Used Windows Line for sale (20,399)

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  - Capacity: Max 6,000 b/h - Formats: - 0.210L, - 0.355L, - 0.500L glass bottles - 26mm metal crown caps - Dimensions: Kdedpjvm U Dlsfx Ahbeu - Width: 5,300 mm - Depth: 2,630 mm - Height: 2,860 mm - Weight: 8,000 kg - POWER SUPPLY: - Main: 460V – 60Hz – 3F+N+T - Auxiliary: 24V DC - Machine main motor: 4 kW - Installed power: 9 kW Scope of Delivery  - Triblock (rinser, filler, and capper) - Selfadhesive Labeller with 2 stations - Conveyors

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 Kdedpfovptt Rex Ahbju - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: excellent (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm Kdodpfxjxtvgke Ahbou > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  - Capacity: max. 1,500 bph (1,000 bph were actually run)  - Bottled product: Beer   - Included formats: 0.33l longneck, 0.5l NRW  - Closure: Crown cap  Scope of delivery  - Bottle washer | SEN | 1989 (overhauled and installed in 2020)  - Isobaric filler block | Shandong Yuesheng | 2019   - Rinsing positions: 14   - Filling positions: 12   - Capping positions: 5   - With pre-evacuation   - Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  - Dry tunnel | Shandong Yuesheng | 2019  Ksdpfx Aexgfr Njhbjdu - Labeler incl. laser printer   - Collecting table  

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Kdedpfoxlq Nwex Ahbsu Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is See video Availability immediate

Condition: excellent (used), Double STDN pancake baking carousel system. Superb system designed for reliable high volume production of pancakes and crepes, blinis etc. Extremely hard to find on the used market. diameters can be adjusted from 30mm to 240mm and weights from 8g to 100g. New cost of this system is in excess of 500,000. We also have a continuous waffle manufacturing line for sale. Kdedpfxsxlra Rj Ahbju

Condition: excellent (used), Brochure: Horizon SPF 20a Ksdpjwz Skqofx Ahbsdu Trimmer: FC 20a

Condition: used, Board repacking line Manufacturer: PlanSel/Nordautomation Pack chain conveyor Tilt hoist Board elevator Edge cutting system Measurement system Kdodoykauzjpfx Ahbju Stacker with spacers Outfeed chain conveyor Boards till 6 m

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 5,000 L Ksdpoykn Rdefx Ahbedu Internal Pressure: 6.6 bar Internal Temperature: 200°C Jacket Pressure: 6.6 bar Jacket Temperature: 200°C Legs/Lugs: Lugs

Condition: ready for operation (used), Year of construction: 2023, 3-meter automatic wood length gluing press Kdjdpfsylqc Esx Ahbeu

Condition: excellent (used), Year of construction: 1992, Complete production line Omag Tronic 140/120 - Siemens S5 Kodpfx Ahsz Ngzijbodu - elevator - lowerator - finger car - cuber - foiling device Messersi 2011 - washing device Schindler 2007 - 15 moulds - 3000 production boards 1400/1150 - double mixing plant Skako 2250l + 750l with skips, cement weights, flying bucket, color mix

Condition: excellent (used), SIZING-TENONING LINE, composed of the following machines: A) Loader (portal/bridge) double pick-up station "SAG" CAR MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 C) Turning Station "SAG" Mod. Girapannelli (from lengthwise to crosswise) with double cone system. Ksdpfezzzupsx Ahbjdu D) 2nd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 E) Turning Station "SAG" Mod. Girapannelli, (from lengthwise to crosswise) with double cone system. F) 3rd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 H) Stacker (portal/bridge) double stacking station "SAG" CAR/S MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: excellent (used), Year of construction: 2012, Inline cooking line for pasteurizing processed cheese, heating from the initial mixing temperature to approximately 85°C for filling or further processing. The line consists of: Buffer Tank The buffer tank is used for the temporary storage of processed cheese prior to further processing or filling. The product is maintained at approximately 15°C to preserve quality and ensure optimal viscosity. This stabilizes the process flow, balances fluctuations in upstream and downstream operations, and helps maintain consistent product properties. Volume: 400 kg Model: Zufühfbehälter 400 Type: 670 Machine No.: 14616 Installed power: 22 kW (46A) Year of manufacture: 2012 The buffer tank is equipped with: - Tank with 2 feed augers, CIP cleanable. - Stainless steel covers - Load cells for weight indication on the buffer - Outfeed pump - CIP return pump (Fristam model: FPE3532/155, 7.5 kW) Inline Cooker The inline cooker is used to continuously heat and process the cheese mixture from approximately 15°C to 85°C. During this step, the product is thermally treated and homogenized by a high-shear mixer to ensure optimal mixing of steam into the product and to achieve the desired structure and consistency. This ensures efficient processing, uniform product quality, and a stable flow for downstream operations. Kdjdpfxezxc Dme Ahbou Heating unit specifications Model: FL / Erhitzungseinheit Type: 261 Machine No.: 14217 Installed power: 17 kW (37A) Year of manufacture: 2012. The controls are excluded.

