Used Welding Turning Device for sale (22,843)

Condition: excellent (used), Water-cooled, pneumatically operated spot welding gun Fanikat DALEX Type A 3139-S3 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 9.5 kA Electrode force: 300 daN Arm spacing: 120 mm Arm reach: 250 mm With double-stroke mechanism – long stroke 52 mm – short stroke 27 mm Mains voltage: 400 V 50 Hz Protection: 16 A Mounted on a mobile ergonomic handling system KAROSTAR Weightless operation – length and height adjustable via articulated joints With cooling unit and integrated synchronous control unit R15 Z From a training facility Very good condition Extensive range of water-cooled electrode arms available Bwedoxfrv Sopfx Acyew

Condition: ready for operation (used), Herrmann HIQ Dialog 1200 SpeedControl Ultrasonic Welding Machine Generator rated power: 1200W Operating hours: 8704 h Ultrasonic active operating hours: 3 h Weldings performed: 61680 Year of manufacture: 2010 Cylinder diameter: 32mm Piston rod diameter: 12mm Cylinder stroke: 100mm You are welcome to visit us for a viewing. Bwodpfx Aewcb Diocyjw We can arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table Bwedpjvmrf Tofx Acyow -Handover: in current condition as viewed -Condition: without drive motors / control, see photos -Welding rotating device: pivoting -Turntable: Ø 700 mm -Projection: 930 mm -Transport dimensions: 1240/730/H1640 mm -Weight: 643 kg

Year of construction: 1988, condition: good (used), machine/vehicle number: D 206089, OFFER 15106 Technical data: Bodpfehcwzajx Acyjww - Total payload driven + travelling unit 60000 kg. - Payload per container device 30000 kg - workpiece diameter 500 - 4000 mm - Centre distance of the support rollers mot. adjustable - roller diameter 500 mm - roller width 470 mm - infinitely variable rotation speed 100 - 1500 mm/min - torque 5132 Nm - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on guide rails and can be manually - can be moved manually in parallel - Space requirement for attached unit approx. W 2800 x H 1200 x D 1600 mm - Space requirement with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight attached unit approx. 4800 kg - Weight with running unit approx. 3800 kg

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Bwedpfx Acov Sag Neysw

Condition: good (used), Year of construction: 2019, functionality: fully functional, turning roll, roller bed for400t max. load and workpiece diameter 1.000-9.000mm. Steel-wheels. Consisting of 1x drive unit, 1x idler unit and 4x fit-up units (hydraulic) Bwedpfx Acsuf R Iloyew availible also for renting

Condition: new, Year of construction: 2025, functionality: fully functional, LMH-3000 – Industrial Laser Welding Machine – 3000 W Fiber Laser – 4-in-1 Description The LMH-3000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single unit. Bjdpfx Ajxc Ec Tocyoww Building on the proven LMH-1500, the LMH-3000 offers even more power and flexibility with its 3000 W laser source – ideal for thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling system, and ergonomic handheld operation, this machine is perfectly suited for continuous 24/7 industrial use. Technical Specifications Model: LMH-3000 (4-in-1) Laser Source: 3000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber laser Functions: Welding, cutting, brazing, surface treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets, and more Energy Efficiency: Up to 80% savings compared to conventional processes Operation: Ergonomic handheld operation with optional wire feeder Advantages 4-in-1 functionality – versatile applications Higher output (3000 W) for maximum welding speed and material thickness CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal reworking Robust design for industrial applications Flexible use in metal construction, manufacturing, and maintenance Special Notes Available immediately from stock in Rheda-Wiedenbrück, Germany. Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Introduction to operation and application available by appointment. Extras & Accessories Wire feed system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts – ideal for workshops, mechanical engineering, metal construction, body shops, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Via freight forwarding (pallet shipping) within Germany and the EU – shipping costs upon request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and receive ready-to-use delivery!

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Adjustable speed on motor. Can run automatically with signal to welder. Can run 1 lap or continuously. Max workpiece length 1600 mm. Can be extended very easily. Bsdpfx Acjhwhnyeyeww Transport can be arranged. I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. I also have welders in different sizes and types.

