Used Wire Bending Machines for sale (65,810)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 3ROLL3000X50MM, roller (bottom) diameter: 460 mm, roller (top) diameter: 500 mm, roller diameter: 500 mm, roller length: 3,100 mm, working width: 3,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 26,000 kg, type of input current: three-phase, working length: 3,000 mm, Equipment: documentation/manual, emergency stop, model 3 roll planetary with pre-pinch 3000x50 mm upper roll size 500 mm CAPACITY plate width 3000 mm plate thickness 50 mm prebending 36 mm diameter rolling 2200 mm Tsdjvr S S Rjpfx Af Tof performance on plate quality 355 MPa ---- reducing plate width 2000 mm capacity thickness 55 mm --- minimum diameter of rolling 600 mm all the accessories installed hardened rolls conical attachment digital position readout power installed 50 Hp weight of the machine 26Ton

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical components completely renewed. TECHNICAL DETAILS Pipe diameter: 16 - 60 mm Tedpowlpt Djfx Af Tef Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Pipe length: 1,500 mm Bending angle: max. 180° + springback Pipe length: 400 - 1,500 mm Pipe outer diameter: 28 mm - 60 mm Material parameters Tensile strength of stainless steel: max. 750 N/mm² Tensile strength of mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel movements Bending direction: left Bending speed (forward travel): max. 22.0 rpm (infinitely adjustable) Bending speed (reverse travel): constant 22.0 1/min Twisting angle: max. 360° Twisting speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Stop time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic filling volume: 340 l Control system Bending levels: up to 6 (CNC-programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operating and control panel EQUIPMENT - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec pipe magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction - Various bending tools for Ø 60 mm pipe - Various auxiliary tools - Cooling unit for control cabinet - Foot control (2-way) - Schwarze-Robitec control panel - Cooling unit for control cabinet Rittal type SK 3361100 Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.

Condition: new, Ercolina TB 050 T mandrel-less bending machine Simple control for perfect bends We are ERCOLINA dealers - PLEASE SEND US YOUR INQUIRY - or would you like a telephone consultation ? Technical data: Three-phase mandrel-less bending machine up to 60 mm Control: Soft touch control panel in 8 languages Bending radii: R10 to R300 (min. R= 2xD) Max. bending speed: 1,25 / 2,5 rpm Dimensions (W x H x D): 595 x 900 x 363 mm Mobile due to mobile device Weight: 130 kg Todpfx Aod Tbpqjf Tef Output: Hard copper and aluminum : 64 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 3 mm Solid material : 35 mm SCOPE OF DELIVERY: TB050T Standard accessories (a. o. foot switch, instruction manual, 2 hexagon)

Condition: used, functionality: fully functional, Year of construction: 2022, roller (bottom) diameter: 210 mm, roller (top) diameter: 230 mm, side roll diameter: 190 mm, sheet thickness steel (max.): 10 mm, overall weight: 5,560 kg, total length: 4,642 mm, total width: 1,390 mm, total height: 1,300 mm, power: 7.5 kW (10.20 HP), working length: 2,600 mm, Overview: Akyapak's AHS series, AHS 25/08-10 model, which is among the 4-cylinder hydraulic cylinder bending machines, has the capacity to bend sheet thicknesses from 2 mm to 200 mm and sheet widths from 500 mm to 12,000 mm with high quality and precision. Technical Specifications: Todpfx Aov Hcviof Tof Bending Capacity: Sheet thicknesses from 2 mm to 200 mm and sheet widths from 500 mm to 12,000 mm. Body Structure: Welded steel (St-52) construction. Roll Shaft and Bearings: Manufactured from high quality materials and resistant to high bending moment. Drive System: Upper and lower rolls are driven independently by hydraulic motor and planetary reducer. Side rolls are idle. Control System: NC and CNC options are available. Energy Efficiency: Provides optimized energy efficiency with the butterfly (action arm) system. Features: Robust Body: Long-lasting and durable structure with welded steel construction. Advanced Software: Advanced software features that facilitate large-scale production. Easy Use: Hydraulically opened and closed upper roll cover and cone opening/closing operations from the control panel. Certificates: Production quality registered with CE, ISO 9001-2008, TSEK and TURQUM.

