Used Wood Chip Crusher for sale (10,884)

Year of construction: 2003, condition: used, wood chip sieve Ljdpfxex Ta Nfe Anujac

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers - Manufacturer: Passimo OY Lodpstmtf Rsfx Anusac - Screen area: 15 m2 - After renovation.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Lasdpfewp Rqfsx Anuec Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm rotor width 450 mm Lsdpjlx Ndlefx Anujac

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Ljdpfx Anjvvmvfeujac

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Lajdpein Ewlefx Anuec Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Ledpfx Anjw Uf S Hjuoac

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Lodpfx Aneqmi Irousac Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer Laedpfx Ansy Nzxgsujc - Electric auto-reverse - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg Lsdpfx Asy Nz Arjnueac ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: used, Catalogue No.: 7536 – German-made – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Ledpfx Asy N Raaenuoac Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Feed opening height: 200 mm Net price: 30,000 PLN Net price: 7,140 EUR (at 4.2 EUR rate) (Prices may change with significant fluctuations)

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW Ledey Rr Rcepfx Anueac - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse Lodpfx Ajy R A Ncenujac - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition Lajdoy Nyx Espfx Anujc – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6955 TECHNICAL DATA - Feed hopper inlet (L x W): 1070 x 710 mm Laedpfxozfpzre Anusc - Discharge outlet for shredded wood: Ø 200 mm - Rotor working width: 700 mm - Main motor: 18.5 kW - Pump motor: 1.5 kW - Number of knives: 21 pcs - Knife size: 35 x 35 mm - Screen: 50 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1700 x 1300 x 1640 mm - Weight: 1780 kg FEATURES – German-made – Auto-reverse – Pressure drawer – Very good condition – Used shredder Net price: 62,900 PLN Net price: 14,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm - Rotor working width 1020mm - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Similar to WEIMA WL 10 – German made Laedezfpy Ujpfx Anujc – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Lasdpozdz Rcjfx Anujc Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), functionality: fully functional, DRUM CHIPPER BRUKS 602 CS Laodpozdpb Nefx Anuoc opening size: 540 x 300 mm Drum diameter 600 mm Motor 26 kwh Capacity 20 m3 of chips/hour. Good condition

Condition: like new (used), WEIMA WL 15 crusher chipper crusher – technical documentation – year of production 1992 TECHNICAL PARAMETERS : main engine power 37 kW motor power from the hydraulic pump 1.5 KW total power: 39.25 kW AUTOMATIC REVERSING HYDRAULIC DRAWER shaft rotation 90 U/min rotor length 1500 mm Knock multi-knife shaft 36 Ljdpjfm Tp Djfx Anuoac knife dimensions: 35 x 35 mm sieve fi 20 / 15 mm height of the pressure drawer 180 mm chip collection viper rotor diameter 245 mm hopper size 1500 mm x 1500 mm drawer length 1000 mm dimensions (length/width/height) 270 x 240 x 280 cm weight 4000 kg

Condition: excellent (used), Catalogue number 7260 TECHNICAL SPECIFICATIONS - Loading hopper inlet: 870x730 mm Ledpfxjzcd H Eo Anueac - Rotor working width: 710 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 19 pcs - Knife dimensions: 75x40 mm - Screen: 15 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: Ø 250 mm - Dimensions (L/W/H): 2350x1400x1670 mm - Weight: 1360 kg ADVANTAGES – Pressing drawer – Very good condition – Used wood chipper Net price: 32,900 PLN Net price: 7,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm Lajdpfezccdpex Anusc - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations) Laedpfxjy Nytie Anuec

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900mm Infeed height: 300mm Shaft width: 1030mm Shaft diameter: 700mm Knife length: 1030mm Number of knives: 3 pcs Screen dimensions: 70x70mm Bottom: 2 toothed feed rollers Bottom roller motor: 7.5kW Top: 2 toothed feed rollers Top roller motor: 7.5kW Belt conveyor Redler chain conveyor 5600mm + 10600mm 2.2kW Infeed belt width: 800mm Main motor: 90kW Reverse operation Total machine dimensions (L/W/H): 3300x3100x1700mm Shredder base dimensions: 3300x2080x1940mm Feeder / redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Base dimensions for infeed belt: 5100x1300x2520mm Total weight approx.: 16000kg Lodezcby Nepfx Anueac ADVANTAGES – German-made – Redler chain conveyor equipped with scrapers – Reverse operation – DTR technical documentation – Used shredder in very good condition Net price: 219,900 PLN Net price: EUR 52,350 (at EUR 4.2 exchange rate) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7026 Laodpfxezcbyve Anuoc TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function Lajdezbavaopfx Anuec - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)