Used Worm Gear Screw Jacks for sale (12,544)

Condition: excellent (used), Geared motor, electric motor, electric geared motor -Condition: Geared motor is unused -Speed: 59 rpm Podpeuil S Tefx Ahvogi -Power: 22.0 kW -Design: B3 -Protection rating: IP55 -Shaft: Ø 70 x 140 mm -Dimensions: 1100/400/H435 mm -Weight: 336 kg

Condition: excellent (used), Year of construction: 2012, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK MSA 15 IVR screw compressor Variable speed (inverter) 15 kw engine Efficiency 2.2 m3/min Pressure 8 bar Mileage 11285 mtg Pjdpsv A U I Asfx Ahvjgi Fully functional compressor

Condition: excellent (used), Year of construction: 2009, volume flow: 7.7 m³/h, operating pressure: 8 bar, BOGE S 61 -2 Screw Compressor With heat exchanger Motor 45 kW Capacity 7.70 m3/min Pgjdpfjxkz Tqsx Ahvsi Pressure 8 BAR Year of manufacture 2009 COMPRESSOR FULLY FUNCTIONAL.

Condition: excellent (used), Year of construction: 2001, overall weight: 800 kg, volume flow: 6 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, Screw compressor AIRPRESS APS 60 Engine 45 kw Pgodpfov Sk I Dox Ahvoi Capacity 6.00 m3/min Pressure 10 bar Mileage 15207 mtg The compressor is fully functional.

Condition: excellent (used), Year of construction: 2018, volume flow: 2.15 m³/h, operating pressure: 13 bar, pressure: 13 bar, GARDNER DENVER KBV 18 screw compressor Engine 18.5 kw Pgsdpfx Asvxtxrehvoi Capacity 2.15 m3/min Pressure 13 bar Year of production 2018 The compressor is fully functional.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,373 h, overall weight: 530 kg, volume flow: 1.41 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, Equipment: refrigerant dryer, APS 15 COMBI DRY X screw compressor On 500 l pressure vessel With refrigerant dryer. Motor 11 kW Output 1.41 m3/min Pgjdpjwxzfxefx Ahvoi Pressure 10 bar Year of manufacture 2021 Operating hours 4373 MTG

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, Pgsdpfjyvvlbjx Ahvsi TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: excellent (used), Schneider 4 kw 530 ltr/min only 700 hours Pedpfx Asv A R Hnohvogi

Condition: excellent (used), Year of construction: 2021, operating hours: 2,380 h, functionality: fully functional, overall weight: 268 kg, total length: 1,100 mm, total width: 650 mm, total height: 1,450 mm, power: 5.5 kW (7.48 HP), pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, Atlas Copco GA5 VSD + FF oil-injected screw compressor with approx. 5 kW output, max. 12.75 bar pressure and approx. 1.1 m³ of compressed air per minute, including air dryer and separate 500-litre storage tank (pressure tank), manufactured by OKS, both built in 2021, and a condensate pump. The unit was used for only approx. 3.5 years in a bakery for simple pneumatic applications and for cleaning purposes, approx. 2,380 operating hours, 96% of which were in the 40–60% speed range; first commissioned: August 2021 (was only used regularly until around May 2024). Original price of the system excluding installation: approx. €12,000 net. This screw compressor is one of Atlas Copco’s most energy-efficient compressors, the first choice for low lifecycle costs. VSD (Variable Speed Drive) technology automatically regulates the motor speed based on actual compressed air demand, enabling energy savings of 35–60% on average compared to fixed-speed compressors, depending on the compressed air consumption profile. Very good condition, see also photos. Available immediately. Pedpfx Asyvtxxohvegi Price: € 6,950 net ex-warehouse

Condition: excellent (used), From 2019, 15 kW, with container PM 32-E (32 m3) Podpfsyti Ipex Ahvsgi

Condition: good (used), geared motor, electric motor -Speed: 68 rpm -Power: 0.18 kW -Design: B3 Podpfxodaa Hls Ahvsgi -Shaft diameter: Ø 24 mm Protection rating: Quantity: 1 piece available -Dimensions: 350/175/H190 mm -Weight: 14 kg

Condition: like new (used), Year of construction: 2024, operating hours: 359 h, functionality: fully functional, machine/vehicle number: 1384 - 10024378, overall weight: 295 kg, total length: 1,090 mm, total width: 630 mm, total height: 1,100 mm, motor manufacturer: Super Premium Efficiency IE4, IP55, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 56.4 m³/h, operating pressure: 7 bar, pressure (min.): 7 bar, pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 62 dB, protection type (IP code): IP54, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a Kaeser Aircenter SM 10 screw compressor in very well-maintained condition with low operating hours. The unit is a compact, ready-to-use compressed air station featuring an integrated refrigeration dryer (ABT15) and an oil separator with pressure gauge, making it ideal for industrial applications and workshops. The system received its initial and scheduled maintenance in December 2025. All documentation and paperwork are available. The compressor is immediately operational and can be inspected under power by arrangement. Pjdpfx Aoyvkamehvjgi

