Used Wille 345 for sale (874)

Condition: used, Year of construction: 2022, front tire size: 800/65 R32, rear tire size: 540/65 R24,

Year of construction: 1970, condition: used, pressure 63 t throat 440 mm stroke 8-100 mm no. of strokes 65 Hub/min ram - range of adjustment 63 mm table surface area 720x750 mm ram surface 440x280 mm hole in the table Ø 240 mm table height 830 mm tool hole in ram Ø 40 mm Itjdpfx Aslp U Eqeffer weight of the machine ca. ca. 5,0 t

Condition: used, tank capacity: 1,345 l, GENERAL INFORMATION Design: suspended Remarks: 2 support lugs made of V2A (support surface oriented differently; see photos); 1 vessel is equipped with insulation (see photos); some flanges made of Fe Speed: 313 rpm Internal diameter: 1,000 mm Ijdpfx Ajxqa S Ejffstr Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,900 mm Heating/cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: propeller Mounting type: support lugs Location: Bremen Technical documentation: drawing Cylinder jacket tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,370 mm Previous application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom head tempering: half-pipe coil EQUIPMENT Outlet: Flange DN80 Note: slight residues present MATERIAL SPECIFICATION Temper system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.4 mm Agitator arrangement: eccentric in the upper head

Condition: good (used), Servo motor, electric motor, DC motor Itedpfx Afjb A R D Iefer -Max. speed: 3455 rpm -Power: 3.9 kW 120 Hz -Torque: 10.8 Nm -External fan -Shaft: Ø 11 mm -Weight: 2 kg

Condition: used, Hotrunner controlunit PSG 12 12 units 230 Volt Ijdpfxjwgb Tro Affjtr price: 2.850 € contact: Mr. Rainer Eckerle

Condition: used, tank capacity: 1,345 l, GENERAL Design: Suspended Remarks: 2 support lugs made of V2A stainless steel (bearing surface inverted; see photos); some flanges made of Fe; heating connections cut off; minor sheet metal cutouts on the insulation jacket Speed: 313 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX guidelines under local conditions must be verified) Total height: 2,950 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Itsdpfx Afoxqa N Refer Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: Propeller Support type: support lugs Location: Bremen Cylinder tempering: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,360 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Base tempering: half-pipe coil INSULATION Insulation jacket material: aluminium EQUIPMENT Outlet: flange DN80 Note: slight residues, pressure marks on the insulation jacket MATERIAL COMPOSITION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage Volt: 220/380 Volt Agitator arrangement: eccentric in the top cover

Condition: used, Year of construction: 2002, turning diameter 570 mm turning length 3000 mm control SIN 810 D turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 Iedpsx I Sdqjfx Affetr spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 7,50 x 2,10 x 2,00 m ManualTurn Version: V05.03.09 4-station turret SAUTER with various cartridges 3-jaw Schunk SCHUNK ROTA-S plus 2.0 Ø315-92 Tailstock Drill rod bore 100mm Fixed steady rest Ø315mm Chip conveyor bmf Bürener (new in 2025) with coolant pump Machine light

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm Itodjx I Ir Repfx Affjr tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: good (used), electric motor, three-phase motor -Manufacturer: Artho -Type: HU90L4 -Power: 1.5 kW -Speed: 1390 rpm -Shaft: Ø 24 x 50 mm -Design: B5 Itjdpfx Afjgbf U Isfsr -Dimensions: 345/178/H225 mm -Weight: 18 kg

Condition: used, Year of construction: 2002, Liftlux SL153-18 E2 scissor lift, * Working height 19.2 m * Platform height 17.2 m * Basket load 750 kg * Weight 9400 kg * Dimensions (LxWxH) 4800 x 1850 x 3450 mm, without railing 2800 mm * 48 volt electric drive with integrated charger * 2 speed levels * Tire size 28x9-15 * Tread depth 17-21 mm * Wheelbase 3150 mm * Wheel formula 4x2 * Basket dimensions (LxWxH) 4280 (+1800) x 1430 x 1100 mm * Foldable railing * Platform hydr. extendable, 1800 mm * Basket and floor control ---- This description does not constitute a binding offer and may contain errors. No guarantee for all details. Please also visit our homepage Itjdpfx Aox Iy Eioffer

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm Ijdpfx Afex Iwgqsfstr surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Itsdpsu R S Akefx Affer Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Iedsx Ih Rtspfx Affstr Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Isdpfsg Dgr Hex Affstr Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Underfloor pull circular saw, crosscut saw, pull saw, chop saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit can be swiveled 45°, on a mobile base frame -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 260 mm, (max. Ø 300 mm) -Max. Cutting height 75 mm (max. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° Itsdpfxopyk Nij Affsr -Dimensions 930/855/H1420 mm -Weight: 182 kg