Condition: ready for operation (used), Technical characteristics 4 hot wire bending heads useful length 2000 mm PMMA and methacrylate folding with a thickness of 1 mm to 20 mm adjustment of the gap between the wires 3 wires above / below per group Power and Motors Overall dimensions Todpjtv Tipsfx Af Tef

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 495 mm, roller (top) diameter: 515 mm, side roll diameter: 355 mm, roller diameter: 495 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 60 mm, overall weight: 29,200 kg, total length: 5,770 mm, total width: 2,390 mm, total height: 2,760 mm, power: 55 kW (74.78 HP), Equipment: documentation/manual, Interchable top roller 410mm Tsdjv Nhkwjpfx Af Tsf

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 08063406 3441, roller (bottom) diameter: 265 mm, roller (top) diameter: 285 mm, roller length: 3,100 mm, sheet thickness steel (max.): 15 mm, overall weight: 8,000 kg, total length: 5,300 mm, total width: 1,200 mm, total height: 1,700 mm, power: 14.71 kW (20.00 HP), type of input current: three-phase, Equipment: emergency stop, Roll bender for sale from a private individual. Todpfx Afevl H Rbs Tsf Rolling capacity 5xD = 15 Prebend capacity 5xD = 12 Prebend capacity 1,3xD = 9

Year of construction: 1985, condition: good (used), Beckslide travel; 240 mm Quill travel; 100 mm Tedpfedy Dw Esx Af Tef Table dimensione; 350x230 mm Longitudinal travel (x); 200mm Transverse travel (y); 120 mm Table load maximum; 100 kg Work tank dimensions; 520x350 mm Dielectric reservcircapacity; 68 l Hydraulic tank capacity; 5,6 l Dielectric pump flow 140l/min Weigt of generator P25 -125 kg Power requirements; Machine 1kVA Generator 2,2kVA Hydraulique pump pressure; 20 bars Weight with storage tank; 460 kg

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Tedpjwmdw Hjfx Af Tsf Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Wire grooves 8/12/15mm Price excluding VAT

Condition: new, This wire and strip bending machine, equipped with 8 Yaskawa motors and Windows PC numerical control, is perfect for manufacturing large parts in 2D or 3D. Todpfxjpiucxo Af Tef The advantages of this equipment include low tooling costs, easy programming, low maintenance costs, reliability and dimensional repeatability of the parts produced.

Condition: used, Year of construction: 2006, MODEL MCB 3045 4-ROLL CNC DOUBLE INITIAL PINCH HYDRAULIC PLATE ROLL. Working length 3100 mm Max thickness 40 mm Mechanical/Hydraulic Hydraulic Upper roll Ø 450 mm Lower/lateral rolls Ø 410 mm Tsdpfx Afowdn D So Tof Engine Power 29.8 kW Prebending ----- Dimensions 4950.0 × 2450.0 × 2600.0 Weight 29000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 172, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Weight: 1 t Motor power: 6.5 kW Further information according to the manufacturer - without guarantee Front roller spacing continuously adjustable: 200 - 1000 mm Number of driven rollers: 3 Drive type: Electric motors Maximum speed: 22 rpm Roller height: 300 mm Todpfx Afjv Nhime Tef Torque: 1,600 Nm Works on both sides: rolling at the front, bending at the rear Length: 1.6 m Width: 1.3 m Height: 1.4 m Weight: 1.2 t

Condition: excellent (used), Year of construction: 2014, roller (bottom) diameter: 195 mm, roller (top) diameter: 215 mm, working width: 2,050 mm, overall weight: 3,000 kg, total length: 3,700 mm, total width: 1,000 mm, total height: 1,100 mm, power: 7.35 kW (9.99 HP), type of input current: three-phase, Equipment: emergency stop, Rolling capacity 5xD=13 mm Prebend capacity 5xD=9 mm Tedpfx Afovl Iaqs Tsf Prebend capacity 1,3xD=7 mm