Year of construction: 1993, condition: ready for operation (used), A counter-rotating side-feed twin-screw extruder Krauss-Maffei used in the coextrusion process is available. Screw diameter: 40mm, material: rigid PVC, screw speed: 50rpm, throughput capacity: approx. 50-80kg/h, operating hours: approx. 42100h. Including roller guide with subframe. Documentation available. An on-site inspection is possible. Pgedpfsyvix Usx Ahvoi

Condition: excellent (used), Year of construction: 2016, operating hours: 42,734 h, functionality: fully functional, Almig Variable 55 premium screw compressor. 55 kW, 13 bar. 10.58 m3/min Frequency controlled. Psdpfxeufhvye Ahvogi

Year of construction: 2012, condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: 343544, 4-post lift with 4,000 kg lifting capacity and wheel-free jack. Pgedpfxsyvipmj Ahvoi The lift goes up but no longer comes down.

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm Pgjdeytby Ropfx Ahvoi + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: excellent (used), Year of construction: 2020, MANUFACTURER: ATLAS COPCO MODEL: GA75VSDFF PLUS SERIAL NUMBER: API867519 YEAR: 2020 Pedpfx Ahoyvh Uzsvjgi POWER (kW): 75 CAPACITY (m³/min): 13.5 PRESSURE (bar): 12.75 HOURS (DOC/TOTAL): FREQUENCY INVERTER: yes BUILT-IN DRYER: yes, R410a 1.45kg HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard Podpfx Aevvudkshvsgi The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: used, Year of construction: 1966, functionality: fully functional, Equipment: documentation/manual, Good day, I have a Stanko 5A250 gear planing machine for bevel gears for sale. The machine is in very good technical condition and comes complete with all tool setting devices, etc. The price is 6,000 euros. Psdpexwp Ngofx Ahvegi Technical data: Maximum pitch circle diameter: - ratio 10:1: 500 mm - ratio 2:1: 450 mm - ratio 1:1: 350 mm Module: 1.5 - 8 Maximum tooth cutting length: 90 mm Number of gear teeth: 10 - 150 Number of tool speeds: 9 Stroke range of double knife movements: 75 - 472 min-1 Time required for machining one tooth: 8 - 123 sec Power: - main drive: 3 kW - hydraulics: 2.2 kW - cooling: 0.15 kW Machine dimensions: - length: 2200 mm - width: 1600 mm - height: 1800 mm Weight: 8,700 kg

Condition: good (used), functionality: fully functional, operating hours: 4,170 h, load capacity: 1,400 kg, fuel type: electric, battery voltage: 24 V, Technical data: • Manufacturer: Jungheinrich • Model: EJC B14 • Load capacity: 1,400 kg • Electric drive • Integrated charger 24V / 40A • Battery indicator with operating hours counter (approx. 4,170 h as per display) • Initial lift / support arms (see pictures) • Key operation • Robust industrial design Condition: Used condition with normal signs of use (see pictures). Unit is operational. Inspection and test run possible by arrangement. Miscellaneous: Sale as seen Inspection and collection in Hagen a.T.W. possible by arrangement Pgjdpfx Ahsyvfhqjvoi Location: Hagen a.T.W. Sale by company → without warranty & guarantee, subject to errors

Condition: not inspected (used), functionality: unexamined, volume flow: 96 m³/h, final compaction pressure: 10 bar, rotational speed (max.): 3,920 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Volume flow: 1.6 m³/min Final compression pressure: 10 bar Main rotor speed: 3,920 rpm MACHINE DETAILS Motor power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 950 x 700 x 1,000 mm Pgedpfjyr R H Dex Ahvei Machine weight: 500 kg External reference: Lot 94

Condition: not inspected (used), functionality: unexamined, table width: 350 mm, table length: 570 mm, wheel diameter: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Submitting an offer commits you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Flywheel diameter: 1,250 mm Table dimensions: 570 x 350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 1,300 x 1,800 mm Machine weight: 600 kg External reference: Lot 80 Psdpfxoyr N T Ao Ahvogi

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, power: 7.5 kW (10.20 HP), overall weight: 400 kg, overpressure (max.): 11 bar, rotational speed (max.): 2,930 rpm, machine/vehicle number: 1283, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect within the specified period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Rated power: 7.5 kW Motor speed: 2,930 rpm Max. operating overpressure: 11 bar Pjdsyr N Srspfx Ahvogi MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 730 x 660 x 1,100 mm Weight: 400 kg External reference: 70

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 22950, volume flow: 96 m³/h, final compaction pressure: 10 bar, rotational speed (max.): 3,920 rpm, No minimum price – guaranteed sale to the highest bidder! Psdpfjyr Nffex Ahvjgi Submitting a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Volume flow: 1.6 m³/min Final compression pressure: 10 bar Main rotor speed: 3,920 rpm MACHINE DETAILS Motor power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 950 x 700 x 1,000 mm Machine weight: 500 kg External reference: Lot 71

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 Pgjdev Ehbbjpfx Ahvji min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell