Used Windows Tools for sale (47,093)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation Nedpezzx H Aofx Af Solg ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L Nledpfxez D R S Tj Af Seg 14 - Transverse conveyor at the outfeed SCM

Condition: ready for operation (used), Year of construction: 1988, Window manufacturing machine Manufacturer: Okoma Model: UF1 S Year of manufacture: 1988 Nlodpfsyk Haqox Af Seg with tool

Condition: like new (used), Year of construction: 2023, machine/vehicle number: IV68/ IV78 /V88, functionality: fully functional, operating hours: 30 h, Professional Cutter Set for Spindle Moulder / Edger – Double-glazed Timber Frame, Like New For sale: complete set of interchangeable carbide cutters from Lehmann – Caul (Tool Experience), used only 3 times for manufacturing IV68 timber frames. This lot includes a full range of carpentry tools suitable for profiling and machining double-glazed timber frames: ✔ Opening cutters (A1, A2, A3, A4, A8, A9, A10) ✔ Fixed frame cutters (B1, B2, B3, B5, B6, B8, B10) ✔ Complementary/Counter-profile cutters (C1, C2, C4, C5, C8) ✔ Special tooling (e.g. D4) ✔ Professional-grade reversible carbide knives ✔ Several reducing rings All tools are fully compatible and modular—no missing parts for standard timber frame manufacturing. New value: €15,340 (with invoice) — 🔹 Condition: Excellent / barely used 🔹 Bore: 60 mm (majority of cutters) 🔹 Diameters: from 197 mm to 353 mm depending on model 🔹 Suitable for industrial spindle moulders, production optimized Nedjx Dmgiepfx Af Solg Why this is an opportunity: ✨ Complete ready-to-use set ✨ Condition like new ✨ Perfect for professional joiners or manufacturers ✨ Immediate productivity boost ✨ High new purchase value — Who is this for: ✔ Timber joiners ✔ Door and window manufacturing workshops ✔ SMEs or craftsmen seeking a professional-grade set ✔ High-end tool collection Further information: 📍 Collection in person possible 📦 Professionally packed for shipping 📸 Detailed photos available on request

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Nodpfxewgmyqo Af Selg Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: good (used), functionality: fully functional, Welding line with logistics (URBAN year 2008 / SOENEN year 2018) URBAN welding line – €10,000 Nljdpfx Afsv Enw Ns Seg SOENEN welding line with logistics – €25,000

Condition: used, Year of construction: 2009, ZOLLER GmbH Model Smile 400 Machine Type Optical CNC Tool Presetter / Tool Measuring Machine PROGRAM: PILOT 3 Measuring System Optical camera measuring system CNC-controlled measuring axes Automatic tool presetting Digital tool length and diameter measurement Measuring Capacity Maximum tool length: 400 mm Maximum tool diameter: 320 mm Maximum measuring radius (X): 210 mm These are the standard specifications for the Smile 400 platform. Tool Interface Installed with: SK50 measuring adapter Compatible with other Zoller adapters (HSK/SK/BT/CAPTO depending on tooling). Control PC-controlled measuring software Industrial Windows Embedded PC Optical camera measuring system Industrial PC ZOLLER IPC Model: ZQ57 / 9G (Chassis 5G) Intel Core i3 processor Windows Embedded 80 Plus Bronze industrial power supply LG DVD-RW drive USB ports Monitor HP EliteDisplay industrial monitor Power Supply Industrial IPC: 100–240 VAC 50–60 Hz 4–8 A Accessories Visible SK50 master gauge Multiple tool adapters Calibration/master setting tool Industrial keyboard Mouse Complete cabinet Measuring station Industrial PC Nedpfxszqdpbe Af Sjlg Machine Configuration Granite measuring base Vertical measuring column Camera measuring system Computer workstation Optical presetting system Applications Suitable for presetting: End mills Face mills Drill tools Boring bars Shell mills ISO40 ISO50 SK40 SK50 HSK tooling (with appropriate adapter) Approximate Weight Approximately 215 kg for the measuring unit (excluding workstation and accessories).

