Used Worm Gear Screw Jacks for sale (12,545)

Condition: used, Van Beek screw conveyor Entirely made of stainless steel Featuring cleaning hatches along the entire length Motor power: 2.2 kW Speed adjustable via built-in frequency inverter Nwedpfxsywgm Ee Ahvod Screw diameter: 160 mm Length: 3400 mm Conveying height: 2140 mm Equipped with magnetic rod at the inlet

Condition: good (used), I am selling this machine, equipped, already disconnected, stored in stock. Video of the machine can be sent. Nwedpfotuipmsx Ahvjd max. wheel diameter 710 mm max. module 10 Spindle speed : 700-2800 1/ min. Machine weight : 13,500 kg

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Njdpfeyg H Tcsx Ahvjwd

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Max. working pressure: 9,5 Bar Power: 100Hp / 75KW 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Nwjdpfjuf Nibex Ahvod Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 4 kW (5.44 HP), We offer you: Compressor with boiler and refrigeration dryer Manufacturer: Kaeser Nwsdovygf Ispfx Ahvjd Type: SX 6 / TA 11 Year of manufacture: 2004 / 1997 Subject to changes and errors in the technical data and information as well as prior sale! Location: Berlin

Condition: good (used), Year of construction: 2021, We offer you: Screw Compressor Manufacturer: BOGE Type: C 12-2 LF Year of manufacture: 2021 Technical data: - Maximum pressure: 10 bar Nsdpfxew Ra Eme Ahvswd - Volume flow: 0.52 - 1.76 m3/min - Motor power: 11 kW - Motor speed: 2381 rpm - Dimensions (W x D x H): 1610 x 915 x 1380 mm - Weight: 557 kg Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical specifications and details are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 1998, operating hours: 80,000 h, functionality: fully functional, overall weight: 6,550 kg, total length: 3,700 mm, total width: 2,120 mm, total height: 2,400 mm, motor manufacturer: Siemens, power: 315 kW (428.28 HP), volume flow: 46 m³/h, operating pressure: 10 bar, noise level: 72 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 2 screw compressors with special voltage of 6000 Volts Manufacturer: Atlas Copco Model: ZR 315-10-50/E Operating pressure: 10 bar Volume flow: 46 m³/min Year of manufacture: 1998 Operating hours: approx. 80,000 hours Cooling: water-cooled Motor manufacturer: Siemens Power: 315 kW Speed: 1482 rpm !!! Voltage: 6000 Volts !!! Dimensions: Length: 3700 mm Nsdpfxoywcr Ro Ahvjwd Width: 2120 mm Height: 2400 mm Weight: 6550 kg

Condition: used, Year of construction: 1977, max. wheel diameter 1000 mm gear width 180 mm max. module 7 min. module 0,5 Nwjdpfoyb S H Dox Ahved min. ram stroke 16 mm max. ram stroke 180 mm table hole 160 mm total power requirement 4 kW weight of the machine ca. 5,2 t

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation Nwodpfjvuk N Tjx Ahved

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Type: LR87/D132S4/47.58/M1/270 i 47.58 with forced cooling fan -Speed: 30.47 rpm Nwjdpfx Ahsyug E Ieved -Power: 5.5 kW -Shaft: Ø 50 x 100 mm -Design: B3 -Protection rating: IP54 -Quantity: 1 piece available -Price: per piece -Dimensions: 885/320/H300 mm -Weight: 115 kg

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 Nwedpfx Asxt D Hxohvsd -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm -Protection class: IP65 -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 7x geared motors available -Price: per piece -Dimensions: 455/180H170 mm -Weight: 10.5 kg/pc.

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm Nedpfexl Sbnex Ahvswd -Protection rating: IP54 -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc.

