Used Wood Chips for sale (10,746)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Wood Chipper JOCAR JD 500 Year of manufacture: 1995 Technical condition: Very good Technical specifications: Dcodpfjzut A Sex Aiiop Main motor: 200 HP Maximum material cross-section: 300 × 400 mm Feed motors: 2 × 7.5 HP Infeed belt conveyor with vibrating chute Outfeed belt conveyor The price includes dismantling and loading onto the truck. Installation and commissioning are available at an additional cost.

Condition: excellent (used), CATALOGUE NUMBER 7176 TECHNICAL SPECIFICATIONS - Hopper inlet 1050x600mm - Outlet for shredded wood, diameter 160mm - Rotor working width 590mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives: 14 pcs - Knife dimensions: 30x30mm - Screen: 10x12mm - Clamping drawer - Electric auto-reverse - Dimensions (L/W/H): 1900x1200x1530mm - Weight: 990kg ADVANTAGES - Auto-reverse - German-made - Unpainted - Similar to WEIMA WL4 - Clamping drawer - Very good condition - Used wood chipper Net price: 48900 PLN Dsdszxg Snspfx Aiiecp Net price: 11372 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m Dcedpfx Aie Aavnfjiop The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: excellent (used), Catalog number 8012 TECHNICAL DATA - inlet width 420mm - inlet height 270mm - shaft width 410mm - shaft diameter 450mm - number of blades: 2 rows, 7 pieces each - screen dimensions 50x70mm - toothed pull shaft (bottom) - lower shaft motor 1.1kW - toothed pull shaft (top) - upper shaft motor 1.1kW - main motor 45kW - forward/reverse feed - automatic reversing - additional screen 10x10mm - extraction nozzle diameter 330mm - vibrating screen 1.1kW, 3300x400mm - overall dimensions of the vibrating screen 3340x630x620mm - machine dimensions (length/width/height) 2310x1040x1000mm - weight approximately 1800kg ADVANTAGES - German production - automatic reversing (with adjustable settings) - with 3300mm vibrating screen - DTR documentation – used shredder, good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations) Dcsdpfxezx Sgks Aiijp

Year of construction: 2019, condition: new, Aluminum flat belt conveyor without supporting structure 3000 mm flat Dimensions: approx. 3000 x 500 x 105 mm Dcodpfx Aioff Hf Dsiep Aluminum construction: Belt width including wave edge 500 mm Belt color: green, 2-ply, particularly stable in the transverse direction, endlessly welded with a stepped joint * antistatic due to threads in the fabric of the running side Drive: Motor approx. 0.25 kW, speed 0.3 m/sec. * controllable with a frequency inverter Connection 220/400 V, 50 Hz, protection class IP54 Drive, motor control optional

Condition: used, power: 30 kW (40.79 HP), Wood chipper Manufacturer: Fransson Model: TNM – 45 Electric motor: 30kW Dodpfxezha S Tj Aiijcp Drive motors: 2×0.75 kW Complete with vibrating conveyor: length – 8.5 m Electrical cabinet

Condition: excellent (used), Catalog number: 8140 TECHNICAL DATA - inlet width: 350mm - inlet height: 120mm - shaft width: 370mm - shaft diameter: 420mm - blade length: 350mm - number of blades: 3 pcs - screen: 40x40mm - toothed drag shaft (bottom) - lower shaft motor: 1.5kW - toothed drag shaft (top) - upper shaft motor: 1.5kW - main motor: 37kW - auto-reverse - capacity: approximately 12 m3/h - conveyor belt: 3000x350mm - conveyor belt dimensions: 3150x610x1230mm - length/width/height - dimensions: 2200x1000x1800mm - weight: approximately 1500kg ADVANTAGES - manufactured in Poland - 3000mm conveyor belt – auto-reverse - used machine – very good condition Net price: 62900 PLN Net price: 14628 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations) Dcedpfx Ais Ahm Ifoiop