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle Nodpfx Afjz Euxas Selg ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools Inclusive: 1 tool set of Stehle IV68 Wood tools also included ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for I...

Year of construction: 2018, condition: excellent (used), The following systems have been processed: Profile Kömmerling, 76AD, 76MD, 76Unity, 88MD # High-temperature welding # Welding strip quick-change system Spacer quick-change system Diagonal or parallel joining process Resilient intermediate plates for tolerance compensation Heated boundary plates Weld bead limitation on support and clamping plates 2 mm (optionally 0.2 mm possible) Heated weld bead limitation Weld parameters individually programmable Safety device according to CE Horizontal outfeed device Control technology High-performance JetControl control ensures high ease of operation Intuitively operated information management system with diagnosis and reporting tool Digital visualization of maintenance intervals Display of the profiles to be inserted, indication for profile and spacer changes Individually programmable welding parameters Operating system Windows High-quality PC with 19" TFT monitor USB ports DVD drive # Keyboard and mouse # Data management via database Technical data: Minimum overall depth: 45 mm Nedpjz Ep Ezefx Af Sslg Maximum overall depth: 120 mm Minimum profile face width: 25 mm Maximum profile face width: 130 mm Working area: 3,000 x 2,300 mm Minimum element size: 320 x 320 mm Maximum element size: 2,600 mm in the running direction Maximum element size: 3,000 mm width Maximum element weight: 80 kg Electrical connection: 230 / 400 volts, 3 phases, 50 Hz Compressed air connection: 7 bar # Air consumption: 50 L/min

Condition: used, Year of construction: 2011, max. workpiece length 4100 mm profile spindle 8 Stück main drive 16 kW Control SIEMENS Working Process Wooden Window Production Line ----- Sale on behalf of the client; ex-site. System can be viewed while still in operation! System comprising: Item 1: Infeed conveyor following the planer (planer NOT included, can be bougth additonally as option)) Item 2: Working Process Sapiens, Year of Mfg. 2011 (end-grain milling and drilling) - Spindle 1: 10 kW, HSK-E63, A/C-axis - Spindle 2: 10 kW, HSK-E63, A/C-axis - Spindle 3: 16 kW, HSK-E63, C-axis - Spindle 4: 16 kW, HSK-E63, C-axis Item 3: Transport system to LOGOS SCH Item 4: Working Process LOGOS SCH, Year of Mfg. 2008 (end-grain and longitudinal milling and drilling) - Spindle 1: 16 kW, HSK-E63 - Spindle 2: 16 kW, HSK-E63, C-axis - Spindle 3: 10 kW, HSK-E63, C-axis, A-axis - Spindle 4: 3 kW, fixed configuration, for 2 tools (e.g., for weather-seal grooves, wood-aluminum clip slots, etc.) Njdezughuopfx Af Solg - Central pick-up tool changer with 95 tool positions Item 5: Outfeed conveyor Detailed descriptions and layout available upon request! (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 2731660/C 0000, functionality: not functional, operating hours: 44,050 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Nlodperl Rwxjfx Af Sog Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Window patcher KOHMANN - 750 - age 1999 Single Stream Length punched min. 100mm / max. 1020mm Width punched min. 80mm / max. 750mm Film length min. 50mm / max. 720mm Width film min. 30mm / max. 540mm Timed bottom Feeder Large Selection of Operating Cams Slitting/perforating Film unwind, Continuous Belt Delivery, Suck Blow Pumps Electrical Control Cabinet Manuals Tools Located: Europe Western Nlodpfx Afsyzyhwe Sog Current State: In production Available: Immediately More pictures and video is available. PRICE under request.