Year of construction: 1988, condition: good (used), AGIE AGIECUT 100 type AC100/87 serie 122 Machine tool AGIECUT 100 Generator - AGIEPLUS-MM Machine control - AGIEMATIC -C Dielectric aggregate – DA-15/AF Working table; length 560 mm , width 445 mm Max. dimensions of work piece; length 810 mm, width 580 mm, height 250 mm Table load max; 200 kg Height of work support over ground; 800 mm Longitudinal traverse (X-axis); 300 mm Cross traverse (Y-axis); 200 mm Rapid traverse; 30 mm/min Tsdpfxjdy Dvxs Af Tef Diameter of electrode wire; from 0.03 mm up to 0.30 mm Total power required; 15,7 kVA Weight total installation approx.; 2700 kg Overall dimensions machine; Length 1700 mm Width 1550 mm Height 2130 mm

Condition: not inspected (used), functionality: fully functional, Bending machine for profile "CU" wire Tjdpfx Afeu Dl E Es Tsf

Condition: ready for operation (used), empty load weight: 340 kg, total length: 1,430 mm, total width: 560 mm, total height: 980 mm, Can work in horizontal and vertical positions 3 driven rolls digital readout hydraulic stroke of upper roll: 124 mm with tooling for tubedia 28 44 mm Read-out: digital readout Tsdpfexlli Eox Af Tjf Dia rolls: 165 mm Dia of die mandrel: 40 mm Rotationspeed: 10 rpm Motorpower: 1,85 kW

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, JUKI KE 3020, 3010, 3010 production line or standalone machines with electric feeders. Tsdpfx Aju Hrc Asf Tof KE-3010XL Year of manufacture: 2014 Longboard option Vision camera KE-3010AL Longboard option Year of manufacture: 2017 KE-3020R 2016 Longboard option Vision / Fine Pitch camera Including nozzles and accessories Including electric feeders (EF) 93 x 8mmS 26 x 12mm 21 x 16mm 9 x 24mm 5 x 32mm 2 x 44mm 1 x 56mm 1 x 72mm 1 x DTS 1 x tray holder 10 x feeder trolley Very good condition with maintenance history

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 3 h, overall weight: 7,000 kg, empty load weight: 3,500 kg, maximum load weight: 3,500 kg, color: white, Equipment: documentation/manual, rubber tracks, Very little used machine. Tedpfx Afsw Hggqo Tjf

Condition: new, Year of construction: 2024, We offer very flexible CNC Pallet nailing machines designed for production most kinds of pallets Machine available in 2 versions 1. Palletmax it is double table CNC Nailing Machine 2. Palletstar it is delta-triple table CNC Nailing Machine with stacking robot. Also for pallets 2600mm length. - Easy and quick change system and training for new pallet. - Standard and adjustable templates. - Easy maintenance and low costs - High capacity . Tedpfxetk Dgho Af Tef - Short production period.

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Tedpfxsxwux To Af Tjf Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) Tedpfx Afsmk S Slj Tsf This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Todpfxjxtwddj Af Tsf

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Todpfx Aou Ixt Djf Tjf

Condition: used, axle configuration: 3 axles, first registration: 07/2020, total length: 11,800 mm, total width: 2,510 mm, wheelbase: 8,000 mm, color: white, Year of construction: 2020, General Information Odometer Reading: 3,454 km Axle Configuration Rear Axle 1: Max. Axle Load: 9,000 kg Rear Axle 2: Max. Axle Load: 9,000 kg; Steerable Rear Axle 3: Max. Axle Load: 9,000 kg; Steerable Weights Unladen Weight: 13,970 kg Payload: 25,030 kg Gross Vehicle Weight (GVW): 39,000 kg Functionality Pump: Yes High-Pressure Pump: Yes Tsdsw I T Ddopfx Af Tsf Water Installation: Yes Financial Information Price: On request Further Information Please contact John de Koning or Mark de Koning for further information.

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Tedpfxsu Ixkps Af Tof