Used Wiping Machine for sale (91,582)

Condition: used, Year of construction: 1988, x-travel 870 mm y-travel 370 mm z-travel 400 mm Dkodpsxlkw Usfx Aduju table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Novapac cup filling and sealing machine, type: RM 150, machine number: 25 178, year of construction: 2005, 400 V, 50 Hz, denester: 85 mm x 85 mm, dyes: (2x) 72 mm x 72 mm, plastic belt, belt width: (2x) 100 mm, total dimensions: 2400 mm x 2350 mm x 2370 mm. S/s switch cabinet, dimensions: 1000 mm x 400 mm x 2150 mm, s/s control panel, dimensions: 800 mm x 350 mm x 800 mm. Dodsxl Tx Uspfx Adueku

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation Dksdpfeww E Nrex Aduou - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: excellent (used), Year of construction: 2011, Series 19-No.6 with chain loader, 5-position grinding wheel changer Dkjdpoxl Txnsfx Adueu

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 85 m/min, feed rate Y-axis: 85 m/min, feed rate Z-axis: 40 m/min, table length: 3,500 mm, table width: 2,000 mm, spindle speed (max.): 28,000 rpm, table height: 250 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, rapid traverse Z-axis: 40 m/min, table load: 5,000 kg, torque: 70 Nm, rotational speed (max.): 28,000 rpm, overall weight: 22,000 kg, Equipment: rotational speed infinitely variable, Year of manufacture: 2015 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,000 mm A-axis: +/- 115° C-axis: +/- 270° Control system: SIEMENS SINUMERIK 840D SL Clamping table, subfloor Length x Width x Height: approx. 3,500 x 2,000 x 250 mm (cast iron) Table load: max. 5,000 kg/m² T-slots: 22H12 T-slot spacing: 250 mm Milling spindle Spindle power S1 / S6: 40 / 54 kW Spindle speed: max. 28,000 rpm Tool holder: HSK 63A Torque S1 / S6: 51 / 70 Nm Linear axis drives Feed rate X and Y axes: up to 85 m/min Feed rate Z axis: up to 40 m/min Dkjdpfjxl Tl Uox Aduju Connection data Connected load: approx. 55 kW Line protection: 45 A Dimensions, weights Machine footprint: approx. 6,650 x 6,200 x 5,000 mm Total weight: 21,000 kg Description: Additional equipment - 2x chip conveyors - Protective bellows with compressed air sealing - 40 bar ICS coolant supply with belt filter system - Minimum quantity lubrication - 30-position tool changer Optional - Renishaw RMP60 Condition of the machine Fully functional condition, regularly serviced by the manufacturer. Immediately available and still connected to power. Special note The machine requires a special foundation so that the table and chip conveyors can be recessed into the floor.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min Dsdpfxsxl Tcgo Aduoku rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: good (used), Internal item no.: 25079 No VAT can be stated, as margin scheme applies. Cylindrical grinding machine Overbeck 250R Dedpfjxl S Tdjx Adueku + Operating manual + Three-jaw chuck (workpiece clamping) + Collet set (workpiece clamping) Technical specifications: Max. grinding diameter: 100 mm Max. clamping length: 280 mm Max. grinding length: 250 mm Workpiece spindle speed: 150 - 1350 rpm (infinitely variable) Centre height: 100 mm Swing diameter: 180 mm Grinding spindle speed: 2250 / 2750 rpm Grinding wheel diameter: 300 mm Grinding wheel width: 60 mm Workpiece spindle taper: MT4 Tailstock taper: MT2 Power requirement: 4.5 kW Dimensions (LxW): 2.5 x 2.9 m Weight: 1700 kg The machine comes from a training workshop at a rehabilitation clinic and is in very well-maintained condition.

Condition: excellent (used), functionality: fully functional, Wolfking C-160 UNI Grinder capacty up to 6000 kg / hour 160 mm hole plates Very strong and reliable grinder! Dkjdpfexl Txusx Aduju

Condition: new, Year of construction: 2024, Ref:10718 . NEW 2024 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Including accessories & spare parts. (In-house compressed air supply required). Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW Dsdpet Dpwdefx Adujku

Condition: like new (used), Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total length: 2,600 mm, total width: 2,340 mm, GF Machining Solutions CUT P550 Pro Year of manufacture: 2022 Uniqua Control Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Integrated Collision Protection (ICP) on all 5 axes Cutting speed of 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.10 to 0.33 mm (with WIRE100 option) Dsdpexl Suujfx Adujku Including Taper Expert option for 0.25 mm wire Including AC-Setup 3D option Including wire chopper option Including horizontal manual annealing option Including automatic central lubrication option Including active thermal stabilization option Including SparkTrack option Including iWire option Including kit for 0.10 mm wire Overall system dimensions: 2,600 x 2,600 x 2,340 mm Total system weight: 3,300 kg The machine will be cleaned, serviced, and fully tested for all functions by us upon order placement. You will receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine.

