Used Working Center for sale (53,721)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Gtodpfxjixxwmo Ahvew Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) Gtedpfx Ajuickyehvow N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of Gtjdpfx Aet Ul Dnehvow machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. Gedpfx Ahol Ikzgevetw 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, Year of construction: 2000, SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. TWIN - CE - Axis strokes: X 3400 mm Y 1800 mm Z 1250 mm B unlimited Gtodewrc Tdepfx Ahvsw C 400° - Head Type 4 (7.5 kw cad.) - Max rotation speed 24,000 rpm - N. 2 variable geometry tables TGV - Vacuum pomp - Yaskawa drivers - Osai control - Cabin on 4 sides + roof - Year 2000 - CE rules

Condition: used, - “DAEWOO” ACE V50P vertical machining center – Pallet changer – 30 stations for tools on chain – availability of over 40 tools/tool ​​holders, some of which are reamers with micrometric adjustment and 3 tool holders with tank for lubricant/coolant liquid - CNC Fanuc - machine still installed in the workshop, operational until 2021 - availability for any test - use and maintenance book - Price and detailed technical characteristics on request - Gtedpfx Aenr R A Iehvjw

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles Gsdpfx Aopvai Dshvetw N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Safety system with bumper system on the operating head N° 1 vacuum pump 100 m3\h Automatic lubrication

Condition: ready for operation (used), Year of construction: 2010, 5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - Strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - N. 2 working tables 1400x3000 mm - N. 3+3 rails per each working table - N. 3+3 CSR supports per each table - Head type CS 44 (n. 4 motors 7.5 kW each) - Rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - N. 2 inverters - Wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - Remote support Gedpfxek Uicge Ahvjtw - Communication PC/CN TCP/IP - Cabin + roof - CE rules - Year 2010 COMPLETELY RECONDITIONED

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for Gjdpfetz H Egox Ahvetw the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: Gjdpfjux Si Hox Ahvstw 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: used, Vertical Machining Center MAZAK VTC-20B – Year of manufacture: 1998 • CNC Control: Mazatrol M Plus • Axis Travels: X = 1660 mm, Y = 510 mm, Z = 510 mm • Spindle: • Taper: ISO 40 • Max speed: 7,000 rpm • Power: 7.5 kW • Tool Changer: • 24-position automatic tool changer • Feed Rates: Gtjdpfx Aowdrftehvsw • Rapid traverse on all axes: 30,000 mm/min • Table: • Size: 2000 x 510 mm • Max load: 500 kg • Cooling System: • Standard integrated system • Dimensions & Requirements: • Footprint: approx. 3200 x 2700 x 2800 mm • Weight: approx. 5200 kg • Compressed air: 6 bar • Note: Machine in full working condition, available for inspection on request

Condition: good (used), Machining center HOMAG BAZ 723 58/18/FC 4-axis CNC portal machine with 2 moving tables and edge banding unit Godpfx Ahexc Ir Revetw

Condition: used, SECOND-HAND WORKING CENTER FOR DOORS AND WINDOWS SAOMAD OPERATOR 8 - CE RULES Butting disk saw: - Motor power Hp 4 - Saw shaft revolution speed 3000 rpm - Disk saw diam. 400 mm. Tenoning side - Min. work piece lenght mm. 200 - Max. work piece lenght mm. 2800 - Min/max. work piece thickness mm. 30/120 - N. 2 shafts Sash profiling Gtjdpfx Ahewrb Tvevew - Motor power Hp 0 - N. 4 shafts Glass stop recovery Hardware grooving unit Roller advance Wooden piece return roller Max. feeding speed 20 m/min - Year 2000

Condition: used, Year of construction: 2008, SECOND-HAND 5-AXIS CNC WORKING CENTER BACCI MOD. TWIN Gedpfx Ajwrcn Ishvstw - Strokes: x = 3400 y = 1500 z = 850 b = endless c = 400° - Type 4 head 7.5 kw - 0-24.000 rpm - N. 2 tgv woriking tables - OSAI control - Enclosed cabin on 4 sides + roof - No. 2 Becker vacuum pumps 100 m³/h - Serial no. 477 - CE rules - Year 2008

