Used Wire Cut Edm Machine for sale (67,921)

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM machine – in top condition, both technically and visually. The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric survey, alignment, and additional check were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine is also in very good visual condition. The generator and control unit were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Dwedpfxj Afg H Ns Alfod Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideally suited for reliable production operations. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2014 Control system EAGLE Powertec PC/NC 3060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld control unit Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disk changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 09.11.

Condition: used, Year of construction: 2023, Manufacturer: Plasmatreat GmbH, Steinhagen, Made in Germany Type: PTU1212 Serial no.: 10715 Commission no.: 262904 Year of manufacture: CW 19/2023 Power supply: 3~ / 400 V / 230 V AC / N / PE, 50–60 Hz Imax / fuse: 12 A / 3 × 16 A Icw: 0.64 kA Marking: CE Equipment (as per photos and HMI) KUKA articulated robot for part handling within the cell. Plasma nozzle system PFW10PAD (designation as per HMI). PlasmaPlus® unit (HMI function “PPlus”) with vaporizer, gravimetric precursor dosing, MFC/GFC gas control for process and carrier gas, and precursor reservoir. Plasmatreat touch HMI on a support arm, with recipe management, set/actual and tolerance monitoring of all process parameters, emergency stop and control buttons. Fully enclosed safety housing with glazed doors, signal light, main switch, and extraction connection. Mobile control unit with push buttons. TBH extraction and filter unit, connected to the cell via a flexible hose. Please note: * Sold in the name and on behalf of BorgWarner Turbo Systems. Dedpfx Ao Air S Eelfewd * Location: Kirchheimbolanden, Germany * Not included: workpieces, work tables and part carriers, pedestal fan * The machine is currently not in production and has been stored.

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Dedpj Ahgrtofx Alfswd Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm Dwjdozizkyopfx Alfsd ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2006, operating hours: 6 h, machine/vehicle number: E5694, workpiece weight (max.): 800 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 320 mm, total height: 2,330 mm, total length: 2,100 mm, total width: 2,675 mm, table width: 600 mm, overall weight: 5,000 kg, table length: 450 mm, feed rate X-axis: 5 m/min, input voltage: 200 V, quill diameter: 125 mm, cutting speed: 5,000 mm/min, travel speed (max.): 5,000 mm/min, Equipment: documentation/manual, Machining Time: 5:36 X/Y/Z Axis Movements 450 mm × 300 mm × 320 mm Longitudinal (X), Cross (Y), Vertical (Z) Maximum Workpiece Weight 800 kg Work Table Dimensions (W × D) 600 mm × 450 mm Work Tank Internal Dimensions (W × D × H) 800 mm × 550 mm × 350 mm Electrode Bracket - Table Distance Between 230 mm and 550 mm Maximum Electrode Weight 50 kg Simultaneously Controlled Axes 3 Axes (X, Y, Z) Minimum Input Increment 0.001 mm (1 µm) Continuous Feed Rate 5,000 mm/min Dwedpfo Ahxx Sjx Alfsd Weight 5000 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 20,000 h, laser source model: ROFIN DC 020, laser power: 2,000 W, working length: 6,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Processing length: min. 3,200 mm Processing length: max. 6,500 mm Round tube diameter: min. 12 mm Round tube diameter: max. 120 mm Square tube dimensions: min. 12 × 12 mm Square tube dimensions: max. 100 × 100 mm Rectangular and oval tube dimensions: min. 10 × 12 mm Rectangular and oval tube dimensions: max. 120 × 70 mm Laser power: max. 2 kW MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 4,500 mm Load capacity of the bundle loader: 4,000 kg Number of digitally controlled axes: 6 Laser source: ROFIN DC 020 Operating hours: 20,000 h Djdpfxe Air Ide Alfewd EQUIPMENT Automatic bundle loading system Unloading system ROFIN DC 020 laser source Cooling unit (chiller) Extraction system LT120 Optical weld seam tracking system LT120 Integrated micro-dosing system

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm Dwsdpfjytkdrjx Alfsd RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: excellent (used), Year of construction: 2020, operating hours: 13,800 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Dodpfx Alexnx Itefowd Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm (including KIT 70) Wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for comfortable setup Including AGIESETUP 3D Including automatic wire changer AWC (using 2 wire spools) VISION 5 control Dwedpfxs Ah D U As Alfsd AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has already been completely cleaned, overhauled, and thoroughly tested. You will receive a 6-month warranty on the machine. We would also be happy to perform an individual test for you on the CUT 3000. Includes operator training at Techma on your overhauled machine. We would also like to offer you the following options: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: good (used), functionality: fully functional, Year of construction: 2011, Trumpf TruLaser 5030 L16 in good condition for sale. Optional: available with Liftmaster. The machine is being sold due to a plant upgrade. Working area: 3,000 x 1,500 mm Laser source: CO₂ laser Djdpfx Aozlttlolfswd Laser power: 5 kW Year of manufacture: 2011 Control system: Siemens Sinumerik Max. sheet metal format: 3,000 x 1,500 mm Processable materials: Steel Stainless steel Aluminum Immediately available Machine already disassembled

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Dodew Ucyuepfx Alfswd Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: S568, Metral vertical glass cutting machine, model with straight cut, manufactured in 2000. Dsdpfx Alo Aitpzjfswd The machine is in very good condition and is fully operational. The machine is available for immediate delivery.