Condition: used, Year of construction: 2003, Price: On request EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Video available Documentation available Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg - Year: 2003 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dksdpfx Adswnhfkeuou Lukas van Rossum

Condition: good (used), Year of construction: 2003, functionality: fully functional, Machine-Details Stock-No. 1022-2403 Type of machine Gear Hobbing Machine - Vertical Make GLEASON-PFAUTER Type P 600 Year of manufacture 2003 Type of control CNC Storage location France Country of origin Germany Delivery time Immediately Freight basis Ex site, loaded on truck Technical details max. wheel diameter 600 mm gear width 600 mm max. module 12 Control SIEMENS 840 D radial adjustment (X) 420 mm Dodpfxexl R U Te Adueku tangential adjustment (Y) 300 mm axial adjustment (Z) 600 mm milling head -swivable +45° / -60° deg table diameter 600 mm table bore diameter 200 mm table turning speeds 0 - 21 U/min hob dia. - max. 240 mm hob turning speeds 30 - 300 U/min feeds (X/Y/Z) 10/3/10 m/min total power requirement 70 kVA weight of the machine ca. 18,0 t dimensions of the machine ca. 5,5 x 6,0 x 3,7 m Additional information * CNC-control SIEMENS Sinumerik 840 D * Counterholder raised by 300 mm, travel range 630 mm, mounting hole 90 mm * Chip conveyor * Oil mist extractor * Oil cooler

Condition: ready for operation (used), Cable Dereeling Machine, Cable coiler, Cable Unwinder,Ramatech ABW 800/300 Cable dereeling machine, cable unwinder,Ramatech ABW 800/300, used machine Manufacturer: Ramatech Type: ABW 800/300 Overall dimensions: Width: 2270 mm Depth: 1120 mm Height: 2550 mm Dkodpfsxl R Duox Adusu Technical specifications: Maximum cable drum diameter: 800 mm Maximum cable drum width: approx. 650 mm Cable drum load capacity: 300 kg Power supply: 3 × 400 V AC + neutral conductor Operating direction: left to right

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE 52 Mixer / Grinder year of construction 2007 whit Cars HKW 200 lifter for meat bins year 2007. Dedpoxl Twwefx Aduoku

Condition: good (used), Year of construction: 1985, Technical Data – Bridgeport Series I Table Size / Work Area 9″ × 49″ (approx. 299 mm × 1245 mm) T-Slots 3 slots, spacing 2.5″ (approx. 64 mm), slot width 0.625″ (approx. 16 mm) Travel Paths X (Longitudinal) without power feed: 36″ (approx. 914 mm) with power feed: 33″ (approx. 838 mm) Traverse Y (Cross Travel) 12″ (approx. 306 mm) Quill Stroke (Quill Travel) 5″ (approx. 127 mm) Knee Travel (Z-Axis/Table Elevation) 16″ (approx. 406 mm) Ram Travel (Headstock Fore/Aft on Ram) 12″ (approx. 306 mm) Min./Max. Distance Spindle Axis to Table Top (Spindle to Table Surface) min: 2.5″ (approx. 64 mm) max: 18.25″ (approx. 463 mm) Min./Max. Distance Spindle to Column Front (Min./Max. Throat) min: 6.75″ (approx. 171 mm) max: 18.75″ (approx. 476 mm) Spindle / Quill Spindle diameter: 1.875″ (approx. 48 mm) Quill diameter: 3.375″ (approx. 86 mm) Spindle taper (standard): R-8 Spindle Motor / Power 30 min. rating: 3 HP (approx. 2.2 kW) Continuous duty: 2 HP (approx. 1.5 kW) Spindle Speed Range (variable, two speed ranges) Low: 60 – 500 rpm High: 500 – 4200 rpm Drilling Capacity (Power Quill Feed, mild steel) approx. 3/8″ (approx. 9.5 mm) Milling Capacity (mild steel, cutting) approx. 2 CI/min (Cutting Inches per Minute) Drilling Radius (mild steel) Dkedpfoxl R N Dsx Adueu up to Ø 6″ (approx. 152 mm) Traverse Speeds (X/Y) manual / automatic up to 100 ipm (approx. 2540 mm/min) in CNC models Machine Footprint & Height Floor space: 84″ × 120″ (approx. 2140 mm × 3048 mm) Overall height: 87″ (approx. 2210 mm) Net Weight / Shipping Weight Net weight: approx. 1930 lbs (approx. 875 kg) Maximum Workpiece Weight (on table) approx. 750 lbs (approx. 340 kg)

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Dkedpfxexl R Hvj Aduou Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: good (used), functionality: fully functional, Chamber shrink wrapping machine S 560 Max. output: 300 pcs/h Max. film width: 600 mm Max. film diameter: 300 mm Dkodpfx Adsxl Rn Hsuou Film thickness: 10-50 µm Dimensions: 150x79xH110 cm, 130 kg 230V/50Hz Including consumables