Condition: ready for operation (used), Hitachi Seiki tool turret 5-fold , Ø 50 cm , mounting plate: 235 x 345 mm , Ø hole for tool holders: 40 mm ,used, normal signs of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itedpoi Ea Nmefx Affor

Condition: good (used), Year of construction: 2008, fuel type: electric, Weights Empty weight: 7.345 kg Functional Mast: articulated arm Lifting capacity: 255 kg Working height: 1.697 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 984 m Max swing of arm in degrees: 355 Transport dimensions (LxWxH): 6,45x1,5x1,99 Production country: UK Additional information Please contact Christian Theißen for more information Manufacturer: Nifty Lift Itedpfx Asx H Rnxjffor Model: HR17NE Year of build: 2008 Condition: Used Data: Max. working height: 16,97 m Platform height: 14,97 m Max. reach: 9,84 m Platform lifting capacity: 255 kg Platform dimensions LxW: 1,48 x 0,84 m Swivel range: 355° Overhang: 0,03 m Max. climbing capacity: 25% Total dimensions LxWxH: 6,45 x 1,50 x 1,99 m Movable up to working height: 16,10 m Ground clearance: 0,13 m Drive type: Batterie Length of transport position: 4,95 m Height transport position: 2,02 m Own weight: 7.345 kg Special features: white tires, swivel work basket 2x 90°, boom arm/vertical rotation angle 140°, tandem operation, anchorage points for PPE available. Location: 41468 Neuss immediately available

Condition: used, mileage: 45,650 km, power: 90 kW (122.37 HP), first registration: 04/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2025, gearing type: mechanical, number of seats: 3, total length: 6,750 mm, total width: 2,100 mm, total height: 2,750 mm, Year of construction: 2014, Equipment: ABS, central locking, 3.5t Renault Maxity truck-mounted aerial work platform with Multitel 160 ALU DS Self-propelled work machine, * Body - Multitel 160 ALU DS, * First registered 03/2014, * Mileage 45,650 km and 3,545 hours as read, * Max. working height 16 m, * Platform height 14 m, * Max. lateral reach 9.9 m, * 2 telescopic booms + jib - aluminum construction, * Powered by a 4-cylinder diesel engine with 90 kW / 122 hp, * Displacement 3,600 cc, * Manual 5-speed transmission, Itedev Rugnspfx Affor * Single cab with 2 seats, * Tire size 195/70 R 15C, profile 5-7 mm, * Wheelbase 3,450 mm, * Wheel configuration 4x2, * Overall dimensions in length x width x Height: 6750 x 2100 x 2750 mm, * Total weight: 3500 kg, * Basket load: 200 kg, * Basket dimensions (length x width x height): 1340 x 640 x 1100 mm, * Hydraulic 4-point outriggers, * Outrigger dimensions (length: 3450 mm, width: 2100 mm, * 230 V in the basket, rotatable basket, basket and ground controls, * ABS, PTO, remote start/stop, rotating beacon, spare wheel, power steering, Further specifications and additional images are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Please also visit our website.

Condition: good (used), power: 329 kW (447.31 HP), fuel type: diesel, color: yellow, axle configuration: 6x6, Year of construction: 2014, operating hours: 13,604 h, Equipment: air conditioning, all wheel drive, Drivetrain AdBlue system: Yes Make of engine: D13J Weights Empty weight: 29.200 kg Functional Cargo space capacity: 22.000 l CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: VCE0A35GTE0340078 Other information Max. working load: 34500 kg Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,18x3,221x3,547 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information Iedjx H Auqspfx Affjtr

Condition: used, Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!) Itjdpfjwqr R Asx Affor

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Siemens servomotor type 1 FT5062-OAF01-2-Z with Heidenhain rotary encoder -Speed: 3000 rpm -Voltage: 150 V -Shaft: Ø 19 x 40 mm Itjdehu Hw Rjpfx Affsr -Rotary encoder: Heidenhain ROD 456 - 500 -Number: 2 motors available -Price: per piece -Dimensions: 345/116/H165 mm -Weight: 7.3 kg/pc.

Condition: new, Festo DSL-32-25-270-P-S2-CC swivel linear unit 163100, with 2 shock absorbers YSR-8-8-C / 34571, with 2 proximity switches 150387, unused, 100% functional Itsdji D U I Uspfx Affjr

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: Itedpfsw Rdybjx Affer • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition • Mechanism operates smoothly and easily • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Isdjwkr Afepfx Affjtr -Manufacturer: KEB, spur gear motor type G 1.2 C DK 63 G 4 /TS140 -Speed: 36 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 345/125/H185 mm -Weight: 12.3 kg

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-JD-1-B/110-A servo motor Part No. 223455 SN: MAC090-59923, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Iedslmta Eopfx Affetr