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake -Manufacturer: Lenze, bevel gear motor -Transmission: Type G50BH121MVAR2C00 -Speed: 106.0 rpm / Torque: 65 Nm -Engine: Type M55AP080M045E00CTZ -Power: 0.75 kW / 50 Hz -Shaft: Ø 25 x 45 mm -Protection rating: IP55 -Number: 4x geared motors available -Price: per piece -Dimensions: 490/160/H230 mm Nwjdpfxjxt Dnij Ahvjd -Weight: 20.5 kg/pc.

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm gear width: * mm max. module: 3,5 min. module: 1,25 total power requirement: * kW Nwedpfxsyud Tpj Ahved weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm Nwsdpjyud Tiofx Ahved gear width: * mm max. module: 3,5 min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm Njdpsc U I Emjfx Ahvswd -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Njdpfxoyv Ipls Ahvewd Bevel gear analysis ROTEC T50 GA2 Color unit company Binks

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 8 (10) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW Njdpfx Asyv Ipfehvowd weight of the machine ca. 25,00 t

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Njdox R U Hmspfx Ahvswd Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: excellent (used), Year of construction: 2019, MANUFACTURER: KAESER MODEL: DSDX245 S/N: 7260862 YEAR: 2019 POWER (kW): 132 Nwjdpfsycv A Ssx Ahved CAPACITY (m3/min): 25.15 PRESSURE (bar): 8.5

Condition: used, Year of construction: 2001, functionality: fully functional, wheel diameter: 350 mm, gear diameter: 400 mm, wheel width: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 600 rpm, workpiece weight (max.): 1,020 kg, total height: 3,048 mm, total length: 3,658 mm, total width: 2,590 mm, feed length X-axis: 440 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, rotational speed (min.): 600 rpm, pivoting range: 80 °, rotational speed (max.): 6,000 rpm, spindle bore: 80 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, travel speed (max.): 10,000 mm/min, workpiece diameter (max.): 400 mm, We offer this used Gleason-Pfauter P400G (400mm/800mm) CNC gear grinder machine, year of construction 2001. Type: Gear Grinders Model: P400G Brand: GLEASON PFAUTER Stock Number: GH1076 Serial # 28-727 Condition: Used Year: 2001 Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder Maximum Workpiece Diameter: 400 mm/800mm / 15.74”/31.48" Maximum Grindable Profile Depth: 35 mm / 1.37” Maximum Grinding Wheel Diameter: 350 mm / 13.77” Maximum Grinding Wheel Width: 50 mm / 1.96” Diameter of the Spindle Journal for Retaining: 80 mm / 3.14” X-Axis Travel (Radial): 440 mm / 17.32” Y-Axis Travel (Tangential): 200 mm / 7.87” Z-Axis Travel (Axial): 400 mm / 15.74” Maximum Grinding Head Pivoting Angle (+A-A): +/- 40° Maximum Table Load: 10 kN / 2,248 Lbs. Worktable Diameter: 380 mm / 14.96” Worktable Bore: 80 mm / 3.14” Tailstock Travel Distance: 650 mm / 25.59” Tailstock Locating Bore: 90 mm / 3.54” Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM Tool Speed (Spindle-S): 600 to 6,000 RPM Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM Nwjdoyuqrrspfx Ahvsd Dresser Travel Distance (Z2-Axis): 200 mm / 7.87” Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM Maximum Dressing Wheel Diameter: 150 mm / 5.90” Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Nodpfx Aowzypushvjwd Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and Nwsdsv T Nqajpfx Ahvod crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: excellent (used), Geared motor, electric motor, electric geared motor -Condition: Geared motor is unused -Speed: 59 rpm -Power: 22.0 kW -Design: B3 Njdjuil S Topfx Ahvswd -Protection rating: IP55 -Shaft: Ø 70 x 140 mm -Dimensions: 1100/400/H435 mm -Weight: 336 kg

Condition: excellent (used), Year of construction: 2012, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK MSA 15 IVR screw compressor Variable speed (inverter) Njdov A U I Aspfx Ahvewd 15 kw engine Efficiency 2.2 m3/min Pressure 8 bar Mileage 11285 mtg Fully functional compressor