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device Bsdpfx Aswx Ed Secyeww -Container turning device: Welding turning device on rail chassis -Drive motor: kW -Load capacity: 45,000 kg -Drive bearing: Installation dimensions 3860/3000/H1300 mm / 6900 kg -Counter bearing: Installation dimensions 3630/2570/H1300 mm / 3400 kg -Unwinding speed: m/min right/left running -Control unit: with hand control and foot pedal -Rail width: 2000 mm -Individual components: see photos -Transport dimensions: 7500/2700/H1300 mm -Weight: 10300 kg

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run Bwsdpfx Aohcnhmjcysw - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: refurbished (used), Index ER 25 Bjdpfxofc Rmcs Acysww Long turning device GT 2351.1300 3 pieces in stock

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable Bwedpfx Aed N E Rvscyjw - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: ready for operation (used), Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible. Bedsu N Hc Aepfx Acyeww

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis Bedpowyag Djfx Acyeww -Drive motor: kW -Load capacity: 60,000 kg -Drive bearing: Installation dimensions 3830/3000/H1300 mm / 7000 kg -Counter bearing: Installation dimensions 3540/2760/H1300 mm / 4200 kg -Unwinding speed: m/min right/left running -Control unit: with hand control and foot pedal -Rail width: 1990 mm -Individual components: see photos -Transport dimensions: 7400/2760/H1300 mm -Weight: 11200 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Lg.No. 21392 Technical data approx: - Total payload driven + travelling unit 25000 kg - payload per container device 12500 kg - workpiece diameter approx. 500 - 4000 mm - center distance of the support rollers adjustable - roller diameter 400 mm - roller width 120 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run - drive 400 V - space requirement attached unit approx. W 3500 x H 850 x D 1000 mm - space requirement with running unit approx. W 2700 x H 850 x D 800 mm Bsdsk Eatdopfx Acyoww - Weight of driven unit approx. 1300 kg - Weight with running unit approx. 900 kg

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Bwjdpjpy Uzyofx Acyow Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: ready for operation (used), Year of construction: 2022, Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. Bwjdpfxerwzruj Acyew

Year of construction: 1980, condition: good (used), Offer 15107 Bsdpfx Acokqxn Djyeww Technical data: - Total payload driven + travelling unit 60000 kg. - payload per container unit 30000 kg - workpiece diameter 500 - 4000 mm - Adjustable center distance of the support rollers - Support rollers made of steel - roller diameter 650 mm - roller width 200 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run - drive 400 V - space requirement attached unit approx. W 5100 x H 1000 x D 1500 mm - space requirement with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight of driven unit approx. 4500 kg - Weight with running unit approx. 3300 kg

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function Bwedpfedzql Ssx Acysw - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable Bodpfxenwmt Io Acyoww - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Bwsdedzqacspfx Acyow Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Year of construction: 1986, condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 16059, Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm Bedpfxed Nauij Acysww -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle Bsdpfxedzqa Hj Acyjww 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: good (used), Year of construction: 1991, machine/vehicle number: D 206806, Offer 25076 Technical specifications: - Driven unit, fixed + guided unit, movable on rails - Total load capacity 3000 kg - Load capacity per container device 1500 kg - Container diameter 100 - 2500 mm - Adjustment of the container diameter - By pivoting the support arms, locked with locking pins - Roller diameter 250 mm - Continuously adjustable rotation speed approx. 60 - 1200 mm/min Bedjv Srgzopfx Acysww - Min. distance / max. distance between fixed and movable unit - 1090 / 3200 mm - Separate control cabinet - 400 V drive - Space requirement approx. W 4300 x H 900 x D 1600 mm - Total weight approx. 1200 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Lg.No. 14154 Technical data approx: Bodpfxok H D I As Acyoww - Total payload 2000 kg - Load capacity per container device 1000 kg - Support rollers made of steel - center distance of the support rollers 130 - 580 mm - center distance left + right adjustable in 6 rasters - roller diameter 80 mm - roller width 120 mm - height adjustable working height by threaded spindle - min. / max. working height 650 / 950 mm - space requirement approx. W 750 x H 950 x D 650 mm - weight each approx. 120 kg