Condition: like new (used), functionality: fully functional, In this offer you purchase a used colour production system "Canon imagePRESS V1000 ’ from 12.2023 Object of sale: Dkedpou Tqnujfx Adusu 1 x Canon imagePRESS V1000 with the following equipment: 5212c003 - Canon Fixing Station V1000 5948c003 - Canon Resale Licence 5222c003 - Canon Booklet Finisher AF1 5214c003 - Canon Multi-Drwaer Paper Deck E1 5936c001 - Canon PrismaSync 5606c001 - Canon Duplex Colour Image Reader P1 5261c001 - Canon Operator Attention Light A1 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,686,664 pages Condition: This offer is for a used device which is in mint condition. The device has been fully tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Year of construction: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing cutter unit, including DIA tooling. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station with radius R 2.5 mm. Technical specifications: - Hot-melt glue application to the workpiece for edge material up to 3 mm. - 60 mm workpiece thickness without jointing aggregate, 40 mm with jointing aggregate. - Maintenance-free, coated glue pot. - HF end trimming station (16,000 rpm) for front and rear edge overhang. Dkedpoxl Rmcefx Aduju - HF milling station (16,000 rpm) with replaceable insert cutter (combination type) and fine adjustment accessible from the operator side. - Spaces available for additional processing units (Hebrock system). - Feed rate approx. 10 m/min. - Adjustable cutting depth for trimming saw. - Signal lamp for workpiece sequence. - Robust chain drive. - Ergonomically arranged control panel. - Double roller top pressure beam. - Viewing windows for aggregates from both rear and operator sides. - PLC control including touchscreen. Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic including cooling and anti-static spray unit, 2014, 1 unit hot air aggregate for creating the optical zero-joint using special edge materials intended for this purpose. Including: - Pneumatic glue pot positioning - Cooling and anti-static spray unit - Two additional quick-change edge channels - Special version for corner rounding unit, max. workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Retrofitting possible later (additional costs on request) Technical data (Airtronic & corner rounding unit): - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Operational in approx. 2 minutes - Special version, minimum workpiece thickness 8 mm Further accessories and upgrades available on request: - Airtronic retrofitting on PLC machines, only possible at the Hüllhorst–Oberbauerschaft factory - Upgrade to edge thickness 8 mm, up to max. workpiece thickness 40 mm, with pneumatic saw adjustment - Special infeed fence for overlaid panels, 16 mm and 19 mm thickness, max. glue overhang 8 mm, separate pneumatic milling cutter adjustment (straight/radius) controllable from operator panel - Buffing station (swabbel), 1 unit - Corner rounding unit, 1 unit, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Ball bearing for corner rounding cutter 24.1 mm: 1 unit - Ball bearing for corner rounding cutter 24.2 mm: 1 unit - Corner rounding unit for 60 mm workpiece thickness: 1 unit - Quick-change device for the corner rounding unit: 1 unit - Exchange motor 0.37 kW for the corner rounding unit: 1 unit, including terminal box with electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or optionally Siko counter, including R 1.0 mm radius cutter, 24.1 mm bearing for corner rounding unit: 1 unit, 24.2 mm: 1 unit - Radius scraper: 1 unit with pneumatic lift-off device, radius R 2.0 mm and R 1.0 mm - Flat scraper: 1 unit with pneumatic insertion control - Glue station changeover system including glue outlet device downward (preparati

Condition: excellent (used), functionality: fully functional, Garos injector and tenderizer, type: 128/576 PLC, machine number: 39910026, 400/480 V, 50/60 Hz, 6 bar, 1670 kg, 128 needles, clearance: 550 mm x 310 mm, s/s walking beam, beam width: 550 mm, Very strong machine whit high capacity for both Injection and Tenderizing products. Dsdjxl Twkspfx Adueku

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Grasselli NSL 600 Vertical meat slicer for perfectly even slices. The machine can slice both bone-in and boneless meat. Dkodpfx Adjxl Tvtsuou Extreme precision even for thinner slices at high capacity. Capacty up to 2000 kg / hour. Splitting 5 mm.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Formcook mod Combi 650 1.108EFS Teflon belt fryer whit flip on the middle year of construction 2011. Belt wide 650 mm. Dksdpexl Tucjfx Adueu

Condition: excellent (used), functionality: fully functional, Magurit typ 152 cutting machine for frozen blocks. Dsdpfxexl Trze Aduoku

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Karl Schnell 445R Combi Grinder whit breaker 645 mm whit 44 mm teeth. Complete machine whit Karl Schnell conveyor system in stainless steel or by a Nimo-KG lifter. Year of construction 2007. Dkodpfx Adsxl Trbjuou Capacity 10 000:- kg Frozen meat / hour or 25 000 kg / hour for fresh meat. Complete package in very good condition!

Year of construction: 2019, condition: like new (used), functionality: fully functional, AUTOMATIC PACKAGING MACHINE FOR PRODUCTION RATES UP TO 4000 PACKS/HOUR whit a cup diameter of 60 mm. Dsdpfx Aexl Tpaedusku Year of construction 2019 Intermittent rotary unit with 8 stations for container movement. · Destacking system for rigid, stackable containers. · Dosing head for liquid, viscous, solid or powder products. · Lift system for containers to allow filling from the bottom of the container. · Hopper for feeding product. · Anti-dripping nozzle. · Destacking system for pre-cut aluminium lids. · Heat sealing removable system for container and lid, for easy cleaning and maintenance. · System for extracting the container from the rotary unit. · Powered conveyor for extracting the container from inside the machine.