Used Windings Stator Rotor for sale (1,924)

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 209 mm Ltedpfod Irbcex Affja -Weight: 21 kg

Condition: new, Year of construction: 2025, Automatic stacker with hydraulic lifting, ultra-high performance and super reliable, precision, safety, versatility. Lsdpfov Hp Tnjx Affeta

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm Ltedpfx Afjd It H Njfsa -Weight: 35.8 kg

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate Lsdpfod R Ew Tjx Affota -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm Lsdsd Ira Aspfx Affeta -Short taper: 6 -Weight: 36 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Rezess: Ø 160 mm -Hole circle: Ø 180 mm -Passage: Ø 55 mm Ltsdpfjdrwmdox Affsa -Weight: 14 kg

Condition: used, Year of construction: 2004, Technical details: balancing body max.: 12500 kg balancing body diameter w/o machining unit: 1500 mm bed length: 3000 mm Lodpfx Afju Iczrefjta swing diameter: 2400 über Maschinenbett mm rotor-shaft: Ø 1500 über Bandantreb voltage: 400 / 50 V/Hz drive power: 22 kw connected load: 25 kVA / 20 kW compressed air: 6 bar Weight approx.: ca. 5,5 t dimension machine xH: 3,3 x 1,5 x 2,0 m dimensions electric cabinet: 650 x 610 x 2150 mm Horizontal balancing machine, functional see video, dismantled, ready for loading ex Leipzig. The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Drive block/balancing speed: 5-speed and reverse gear (manual gearbox) max. 80 rpm; 160 rpm; 290 rpm; 470 rpm; 630 rpm. incl. PCX measuring electronics Measuring method force-measuring Measuring range of the electronics Speed 60 to 30,000 rpm. Bearing journal Ø 40 - 178mm / 140 - 445mm 2 base bodies (cast steel body), storage length between the bearing pedestals up to approx. 3000mm, adjustment with hand ratchet via toothed rack, with extension 1500mm 2 bearing pedestals/swing bearing blocks: Center height 1200mm measured in bed; 2x rollers Ø 195 x 56mm; 2x rollers; center distance 205mm; adjustment travel 350mm vertical *

Condition: used, This listing is for a Thermo Scientific 75005701 Centrifuge Rotors and Buckets. The unit is in full working condition and is ready for immediate release. Supplied with 75005702 Buckets. The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are designed for use with the Thermo Scientific ST8 Bench top Centrifuge. This rotor and bucket combination offers enhanced functionality and versatility for efficient sample processing. Lsdpfx Aexxy H Sjffjta Key Features: Compatibility: Specifically designed for use with the Thermo Scientific ST8 Bench top Centrifuge. Efficient Sample Processing: The rotor and bucket combination enables seamless integration with the centrifuge, optimizing performance for reliable and reproducible results. Versatile Capacity: Accommodates up to 4 buckets, providing flexibility to process different sample volumes and formats. Durable Construction: Constructed from high-quality materials, ensuring longevity and chemical resistance. Easy Installation and Removal: Precision-engineered design allows for quick and hassle-free rotor changes, minimizing downtime and optimizing laboratory workflow. Compatibility with Thermo Scientific Accessories: Compatible with a range of Thermo Scientific accessories, such as bucket adaptors and cushion adaptors, expanding the versatility of your centrifuge setup. Applications: The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are suitable for various applications, including: Biological sample processing Cell culture Clinical specimen processing Laboratory testing and analysis

Condition: used, Year of construction: 2006, functionality: fully functional, cooling capacity: 57 kW (77.50 HP), Trane CHHP0L1TKE0N057A refrigeration compressor several units for sale/ ct1968 Manufacturer: Trane Type: CHHP0L1TKE0N057A Refrigerant: Freon Refrigerant type: R134A Ledpfx Aoubakuoffjta Power: 57kW, 400V, 50Hz, 3 phases Dimensions: 1000x630x570mm Several pieces, for sale from stock

Year of construction: 2023, condition: new, Motor cutter, motor stator recycling machine Power:4KW/380V Applicable scope: Recycling copper winding of stator within Φ8cm - Φ25cm. Speed: 8-30p/h Dimensions( L*W*H)：180cm*90cm*195cm Weight: 1450Kg Ltjdpjmcbpcofx Affoa

