Used Wood Drying for sale (18,173)

Condition: used, Year of construction: 1995, machine/vehicle number: IDC000049, Vecoplan VZ 60/34 V shredder For shredding wood waste and other products. Inlet width 600 mm; Inlet height 340 mm; Hnsdpjrdykvefx Afiou Number of cutting plates 28; Cutting inserts 40 x 40 mm; Rotor speed approx. 450 rpm; Chip or shredded product size approx. 30 mm; Capacity 2 m3/hour; Input rotor motor power 11 kW

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: Hnedewp Rqfopfx Afisu • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), Catalog number 7411 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor 1.5kW - toothed pulling shaft from the top - upper shaft motor 1.5kW - belt feeder - feed belt length 2250mm - feed belt width 400mm - main motor 30kW - auto reverse - overall dimensions length/width/height 4300x1630x1000mm - weight 1800kg – German production - auto reverse (possibility of adjustment) - used chipper, very good condition Net price: PLN 69,900 Net price: EUR 16,450 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) Hnedpfx Ajt N Tt Tjfiou

Year of construction: 2025, condition: new, 11 m² dryingsurface, powersupply:7,5 kW, totally in inox-steel with temperature and humidity control, Hnedpfxsb Ipxwe Afiou for fruits and vegetables, meat,...

Condition: excellent (used), Year of construction: 1990, Radial saw ZS135 Year of manufacture: 1990 On stand With pneumatic clamp Hydraulic feed brake Hnodpjt Sin Ssfx Afisu Saw blade for aluminium 2 kW / 380 Volt

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,250 h, functionality: fully functional, mileage: 1,250 km, power: 22 kW (29.91 HP), first registration: 09/2025, overall weight: 750 kg, fuel type: gasoline, operation weight: 750 kg, For sale: Saelen Premium 22 ER wood chipper. 22 HP Briggs Vanguard twin-cylinder petrol engine, hydraulic feed. Recently serviced for sale. Trailer chassis weighs less than 750 kg. Hnsdpfx Ajxgblxsfisu Maximum diameter: 13 cm, output: 8 m³/h. In very good condition. Asking price: €8,500 VAT included. Feel free to contact me for more information.

Condition: used, Chain conveyor IDC000113 - total length: 30 m - width: 1 m - height: 850 mm Hedpfjvlc Ngsx Afisnu - electric motor: 11 kW

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL SPECIFICATIONS - Infeed width: 400 mm - Infeed height: 150 mm - Shaft width: 450 mm - Shaft diameter: 550 mm - Number of knives: 2 pcs - 3 toothed feed rollers each from above and below, 2×2.2 kW - Electric auto-reverse - Reversing mode - Belt feeder - Feeder length: 5,100 mm - Belt feed width: 400 mm - Main motor: 30 kW - Chipper dimensions (L/W/H): 2600x1500x1530 mm - Total feeder dimensions (L/W/H): 5200x560x910 mm - Weight: approx. 3,000 kg – with belt feeder – electric auto-reverse (adjustable) – reversing mode – Used chipper, in very good condition Net price: 68,900 PLN Net price: 16,200 EUR at an exchange rate of 4.25 EUR Hnjdpfxom Nb Dvj Afieu (Prices may change with significant rate fluctuations.)

Year of construction: 2013, condition: new, wood baking oven with direct heating Hjdpfx Aeygm Ujfienu baking area 1,0 x 0,7 x 0,25 m (L x W xH) 8cm heatingstones also available with fully automatic pelletfiring system

Condition: used, Manufacturer: Bruks Model: 1500M Hnodpfxowagnbj Afieu Productivity: 50-100 m3/h Electric motor: 110 kW After overhaul

Condition: excellent (used), CATALOGUE NUMBER 7613 Technical data: - inlet width 650mm - inlet height 300mm - shaft width 660mm - knife length 660mm - number of knives 2pcs - sieve dimensions 90x100mm - 2 toothed pulling shafts from the bottom - lower shaft motor 3kW - 2 toothed pulling shafts from the top - upper shaft motor 3kW - belt feeder - feed belt length 2700mm - feed belt width 630mm - main motor 75kW - auto reverse Hsdpfjwa Aqlsx Afienu - reverse gear - overall dimensions length/width/height 5350x1300x1300mm - weight 4200kg ADVANTAGES – Italian production – auto reverse (possibility adjustment) - reverse gear - used chipper, very good condition Net price: PLN 149,900 Net price: EUR 35,270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 2025, condition: new, 22 m² dryingsurface, powersupply:7,5 kW, totally in inox-steel Hsdpfx Afob Iztueijnu with temperature and humidity control, for fruits and vegetables, meat,...