Condition: excellent (used), CATALOGUE NUMBER 7613 Technical data: - inlet width 650mm - inlet height 300mm - shaft width 660mm - blade length 660mm - number of blades 2 pcs - screen dimensions 90x100mm - 2 toothed pull shafts from below - lower shaft motor 3kW - 2 toothed pull shafts from above - upper shaft motor 3kW - belt conveyor - belt conveyor length 2700mm - belt conveyor width 630mm - main motor 75kW - auto-reverse - reverse gear - overall dimensions (L/W/H) 5350x1300x1300mm - weight 4200kg ADVANTAGES – Made in Italy – Auto-reverse (adjustable) Dcodpfx Ae Af In Usiiop – Reverse gear – Used shredder, very good condition Net price: 149900 PLN Net price: 34860 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Dedsyi H Ryopfx Aiiocp Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg

Condition: used, mileage: 36,686 km, power: 460 kW (625.43 HP), axle configuration: 8x8, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, total width: 25,500 mm, total height: 40,000 mm, Equipment: ABS, EBS, air conditioning, = Additional options and accessories = - Braking system = Notes = Mr. Seidel will be happy to assist you with any inquiries regarding the vehicle (tel. ). Mercedes-Benz Arocs TUROX Eschlböck Biber 92 Body: Eschlböck Biber 92 Crane: Epsilon S110F104 Wheel arrangement: 8x8-4 Operating hours of the wood chipper: only 1,512 hours! Many pictures and videos available. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Dcodpfx Asyfpx Esiiep Further information can be found on our website. ... Errors, changes and prior sale reserved!!! Particle filter Cab: For local transport = Further information = Year of manufacture: 2016 Engine displacement: 15,569 cc GVWR: 36,000 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), CATALOGUE NUMBER: 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm Dcodo Aggb Hepfx Aiiop - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed drive rollers, top and bottom, 2 x 2.2kW - Electric automatic reversing system - Reverse gear - Belt conveyor - Conveyor length: 5100mm - Belt width: 400mm - Main motor: 30kW - Shredder dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight: approximately 3000kg - With belt conveyor - Electric automatic reversing system (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 68900 PLN Net price: 16023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Inlet of the loading hopper: 800x1000mm - Working width of the rotor: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Dimensions of knives: 30x30mm - Screen: 0.8x10mm - Pressing drawer - Electric auto-reverse - Discharge augers: 2 x 1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg - Made in Germany - Auto-reverse - Pressing drawer - Unpainted - Very good condition - Used shredder Dcedpfoztauljx Aiisp Net price: 59,900 PLN Net price: 13,930 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Dcedped Dy S Rjfx Aiiop Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Year of construction: 2003, condition: used, wood chip sieve Dodpfxjx Ta Nfj Aiiecp

Condition: like new (used), Year of construction: 2005, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: electric, LBH RHZM 750 wood shedder. Dcedpfxj Ah Dque Aiiop The machine is in excellent condition! As shown in the photos. Can be tested on-site. We will assist with loading; transport is the buyer's responsibility.

Condition: ready for operation (used), Drum chipper for production of cellulose chips or fuel chips. The chipper is feeded from a vibro conveyor and feeding bin. Dcsdpfoyh Umwex Aiiop Included is also Bruks chip screen type Bruks BS3. Electrical motor 75 kW. Capacity up to 60 m3 ready made chips per hour. Infeed opening , width 540 mm, height 300 mm