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: AA1/8677, functionality: fully functional, overall weight: 3,570 kg, Equipment: documentation/manual, For sale: SCM Method K window manufacturing machine Nlsdpfoyti R Rox Af Sog Includes: - slotting spindle - cross-cut saw - 2 profiling spindles - assembly spindle - top spindle (roller shutter groove) - Stehle IV 68 window tool set - floppy disks + complete documentation Year of manufacture: 1995 Very good condition

Condition: good (used), Year of construction: 2001, Hydro-pneumatic drive Operation via foot valve Rod force at 10 bar = 50 kN Maximum installation height: 140 mm Rod stroke: 40 mm Outreach: 110 mm Nedpoz D Aztofx Af Sjlg Includes: Base frame Rotating table for 5 tools

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Nlsdpfxoz Agy Ho Af Sog Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed Nodpfx Afjy T R Tuj Sjlg 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: used, Year of construction: 2008, Mazatrol Matrix CAM PC workstation with full-featured 5-axis license (incl. PCI card & PC) Description: A complete, ready-to-use PC workstation with the powerful Mazatrol Matrix CAM software is for sale. The license is perpetual and hardware-bound via a PCI card. The system was used on 5-axis machines (Integrex e-1060 V8/II) and includes rare high-end options. The PC has been recently reinstalled and is fully functional. Ideal for companies with an older Mazak machine park looking for an independent programming solution. Details on license & options: The following key options are unlocked and active (see photos): - 40 SIMULTANEOUS 5 AXIS (simultaneous 5-axis machining) Nedpfx Aex Sq Nmof Solg - 49 TILTED WORKING PLANE - 55 TOOL CENTER POINT CONTROL Additional basic options such as EIA, Smoothing Control, Spiral, etc. (see photo of the options menu) Scope of delivery: - PC system: Windows 7 Pro x86 (32 Bit), Intel i5-3470 3.2 GHz, 4 GB RAM, AMD Radeon HD7570 GPU. - The fully functional computer with installed operating system (Windows 7 Pro_x86) and pre-installed software. - PCI license card: The physical license hardware installed in the PC. - Original packaging: The original packaging of the software as shown. Documentation: Manual, original CDs/media

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65086, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC530, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Njdoz Apdnjpfx Af Sslg TECHNICAL DETAILS Travel range, X-axis: 2,900 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 700 mm Spindle speed: 6,000 rpm Tool interface: SK40 Number of tool magazine positions: 24 MACHINE DETAILS Control system model: Heidenhain TNC530

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Nlodpfx Afozm Hr Ro Sog Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 70,000 W, spindle speed (max.): 14,000 rpm, travel distance X-axis: 450 mm, overall weight: 32,000 kg, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 5, This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details. • Control: Siemens 840D solution line (NCU 720.3), OP19 touchscreen + Siemens TP700 touch panel • Simultaneous machining: 5-axis; B‑axis turning • Workpiece capacity: max length between centers 4,000 mm; max diameter for milling 180 mm; chuck size Ø260 mm • Power supply: 3 × 400 V / 50 Hz; main fuse approx. 200 AAxes • X: travel 450 mm; rapid 20 m/min • Y: travel −80 / +150 mm; rapid 20 m/min • Z: rapid 25 m/min • B: swivel range ±45°; max swivel speed 90°/s; clamping torque 5,000 Nm • C: max speed 50 rpm; max torque 1,740 Nm (cont.) / 2,580 Nm (40% duty) • W (tailstock slide): rapid 15 m/min • VZ1 / VZ2 (steady rest slides): rapid 15 m/minTurning / Milling Unit • Unit: UFE-400; tool spindle: MDFK • Power: 45 kW (continuous) / 70 kW (40% duty) • Max spindle speed: 14,000 rpm; nominal speed: 1,560 rpm • Torque: 275 Nm (continuous) / 430 Nm (40% duty) • Tool interface: HSK 100‑T (compatible HSK 100‑A / HSK 100‑T); additional interface: Capto C8 • Internal coolant: 80 bar; 20 l/minTailstock • Hydraulically operated quill; diameter 190 mm; stroke 200 mm; Morse taper MK6Machine equipment / configuration • Front and rear self-centering steady rests; independently CNC-positionable • 2 prismatic steadies for screw milling • Steady jaw ranges: 15–30 / 30–65 / 65–140 / 140–200 mm • Hydraulic SMW KNCS‑N 260 power chuck with quick jaw change • Central lubrication system • Fully enclosed machine housing with driven safety doors; Visiport inspection windows • Hydraulic and pneumatic systems • Coolant and oil mist extraction preparation • Electronic hand control for B/C/X/Y/Z axesSoftware / control functions • Siemens Safety Integrated; Profibus / Profinet; OPC UA interface • 5‑axis simultaneous machining; B‑axis turning; TRANSMIT / TRACYL • Temperature compensation X/Y • DNC remote diagnostics; WMDS Diagnostic System; Telediagnosis capability • weinCAD EXTRUDER DESIGNER; WeinEXT – Praxis Additional equipment • Hinge-belt chip conveyor • Coolant filtration system KF 200: 1,400 l tank; 40 µm filtration; high‑pressure pump 80 bar / 46 l/min; low‑pressure pump 13 bar / 160 l/min; automatic oil skimmer Nljdpfxsz D Efhj Af Seg • Oil mist extraction unit: airflow approx. 4,000 m³/h • Operating platform with stairs and railing