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation. Hnsdpfx Aetmtf Rofiju

Condition: excellent (used), CATALOGUE NUMBER 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of shredded material 160mm - shaft width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - sieve dimensions 25mm - pulling pressure shaft at the entrance 0.75kW - toothed pulling shaft from the bottom 1.8kW - toothed pulling shaft from the top 1.8kW - vibrating chute length 4470mm - vibrating chute width 710mm - vibrating chute motor 2.2kW - main motor 55kW - auto reverse - diameter of the exhaust port 260mm - vibrating chute dimensions length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight approx. 5500kg Hsdpfxelrvg Uo Afisnu - German production - very low mileage - original documentation - auto reverse (adjustable) - used chipper, very good/perfect condition Net price: PLN 159,900 Net price: EUR 37,620 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations, the price may change)

Year of construction: 2020, condition: new, Kreuzmayr fruit drying cabinet OTS 4 Hnjdpfx Ajygm Isfiju drying surface 4m³ stainless-steel construction

Condition: repair required (used), Disc chipper Bruks IDC000127 Hnodpovzw Tfofx Afiju - infeed 220 X 280 mm - without electric motor

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5.5kW - 3 toothed pulling shafts from the top - upper shaft motor 5.5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2.2kW - main motor 90kW Hnsdpfx Asma Hv Defieu - reverse gear - auto reverse - total machine dimensions L/W/H 4600x2350x1700mm - total dimensions of the feeder L/W/H 4550x980x970mm - total weight approx. 11000kg - German production, - auto reverse (adjustable) - used chipper, very good condition Net price: PLN 285900 Net price: EUR 67270 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Hjdpforl Ra Hjx Afijnu Drying capacity - 10t/h

Condition: excellent (used), CATALOGUE NUMBER 7620 TECHNICAL DATA - shaft width 410mm - top length 2220mm - cast iron tops - both tops adjustable - original cast iron guide Hnedpswbz Husfx Afisu - engine approx. 3kW - dimensions length/width/height 2220x800x1140mm - weight 504kg ADVANTAGES - German production - used planer - very good condition Net price: PLN 6900 Net price: EUR 1630 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Belt conveyor for wood pellets Manufacturer: Sew-Eurodrive Length: 23cm Width: 1 m Power: 9.2kW Hnjdpfx Aewv Sn Eefiou

Condition: excellent (used), functionality: fully functional, Catalogue number 7442 TECHNICAL DATA - Infeed width: 410 mm - Infeed height: 120 mm - Shaft width: 430 mm - Shaft diameter: 400 mm - Number of knives: 2 pcs Hnedeufxlropfx Afiou - Screen size: 60x60 mm - Top: driven, toothed shaft - Bottom: 2 driven, toothed shafts - Feeding belt length: 4100 mm - Feeding belt width: 400 mm - Autoreverse - Main motor: 30 kW - Feed motor: 2×1.5 kW - Machine dimensions (L/W/H): 2300x1550x1500 mm - Feeder dimensions (L/W/H): 4400x500x1000 mm - Weight: 2135 kg ADVANTAGES – Made in Poland – Autoreverse (adjustable) – With conveyor belt – DTR documentation – used shredder, in very good condition Net price: PLN 76,900 Net price: EUR 18,090 based on a 4.25 exchange rate (Prices may vary with significant currency fluctuations)

Condition: used, Wood chipper Bruks 1500M IDC000079 - Manufacturer: Bruks - Chip screen: BS2 - Scraper conveyor - Belt conveyor Hsdpfx Aot D Dhdefionu - Cyclone - capacity: 50 m3/h

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic blade extension - sawing units adjustable at 45° - manual spacing of sawing units - min. cutting length at 90° 300mm - max. cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90 degrees 90mm - pneumatic clamps 2pcs - control buttons - material support 3pcs - main engine 2×1.1kW - diameter of the exhaust port 2x90mm - dimensions L/W/H 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production Hsdpfx Afewbz Uxoionu – tiltable sawing units - used saw, very good condition Net price: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Drum wood chipper IDC000025 Hedpfstqz Sfox Afisnu - Manufacturer: Erjo, - Model: 204 MA, - Electric motor: 55 kW, - Capacity: 20-40 m3/val.

Condition: used, Kahl - Wood Pellet cooler Hnjdpfx Afsv R Tdfeiou 3-5 tons per hour