Condition: excellent (used), Catalog number: 7411 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Blade length: 430mm - Number of blades: 2 pcs - Screen dimensions: 60x60mm - 2 toothed pull shafts from below - Lower shaft motor: 1.5kW - Toothed pull shaft from above - Upper shaft motor: 1.5kW - Belt conveyor - Length of feed belt: 2250mm - Width of feed belt: 400mm - Main motor: 30kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000mm - Weight: 1800kg - Made in Germany - Auto-reverse (adjustable) - Used shredder, very good condition Net price: 69900 PLN Dcjdpfx Aoztq T Esiisp Net price: 16256 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7032 TECHNICAL DATA - Hopper inlet: 1050x610mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 580mm Dsdsztq Rwjpfx Aiiocp - Main engine: 18.5kW - Pump engine: 0.75kW - Number of knives: 14 pcs - Knife dimensions: 30x30mm - Screen: 15mm x 20mm - Presser drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – German production – Auto-reverse – Presser drawer – Very good condition – Used wood chipper Net price: 47,900 PLN Net price: 11,140 EUR Net price converted according to an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: like new (used), Manufacturer / Model: JENSEN A530 L Country of manufacture: Germany (Handmade in Germany) Year of manufacture: 2021 Mileage: 27.7 operating hours (factory condition!) Engine: KUBOTA diesel engine Type of chipper: Disc chipper (blades in perfect condition) Maximum material diameter: approx. 130 - 150 mm (depending on the wood's hardness) Infeed system: 2 horizontal hydraulic rollers (smooth speed adjustment) Djdpfx Ajzlu Rfsiijcp Discharge chute: Rotatable within a range of 270° with an adjustable deflector No-Stress system: Yes (automatically controls the operation of the rollers depending on the engine speed)

Condition: used, functionality: fully functional, overall weight: 1,700 kg, fuel type: electric, - Swiss made TECHNICAL SPECIFICATIONS: Dcedpfx Aie Aa Nyujiep - feed hopper opening: 730 x 860 mm - rotor diameter: 300 mm - rotor length: 730 mm - main motor power: 15 kW - number of knives: 19 pcs - rotating cutting knives: 40 x 60 mm - screen: φ 25 and 20 mm - AUTO REVERSE - HYDRAULIC CHUTE - height of the compression chute: 150 mm - dimensions (L/W/H): 160 x 160 x 160 cm - weight: ~ 1700 kg

Condition: ready for operation (used), Year of construction: 1995, A robust Mawera wood shredder including feed floor is offered. Throughput capacity: approx. 500kg/h, feed width: 844mm, drive power: 22kW, number of blades: 30, blade diameter: 64mm, motor speed: 1480rpm, control system: PLC, weight: approx. 2100kg, dimensions: approx. 2020mm/1650mm/1250mm. Inspection by appointment possible. Dcjdpfozmymbex Aiijp

Condition: used, Year of construction: 2001, functionality: fully functional, overall weight: 1,600 kg, fuel type: electric, - German-made - Year of production: 2001 – DTR documentation – Autoreverse – Pressing drawer TECHNICAL PARAMETERS: – Feed opening size (width/length): 820 x 1420 mm – Rotor diameter: 300 mm – Rotor length: 820 mm Dsdpfjy Na N Dox Aiiecp – Total power: 23 kW – Power supply: 400 V, 50 Hz – Rotating knives: 35 x 35 mm – Number of knives: 40 pcs – Screen: Ø10 and 12 mm – HYDRAULIC DRAWER – Pressing drawer height: 320 mm – Outlet diameter: Ø200 mm – Dimensions (L/W/H): 240 / 150 / 175 cm – Weight: ~1600 kg

Condition: excellent (used), CATALOGUE NUMBER 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm Dcodpfxozruhqs Aiiep - blade length 530mm - number of blades 2 pcs - screen dimensions 55x50mm - 2 geared pull shafts from below - motor for lower shafts approx. 3kW - geared pull shaft from above - motor for upper shaft 1.5kW - feeder belt length 4600mm - feeder belt width 400mm - main motor 55kW - auto-reverse - feeder dimensions (L/W/H) 4630x620x760mm - machine dimensions (L/W/H) 2510x1700x1200mm - weight approx. 3500kg - German production - auto-reverse (adjustable) - used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Dcsdpfjz Ikxzjx Aiiep Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 1995, machine/vehicle number: IDC000049, Vecoplan VZ 60/34 V shredder For shredding wood waste and other products. Inlet width 600 mm; Inlet height 340 mm; Number of cutting plates 28; Cutting inserts 40 x 40 mm; Rotor speed approx. 450 rpm; Chip or shredded product size approx. 30 mm; Capacity 2 m3/hour; Input rotor motor power 11 kW Dodpfx Ajrdykvsiiscp