Year of construction: 2024, operating hours: 150 h, condition: like new (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,500 Y AXIS (transversal) (mm) 1,280 Z AXIS (vertical) (mm) 640 A AXIS (vertical-horizontal rotation of the head) -90° ÷ +90° C AXIS (rotation on the vertical axis of the head) 0° ÷ 360° H AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 P AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 Nledoz Dpduopfx Af Ssg ELECTRIC SPINDLE Maximum power in S1 (kW) 11 Maximum power in S6 (60%) (kW) 13.5 Maximum speed (rpm) 24,000 Maximum torque in S6 (Nm) 10.7 Tool holder taper HSK – 63F Maximum blade diameter 400 mm

Year of construction: 2018, condition: used, Schüco Aluminum/PVC CNC machining center – Model RSA-VM (BJM Ing., 2018) The Schüco RSA-VM is a CNC trimming and cutting machine (Rollen Sägemaschine / Reinigungs- und Sägemaschine) designed for the precision processing of aluminum and PVC profiles used in window and door manufacturing. Main Features * Precision Cutting & Trimming: Performs accurate cutting and edge trimming of Schüco aluminum or PVC profiles. Nljdpfxsxqmr Ee Af Sog * Deburring & Cleaning: Removes burrs, weld beads, and surface residues after cutting or welding operations. * High-Quality Finishing: Ensures excellent dimensional accuracy and surface quality prior to frame assembly. * Optimized for Schüco Systems: Fully compatible with Schüco profile geometries, supporting efficient and repeatable production. Applications Ideal for use in window and façade production lines, where reliability, precision, and surface quality are essential.

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Nledpeq R Tnzsfx Af Seg Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 2010, max. workpiece length 4500,6000 mm profile spindle 4 Stück Nedpfx Aszqvnief Sslg main drive 30 kW Weinig Conturex C226 Machining Center ----- For sale on behalf of a client; includes software (Klaes) and tooling (Oertli) for IV68/IV78/IV92 and Wood/Alu 68–92 systems. Machine still is electrically connected. Technical specifications and window cross-sections available upon request! ----- Price of the above-mentioned machine available upon request! ----- Dismantling and reinstallation available upon request! (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) All prices are net, plus statutory VAT.

Year of construction: 2019, condition: good (used), machine/vehicle number: 157, Offer 22273 Technical data: - Stroke: 30 mm - Air consumption per stroke: 5 l - Pneumatic connection: 8 bar - Space requirement: approx. W 500 x H 550 x D 500 mm - Weight: approx. 70 kg - Includes: - Foot switch - Mobile machine base: W 600 x H 830 mm - Various tools by HUECK Njdpfxeiv Hz De Af Selg