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling Kdodpfx Ahozxc Ncobeu A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: excellent (used), FLEXIBLE CNC DRILLING AND MILLING LINE, for drawer fronts (or similar panels) 231200A) Automatic panel loading system, with “KUKA” robot, Mod. KR 120 R3200 PA 231200B) “COMEC” CNC machining centre (panels through-feeding) Mod. Frontal 1000 3S CN CA Gantry (Portal) CNC machine - Overall integral safety cabin (enclusure) of the machine Movable panel (workpiece), horizontal position - Movable working head Panels (workpieces) feeding by motorized belts In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 50 x 15 Maximum workpieces dimensions (X - Y - Z) mm 1100 x 350 x 30 Total installed power (Kw) 28 (ca.) WORKING GROUPS 1st station: upper vertical CNC drilling (point-to-point) Kjdjzxn Nzepfx Ahbsdu 2nd station: CNC milling for slots/grooves (with horizontal electric spindle) 3rd station: 2 upper vertical CNC drilling units (point-to-point) 4th station: lower vertical CNC drilling (point-to-point) 231200C) Automatic panel unloading system, with “KUKA” robot, model KR 120 R3200 PA

Year of construction: 2012, condition: excellent (used), Welding and cleaning line in a 90° configuration, running from right to left, consisting of a 4-head welding machine SMK 504, a cooling table, and an automatic cleaning machine EPA 479 with a turning station. Maximum welding size = 3,570 mm x 2,500 mm, currently programmed for Kömmerling 76 AD, 88 MD profiles. CNC cleaning machine with corner and shear hinge drilling device for Siegenia fittings, sealing strip holder, WINDOWS control system on the welding and cleaning machines, and safety fences. Ksdsz Dihyspfx Ahbjdu Currently set for V-groove processing.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use Kedez D Dxgspfx Ahbjdu • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: new, functionality: fully functional, machine/vehicle number: NM0KKTP64BTS92457, mileage: 210 km, power: 390 kW (530.25 HP), fuel type: electric, overall weight: 8,112 kg, tire size: 315/70 R22.5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,600 kg, battery energy capacity: 290 kWh, all-electric range: 250 km, Year of construction: 2026, operating hours: 10 h, Interested? Feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV - Truck Center Limburg Kdedpfoz D Ez Aox Ahbsu - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl - Garage O.C.M. Srl - GTTS Jourdan SA - Herman Noyens Trucks NV - Marc Vansteenland BV Immediately available.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 1,500 mm, input voltage: 230 V, overall weight: 3,000 kg, input current: 32 A, Machines are as new. We have also one pizzabox printer from Sunthink printing 600mm you can get including packing line. Kedpfx Ahjz E I Sgsbjdu

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Kedpfoz E U D Nex Ahbjdu Availability Available now. Inspection possible. Location: Spain.

Year of construction: 2026, condition: new, The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. Kodpfxjz Alnps Ahbedu 1. Output Range: 70~90Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 18.5 кW 4. Total Power: 29 кW 5. Screw Dia. : 90mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE, LLDPE pelletizing, scraps or rolls

Condition: excellent (used), Year of construction: 2001, - No. 4 Schuler 630-ton presses - Capacity: 630 tons - Stroke: 1,300 mm - Die cushion tonnage: 24 – 160 tons - Die cushion stroke: 200 mm - Die opening (Pmi): 800 mm - Work surfaces: 2,500 x 2,100 mm - Mobile press tables: No. 2 Kdsdpfx Aozy Uvqehbju - Approach speed: 600 mm/min - Working speed (50%): 96 mm/min - Working speed (100%): 46 mm/min

Year of construction: 1994, condition: used, Bottling line - Mustard and horseradish packaging The line consists of: 1. Piston filler - KUPER 2. Machine for closing jars 3. Bottle filler - NOVOPACK Ksdpfozzax Hsx Ahbsdu 4. Machine for separating jars 5. Transporters

Condition: excellent (used), CNC Flexible through-feed DRILLING, ROUTERING AND DOWEL INSERTING LINE Min/Max workpieces (panels) width (X axis) with Author 924: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 924: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 924: mm 100 /1600 (o 800+800) 200027A) Loader (Bridge Frame) "MAHROS" double station, Mod. Runner (max mm 1300) 200027B) Connection transfer unit "MAHROS" (90°) 200027C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 924 - N.4 Vertical electro-spindles (on the Y-axis) (Kw 6,6 ca.) - N.4 upper drilling units, each consisting of: - 1 vertical 36-spindle head - 8 (4+4) horizontal spindles on the Y-axis - 1 vertical 14-spindle heads (on the Y-axis) for fittings - N.2 horizontal units (1 R + 1 L) with N.1 21-spindle drilling head (2x21 = total 42) per unit - N.2 horizontal units (1 R + 1 L) with N. 6-nozzle injection head (2x6 = total 12) 200027D) Connection transfer unit "MAHROS" (90°) 200027E) Stacker (Bridge Frame) "MAHROS", double station, Mod. Runner (max mm 1300) Kjdpfx Aszza Nlohbedu

Condition: good (used), Year of construction: 2014, Koenig Combiline bun production line Kdodezz Ryzepfx Ahbou - used - year of manufacture 2014 - Rex Futura Classic divider - weight range 20-135 g - computer control - maximum output 7,500 units/hour - rounding station, pre-proofing station, stamping station, bun discharge onto trays or baking pans - machine from production - inspected and cleaned - collection from warehouse/shipping option available - price upon request