Used Wood Shavings Press for sale (18,494)

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Fgsdjyz R Eyjpfx Acwoa Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tilt device Technical Specifications: Manufacturer: Presto Model: CC 50 M Year: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput depending on bulk density: 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t Fgjdpfoyz R Etox Acwsa 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video is available on our website or YouTube channel. Please note: All technical data is based on information from the manufacturer. We accept no liability for the details provided or for any possible errors. Subject to prior sale; offer is non-binding and may be revoked at any time. Inspections are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation - Oil cooler - Motor: 7.5 kW Fgjdpex Hhzvefx Acwoa - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Original DTR + CE documentation – Perfect condition, year of manufacture 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Fgsdpeyz Rwijfx Acwea Operating hours: 3,297 h

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Fgedjyz In Eopfx Acwea Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions at the top (length/width): 1000x600mm - Loading hopper dimensions at the bottom (length/width): 650x600mm - Rotor width: 570mm - Motor: 15kW Fsdpfx Acjytd Tgswoga - Screen: 16x12mm - Knife dimension: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions (length/width/height): 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German-made – Not repainted – In very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35,900 PLN Net price: 8,540 EUR according to a rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7262 TECHNICAL DATA - Top loading hopper inlet 780x620mm - Bottom loading hopper inlet 650x620mm - Outlet for shredded wood Ø160mm - Rotor working width 600mm - Rotor diameter 248mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives 30 pcs - Knife dimensions 30x30mm - Screen 20x20mm - Press drawer - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight 1200kg ADVANTAGES – German-made – Original DTR documentation Fsdpfx Aoytf Ixscwsga – Not repainted – Auto-reverse system – Press drawer – Very good condition – Used wood chipper Original photos Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate (4.2 PLN/EUR) (Prices may vary with larger currency fluctuations)

Condition: excellent (used), Catalogue number 7260 TECHNICAL DATA - Charging hopper inlet: 870x730 mm Fgsdpfjytd R Eex Acwea - Rotor working width: 710 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 19 pcs - Knife size: 75x40 mm - Screen: 15 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: diameter 250 mm - Dimensions (L/W/H): 2350x1400x1670 mm - Weight: 1360 kg ADVANTAGES – Pressing drawer – Very good condition – Used shredder Net price: 37,900 PLN Net price: 9,020 EUR depending on the rate of 4.2 EUR (Prices may change in case of larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg Fgsdpfxoyi Tn So Acwsa ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2006, functionality: fully functional, Baler Presto CC 30 V, year of manufacture 2006, incoming Technical data: Manufacturer: Presto Model: CC 30 V Year: 2006 Pressing force: 30 t Cycle time: 34 s Drive power: 11 kW Filling opening: 1080 x 950 mm Filling volume: 0.69 m³ Tying: 4-fold, automatic Throughput at bulk density of 35 kg/m³ - 2.0 t Fgedpfx Asyz Il Docwja 60 kg/m³ - 3.2 t 100 kg/m³ - 4.8 t Bale size: 700 x 950 mm Bale weight: up to 350 kg Dimensions: 3650 x 1770 x 2150 mm (LxWxH) Machine weight: approx. 3900 kg Materials: Paper, cardboard, film Please note: All technical specifications are based on the manufacturer's information. We accept no liability for the details provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewing is possible by appointment. Sale is ex works, prepayment, without warranty or guarantee.

Condition: excellent (used), pressure 6,3 t throat 200 mm stroke 200 mm dayligth max 500 mm Fedpfxowuu A Aj Acwsga table surface area 450 x 420 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm Fjdpfx Ajv Nracocwjga turning speeds 45 - 465 U/min Control Siemens total power requirement 13 kW weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Retrofitted in 2014, Siemens control system.

Condition: like new (used), Year of construction: 1991, Floor space: 1 m x 0.70 m x H 2 meters. Gooseneck 250. Control panel on the left. Machine in very good condition – used very little. Table 400x360. Drawer with opening. Fjdpjyz Dxaofx Acwega

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel Fgodpfxoyz Dtds Acwea - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Fgjdpfxoyz Dr Ts Acwsa Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm Fsdpfxeyz Dgwj Acwsga dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: used, sanding height 150 mm 390 mm Sanding paper width 400 mm Fedpfxjyz Dfaj Acwsga engine tba KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking.

Condition: excellent (used), pressure 16 t weight of the machine ca. 16 t Fgjdpjyrhmhjfx Acwoa

Condition: excellent (used), Catalog number 6726 Fsdeignt Uspfx Acwsga TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V Fgedpfeyzzh Ejx Acwsa electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Fjdpfx Aohbdg Uocwsga Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Fedpoyzzgnofx Acwjga Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Binding: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated specifications or possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Fgodpfowyc H Tsx Acwsa Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Fgjdpfx Aswyda Uscwoa Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Type 200-20 machine no. 117/6 Fsdpfxjic Rn Ue Acwega stroke 200 mm pressure force 20 t spindle diameter 60 mm