx. 230t, conveyor belt width: 1600mm, conveyor belt length: 12200mm, discharge belt type: Mobcon, discharge belt width: 1400mm, discharge belt length: 40m, feed hopper volume: approx. 30m², feed hopper length: 4500mm, feed hopper width: 6000mm. Including plate conveyor (1.8m/9.5m) with crawler track, cleaning conveyor (2m/5.3m), transfer station (1800mm/1800mm), electrical equipment and control. 2) Two-part land conveyor system, year of manufacture: 2015, width: 1400mm, belt speed: 1.5m/s, conveying capacity: approx. 1000t/h, length 1/2: 190m/165m. The enclosure of the land conveyor system is only partially available. Documentation available. An on-site inspection is possible. Isdpfx Aoxg Rimjbnstk