Used Wood Dryer Wood Dry Chamber for sale (10,821)

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Bdjdpfx Aswpi Rkjizsc Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER Bdjdpfsy Twahjx Aizec EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES CONNECTION NEW/USED USED

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I Bedpfxjx R D Efe Aizsdc E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: good (used), Year of construction: 2000, Tempering unit Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Voltage: 230 V Refrigerant type: R134.6 Bdsdpfx Ajgvddpeizsc

Condition: good (used), Year of construction: 1999, Compressed Air dyer Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm Bsdeg Nk Abepfx Aizsdc

Condition: used, Granulate Dryer, Granulate Drying Unit, Hot Air Dryer, Used Machine Manufacturer: MOTAN - Model: MDC400; Serial No.: 1753 (Year: 1999) Bdedjxv R T Dspfx Aizsc - Airflow: 400 m³/h - Heating Capacity: 21 kW - Electrical Data: 400 V; 22.5 kW; 34.5 A

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Bdodpfoxlpv Njx Aizec Manufacturer: Motan Type: NS-D05-ST-2 Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Electrical data: 240 V; 2.4 kW; 10 A - with granulate suction unit - with electric heating

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer Bdedpfx Ajy Tmrmeizjc - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches Bdjdpfxefzq Sto Aizjc • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Bsdpfsflmdbsx Aizjdc Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access Bedpsfy T Szsfx Aizsdc • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: used, Compressed Air Refrigeration Dryer, KAESER Type TA 5 Serial No. 2143, Item No. 1.7917.2, Year of manufacture 2002 Throughput: 600 liters/min. Operating pressure: max. 16 bar Refrigerant: R134a Charge weight: 0.28 kg Compressed air connection thread: 3/4" Power consumption: 250 Watts Power supply: 230 Volts, 50 Hz, 2 Amps - Condensate drain: DN 6 mm Space requirement (L x W x H): 630 x 500 x 780 mm Weight: 70 kg In good condition Bjdpfxjy Ra Dwj Aizedc

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm Bdodey Ragfepfx Aizsc - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: ready for operation (used), Year of construction: 2016, operating hours: 49,000 h, functionality: fully functional, volume flow: 600 m³/h, pressure: 10 bar, operating pressure: 10 bar, input voltage: 400 V, pressure (max.): 10 bar, nominal power: 55 kW (74.78 HP), Equipment: compressor, type plate available, Well-functioning Ingersoll-Rand frequency-controlled screw compressor, 55 kW, 10 m³/min, max. 10 bar. Bedpfoy Sv Riex Aizsdc

Condition: new, Year of construction: 2026, total length: 1,010 mm, total width: 680 mm, total height: 1,605 mm, power: 7.5 kW (10.20 HP), fuel type: electric, pressure (min.): 6 bar, pressure (max.): 8 bar, Equipment: CE marking, DUCOMP BRD 7.5kW - Screw compressor + Air Tank + Dryer In BRD Series Compressors, the compressor and dryer are mounted on the air tank and their Bsdpfxsygdk Ej Aizodc connections are made. It is shipped ready for operation thanks to its internal tank and dryer.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used MTA DEIT165 refrigeration dryer Bjdpfx Aoy Nkl Njizedc 16.50 m3/min 16 bar Year of manufacture 2016

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Bdodpfx Ajy Spnueizsc Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Rated speed : 2970 n/min Motor rating : 430 kW

Condition: good (used), Year of construction: 2002, machine/vehicle number: 2344, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, total length: 800 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 100 kg, For sale is a hot air container dryer, model CKT 70, from the renowned manufacturer Werner Koch Maschinentechnik. This unit is specifically designed for the efficient drying of plastic granulates, and with a heating capacity of 6 kW, it delivers consistent performance to meet industrial requirements. Transport and loading can be arranged across Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges are welcome! Machinery Trade PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Bjdpfxsy I Rpfe Aizjdc Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.

Condition: new, Cefla painting system Bdsdpfowhbrwsx Aizjc

Condition: excellent (used), Year of construction: 2008, Refrigerated dryer Manufacturer: Kaeser Model: TE 121 Year of manufacture: 2008 Bodpfx Aiey Sgh Eszedc Volume flow: max. 12.7 m³/h

Condition: new, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Bodexnptgopfx Aizsdc Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device.

Condition: new, machine/vehicle number: 1.127-001.0, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 139 kg, warranty duration: 24 months, water tank capacity: 50 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.127-001.0 Drive type: Battery Drive: Propulsion by brush rotation Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank (l): 50 / 50 Theoretical area performance (m²/h): 2040 Battery type: GEL - maintenance-free Charger power supply (V / Hz): 230 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 139 Weight without accessories (kg): 40 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Bsdpfx Aexnyhnjizodc Scope of delivery and features: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER V-shaped 900mm suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water stop after releasing the dead man's switch. The machine is easy to operate thanks to a small number of yellow-coded controls. - Highly maneuverable and easy to use. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning tools can be carried. - Very good value for money.

Condition: like new (used), Year of construction: 2023, operating hours: 10,626 h, functionality: fully functional, Used Atlas Copco FD220VSD-G Refrigerated Dryer - Premium Bdjdpfxoy Iwtdo Aizoc 13.20 m³/min 14 bar Year of manufacture: 2023 Operating hours: 10,626

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The dryer is overhaulled , new dessicant , new set of valve , new dew point sensor. Bsdpfey R Szhex Aizsdc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, The dryer is overghaulled , new dessicant , new valves kit , new dewpoint sensor. Bdsdpfoy R Szbsx Aizoc