Condition: used, Technical details: balancing body max.: 800 kg balancing body diameter: 1250 mm Balancing revolution per minute: 190 - 3600 U/min bed length: 2600 mm voltage: 380 V/Hz drive power: 7,5 kw Weight approx.: 1,5 t dimension machine xH: 3,5 x 1,7 x 2,0 m dimensions electric cabinet: B:650 x T:250xH:800 mm Horizontal balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission by means of cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm Measured speed: 1st gear = 190 - 650 rpm. 2nd gear = 400 - 1250 rpm Ltodpfx Aou Upp Toffja 3rd gear = 700 - 2100 rpm. 4th gear = 1200 - 3600 rpm. 2 pick-up blocks whose displacement is manual over the entire bed Schenk measuring device with digital display and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask! *

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DETAILS Maximum balancing weight: 2,000 kg Balancing body diameter without machining unit: 10 mm Bed length: 3,000 mm Swing diameter over machine bed: 2 mm Rotor shaft via belt drive: 10 mm Drive unit balancing speed (5 gears): Max. 80 / 160 / 290 / 470 / 630 rpm Measurement method: force measuring Electronics speed measurement range: 60 to 30,000 rpm Center height measured in bed: 1,200 mm Rollers: 2x 195 x 56 mm Axle spacing: 205 mm Adjustment travel: 3 mm vertical MACHINE DETAILS Ltsdpfx Afew T Sqmsfsa Drive power: 22 kW Compressed air: 6 bar Connected load: 25 kVA / 20 kW Machine weight: approx. 5,500 kg Machine dimensions approx. (L x W x H): 3.3 x 1.5 x 2.0 m Control cabinet dimensions: 6 x 610 x 21 mm EQUIPMENT - Measuring electronics PCX - Base frame (cast steel body) - Mounting length between bearing supports up to approx. 3,000 mm - Adjustment with hand ratchet via rack - Bearing supports/swing bearing blocks: 2 pieces

Condition: used, Power: 4 kW (5 HP) Manufacturer: Forplex Model : FL 1 Type: Hammer mill / Fine impact mill Materials: stainless steel Motor power: 4 kW (3000 rpm) Rotor: hammer plate Ledpfjx Nwwlox Affsta Bag filter Refurbished by our teams: – Seals: new – Grinder bearings: new – Motor pulley: new – Door safety device: key + lock + electrical box housing: new (Allen Bradley Guardmaster)

Condition: used, machine/vehicle number: WMAN26ZZ17Y18xxxx, mileage: 345,000 km, Year of construction: 2007, Please contact ATS Norway for more information Please provide reference number upon request: 19431 Specifications: - Km: Approx. 345,000 - Suspension: Automatic - Full air suspension - 4x2 - Engine brake - Tires (see pictures) - Hydraulic lift - Manual bridges - 280 HP - Euro 4 - 20 foot container - Bed Ledpfx Aovyfakeffsta - Radio/CD - Compressor horn - Rotor beam - Tool box - Videos - Ready for delivery Description: MAN container truck used to transport asphalt equipment. The truck has a hydraulic lift with manual drive bridges. Ready for delivery. Videos are attached. Km: 345000 HK: 280 Technical approved: no EU-approved until: 14.03.2025 Own weight: 10620 Total Weight: 15000 Payload: 4305 Width: 250 Length: 1100 Euro: 4 Model: TGM 15.280 Gearbox: Automatic

Year of construction: 1996, condition: reconditioned (used), Stock-No.1624 Strand "spagetti" pelletizer Capacity 500 kg/h Drive 4 kW Ltedpfxsby I Syj Affsa Rotor width 200 mm - double bearring materials: PP,PE,PS,PET,PC,PA div material Noise- protected housing box OPTIONAL against additional cost: adjustable pellet length device Ask for our machine-stock-list, with more pelletizing equipment ex our stock availabe.

Condition: excellent (used), Slip ring, rotary joint, rotary transmitter, slip ring rotor, rotary head slip ring, column slip ring, slip ring transmitter -comes from: HUSS Rides, manufacturer of leisure facilities -Slip ring: 10 x copper rings -Interior opening: Ø 600 mm Ltsdpfx Aob A H Atsffea -Outer diameter: Ø 720 mm -Installation height: 410 mm -Number: 2x slip rings available -Price: per piece