Condition: good (used), Year of construction: 2008, BROTHER B00 CONTROL UNIT AXIS TRAVELS: TRAVELS: Z 415 X 550 Y 400 MM. DISTANCE BETWEEN TABLE AND SPINDLE NOSE 645 MM. RAPID TRAVELS XYZ 70 M/MIN. Gtodsu Spr Espfx Ahvow WORKING SPEED XYZ 1-20000 MM/MIN. REPEATABILITY ERROR +/- 0.003 MM. POSITIONING ERROR 0.005 ON 300 MM. N.2 TABLES WORKING AREA 600x425 MM. PERMITTED WEIGHT 200 KG. TABLE POSITION 3.4/180° SPINDLE POWER 16 KW SPEED 12000 RPM HSK TAPER A 40 RIGID TAPPING 8000 RPM MAX TOOL CHANGE TOOL MAGAZINE CAPACITY 40 PLACES TYPE OF SELECTION RANDOM TOOL CHANGE TIME 0.9 SEC. CHIP/CHIP TIME 2 SEC. OPTIONS CHIP CONVEYOR SPINDLE OVERRIDE WORK AREA LAMP ROTARY JOINT COOLANT THROUGH SPINDLE N.2 LEHMAN IV AXIS TABLES COMPLETE WITH COUNTER-SUPPORT

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Gtodougpwnepfx Ahvow Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Year of construction: 2021, operating hours: 9,159 h, condition: used, machine/vehicle number: 374-19, the documentation is attached as a PDF Gtedjyn Ni Nopfx Ahvow

Year of construction: 2021, operating hours: 16,807 h, condition: used, machine/vehicle number: 374-20, the documentation is attached as a PDF Gedoyn Nkaopfx Ahvjtw

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Gtjdjxc I Dgspfx Ahvew Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: new, max. workpiece length 4500,6000 mm profile spindle 3 Stück main drive 24 kW Control Siemens 840d Gtsdpfxeyrtyyo Ahvjw Working Process Logos Life Evo XS 2345 ----- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe.

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Gsdpfxeyn Rkue Ahvotw Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Gjdpfx Aow A Nnpehvjtw

Condition: new, Year of construction: 2023, Industrial heavy duty trailer with a payload of 30 tons on 60% of the loading area at 6 Km/h. The trailer has heavy duty Vulkollan drums with a height to loading area of 510 mm. The loading area has the dimensions 6000 x 2400 mm. The transport floor is lined with 40 mm spruce The steering is all-wheel steering and the drawbar is 1600 mm long with drop safety device and forged towing eye with hole 40 mm. On the outer frame there are 6 stops for securing the load on each long side. The paint is in RAL 2000 or 2004 in new production gladly on customer request. Gedokz Uyuepfx Ahvstw

Condition: new, functionality: fully functional, machine/vehicle number: 0700, empty load weight: 3,700 kg, maximum load weight: 50,000 kg, overall weight: 53,700 kg, axle configuration: 4x2, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 880 mm, total length: 6,600 mm, total width: 2,200 mm, total height: 880 mm, tire size: 559x356, tire condition: 100 %, maximum speed: 6 km/h, color: orange, Heavy-duty transport trolley with a payload of 50,000 kg over 60% of the loading area at 6 km/h. Dimensions: 5000 x 2200 x approx. 880 mm Transport floor: Douglas fir, 50 mm, countersunk and bolted Gedpfx Asyq Rr Rohvetw Tyres: Cushion tyres 559 x 356, 8-ply Steering: All-wheel steering with adjustable track and tie rod Drawbar head at front and rear for towing drawbar Trailer is suitable for operation in both directions Coating: RAL 2000 Four welded lashing eyes on each longitudinal side Accessories: One double-acting chock Documentation fixed in the DOKU box on the frame Reflectors on three sides Towing drawbar 2000 mm with fall protection and height adjustment

Condition: new, first registration: 07/2025, loading space length: 6,000 mm, loading space width: 2,200 mm, color: orange, Year of construction: 2026, operation weight: 30,000 kg, TPW 30 AL - PA with all-wheel steering and oscillating axles Gtodpfxohbq Izs Ahvow Dimensions Length: 6000 mm Width: 2200 mm Tyres: Bands 425x305, 2x150 twin wheels, 8-fold wheel mounting Drawbar with 40 mm towing eye and height adjustment with fall protection Transport floor: 40 mm Douglas fir wood Coating: RAL 2000 Stop blocks per longitudinal side: 4 pcs, see load securing