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Dwjdsibq Itopfx Alfjd Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, Long arm Wire Stitching Machine Dwjdj Aikklepfx Alfod Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781 Serial-No. 8170126 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Dedpfx Alom Amf Dofewd Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2016 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Dodps Aaz R Esfx Alfswd Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility after the order is received. You will receive a 6-month warranty on all machine parts. We would also be happy to offer commissioning and training.

Year of construction: 1993, condition: used, Automatic cut and strip machine designed to process various types of wire. Djdpfxj Ah Sk Ds Alfowd

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Dwodpfxoy R Dtce Alfod

Condition: used, Year of construction: 2020, operating hours: 14,167 h, functionality: fully functional, Lasertube machine ADIGE LTB.20. Base module. Machine integration for FIBER laser source with 3D head, TubeCutter, and Active Focus. Automatic bundle loader for tubes with 2500-6500 mm length. Bundle loader FIBER safety covers. Installation of the bundle loader on the front side. Pushing device for tubes on standard packs for the bundle loader. Automatic loader for single bar with 2500-6500 mm length. Front installation side. Single bar loader FIBER safety covers. Installation of the automatic loader for single bar. Loading portal main module. 6500 mm length loading portal module with four carrying arms. Loading portal FIBER safety covers. Dodps Aikylofx Alfowd Discharge module for 4500 mm cut tube length. Discharge module FIBER safety covers. 6500 mm length complementary discharge module for the front side and 3400 mm length for the rear side. Complementary discharge module FIBER safety covers. In-line discharge system. 2000 mm module extension for the in-line discharge system. Discharge system FIBER integration. Parts collecting table, 3400 mm base module. Base module parts collecting table on the machine's rear side. Machine integration for IPG fiber laser source. IPG YLS-4000 fiber laser source. Chiller with closed circuit for the laser source. Fume extractor (D). Optical device for weld seam identification and orientation. Active piercing: drilling process control and optimization device. Active Scan device. Active Weld. Two webcams, for the rear loader and for the cutting area.

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Djdpsf Ncadefx Alfswd Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Machine weight: approx. 15,000 kg Machine No.: A0320A0086 The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Dwedpfxo Adzppe Alfed Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Djdpfx Ajx Hghuolfswd incl. chiller Automatic wire threading Water bath

Condition: good (used), Year of construction: 1999, functionality: fully functional, FOR SALE: FANUC ROBOCUT α-1iA Wire EDM Machine Specifications and technical capabilities (Manufacturer’s plate): • Model: ROBOCUT α-1iA (Type A04B-0312-B002/E5) • Year of manufacture: October 1999 (Serial number: P99X11330) • Numerical Control: FANUC Series 18i-W • Axis travels (Stroke): X = 520 mm | Y = 370 mm | Z = 410 mm • Taper axes: U = 120 mm | V = 120 mm • Maximum workpiece weight: 1,000 kg (1 tonne) • Power supply: 200/220V (Three-phase, 50/60 Hz) – Required power: 13 kVA • Machine weight: 2,700 kg (2.7 tonnes) Included equipment: • Original control panel with remote screen and keyboard • Work tank with full protective enclosure • Automatic wire threading system (roller guide system) • Remote manual control unit Dodpe Af Auvofx Alfswd Condition: • Used machine, fully operational, sold as is.

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm Dwodpfx Asm Uyuxelfod z 220 mm Wear-free tubular direct drive Water bath incl. cooler Automatic wire threading

Condition: like new (used), Year of construction: 2022, operating hours: 287 h, functionality: fully functional, type of input current: three-phase, total width: 265 mm, total length: 415 mm, input voltage: 400 V, input current: 25 A, feed length X-axis: 1,800 mm, feed length Y-axis: 3,000 mm, working width: 1,800 mm, total height: 142 mm, cutting width (max.): 1,800 mm, cutting height (max.): 300 mm, front table length: 2,000 mm, hole diameter: 2 mm, Orox Tailor T 300 Automatic Cutting Machine for Sale – Complete, Turnkey Solution Dodpfx Asya Hhtelfjwd We are offering for sale a 2022 Orox Tailor T 300 automatic cutting machine in excellent condition, featuring extremely low operating hours. The equipment was used in a family-owned business where its capacity significantly exceeded actual production requirements; therefore, it is being offered for sale. Key advantages of the system: • Complete, integrated cutting solution • High-value (~€10,000) professional software package • Built-in photo system for recording fabric lays • Exceptional support for processing patterned materials • Detection of material defects and precise marker alignment • Supports digitization of cutting patterns • Immediate production start possible without additional investment Package includes: • Orox Tailor T 300 automatic cutting machine • Grafis pattern and nesting optimization software • Integrated photo system • Dedicated computers • 2-meter preparation/cutting table • Compressor and full accessories kit Upon request, an independent technical inspection and assistance with transport and installation can be provided. Price: HUF 35,000,000 + VAT Serious enquiries only – please contact us for further information.