Condition: used, mileage: 32,951 km, power: 125 kW (169.95 HP), first registration: 05/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1035. PD82690 ----EQUIPMENT---- * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated and foldable – with integrated indicators * Cargo area floor: "Easy Clean" vinyl floor covering * Package: Cargo protection package 1 – "Easy Clean" cargo area floor – wheel arch cladding – high side wall cladding * Tire pressure monitoring system * High side wall cladding up to the roof * Partition wall (metal) * 6-speed manual transmission * Anti-lock braking system with electronic brakeforce distribution (EBD) incl. – Electronic safety and stability program (ESP) with traction control (TCS) – Hill start assist – Side wind assist – Emergency brake assist – Rollover protection – Emergency brake support including emergency brake light * Driver-side airbag * Exterior mirrors, electrically adjustable and heated – with integrated indicators * Battery: programmable battery runtime, settable to 10 min * On-board computer with consumption and mileage data (e.g. remaining range) as well as outside temperature display and Ford ECOMode * High roof * Rear double-wing doors with 180° opening angle (without windows) * Rev counter * Third brake light * Electric front windows with quickdown/up function for driver’s side * Ford Easy Fuel – convenience fuel filler cap and misfueling protection * Alternator, high-performance version * Low-beam headlights: halogen headlamps with daytime running lights * Lockable glove compartment * Interior lighting with delay and front reading lamps * Front air conditioning including dust and pollen filter * 70 l fuel tank * Paintwork: solid color * Cargo area lighting * Steering wheel: artificial leather steering wheel * Steering column, height and reach adjustable * MyKey key system – individually programmable spare key * Fog lights * Emergency call assistant * Package: Technology Package 9 – Heated windscreen – Rain sensor wipers – Front and rear parking pilot system – Active emergency brake assist (camera-based) – Lane keeping assistant with drowsiness warning and high beam assistant, additionally with lane keeping aid – Headlamp assistant with day/night sensor – Cruise control – Fog lights – Ford audio system * Particulate filter: diesel particulate filter * Radio: Ford audio system with radio and DAB+ – radio (FM/AM) – digital radio reception DAB/DAB+ (Digital Audio Broadcasting) – MyFord Dock – FordPass Connect – speakers, antenna – audio remote control on steering wheel – Bluetooth interface – USB port – hands-free system * Automatic entry light for sliding door when opened * Sliding door: right-hand side * Rear mud flaps * Side protective strips * Power steering * Seat belts – front seat belt tensioners and force limiters * Seat package 13 – Driver’s seat, 4-way adjustable (forward/back, backrest, seat cushion angle, height) – Double passenger seat with storage compartment under individually folding seat cushions – Headrests, height adjustable – Integrated folding table in double passenger seat – Driver’s armrest – Manual lumbar support (driver’s seat) – Seat covers: fabric Ltsdpfex Nlb Eex Affja * Start-stop system * Partition wall (plastic) at B-pillar height * Rear bumper with integrated step * Recirculation function * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control * Overhead storage compartment in front ... and much more. ----The vehicle is in an unprepared condition!

Condition: used, Year of construction: 2006, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crusher plant, twin-shaft shredder, slow-speed, drive: electro-hydraulic, 200 kW electric motor, hydraulic unit with control cabinet and operator panel. The plant has been out of operation for approx. 0.5 years. Two brand new rotor shaft bearings and labyrinth seals were installed on the drive side two years ago. Electrical and hydraulic systems are untested: must be connected. Ltjdpfxjx Nkdrj Affoa

Condition: used, Used Netzsch model LMZ2 stainless steel bead mill with associated parts. Unit has stainless steel peg style rotor and stainless steel jacketed chamber. Unit driven by 7.5hp, 230/460volt, 1770rpm, 3/60 electric motor with transformer. Unit includes mechanical seal. Approximately 2 litre capacity. Unit includes feed pump and control panel. All mounted on stainless steel base. Ljdpfsx Niwqex Affota

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Lodpod E R D Sjfx Affeta Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Year of construction: 2022, condition: as good as new (ex-display), strand-pelletizer type Alphatec AS-G 200 Rotor width 200 mm ᐳ hard-metall cutting rotor drive 7,5 kW - AC speed frequency controlled Capacity 700 kg/h - depending material specifications Lodpfxocpg Rqo Affota More strand-Pelletizers ( ST ) ex stock Wuppertal-Germany available, ask for our most recent stock-list or visit us, you´re welcome

Condition: used, Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which measures approximately 600mm diameter x 800mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 75kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 7.5kw blower, spare knives and (1) spare screen. Unit includes control panel. Ltsdpfex Niv Tox Affsa

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Ltodjiyyc Ejpfx Affea Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Ltedpjx Niv Hofx Affja

Year of construction: 2020, condition: as good as new (ex-display), No .: 2547 1 Strand- Pelletizer Alphatec NEW Type AS-G 100 E Working width 100 mm Take-off speed up to 90 m / min Number of strands ≤ 14 Rotor Ø 200 x 100 mm with carbide cutting bars Number of teeth 32 Pressure roller Ø 120 x 100 mm Year of construction 2020 Throughput approx. ≤ 300 kg / h depending on the strand / material specifications Drive 4 kW - FU speed controlled More pelletizing units ex our stock Wuppertal-Germany available, Ltedpsgbfc Eofx Affja you´re welcome for inspection visit, date by appointment