Used Welding Table for sale (20,828)

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. Lrjdpjxaatnjfx Ad Nog - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 160 horizontal kg. Lredjxabm Nspfx Ad Nog table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components Lsdpew U U R Eefx Ad Nerg - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: used, Standard foot for welding table, table foot, table foot for welding table welding and assembly tables, support foot Lrjdpfot Trx Nsx Ad Njg -Standard foot: Support foot for welding and assembly tables -Height: finely adjustable -Quantity: 20x table base available -Price per piece -Total dimensions: 670/100/100 mm -Weight: 7.6 kg/piece

Condition: used, Standard base for welding table, table base, table base for welding tableWelding and assembly tables Ljdpfx Adjt Hy T Ij Nsrg -Manufacturer: Demmeler, standard foot for welding table 2 pieces -Type: 3-D -Pendulum feet: finely adjustable -Mounting countersunk screw: M24 -Price/Delivery: complete -Total dimensions: Ø 90 / 635 mm -Weight: 8.1 kg/piece

Condition: used, Accessory trolley for welding table, 3D welding and assembly tables Lodpjc H S D Rsfx Ad Norg -with: shelves for the accessories -Number: 1x tables available -Price: per piece -Dimensions: 1060/650/H1260 mm -Weight: 52 kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 205891, Offer 25396 Technical Specifications: - Load capacity: 250 kg - Faceplate diameter: 600 mm - Table height in horizontal position: 910 mm - Faceplate continuously tiltable by hand crank - Faceplate rotational speed electrically variable: 0.2 – 2 rpm - Welding current transmission: 300 A - Drive: 220 V - Right and left rotation Lsdpfx Ajx Tqblod Njrg - Electric foot switch - Space requirement: approx. W 800 x H 910 x D 1,200 mm - Weight: approx. 150 kg

Condition: used, Year of construction: 2006, Technical details: table load: 2,2 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm Ljdpeu Nkx Isfx Ad Nsrg machine weight approx.: 12000 kg connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: used, Year of construction: 2004, Technical details: table length: 4000 mm table width: 2000 mm Max. sheet thickness: 100 mm table height over floor: ca. 860 mm total wight: 5,6 + 0,5 t dimensions LxWxH: 4,0 x 2,2 x 0,1 m Welding table / Pricing 0.50 EUR/kg Lodpfeu Nkxuex Ad Nsrg with substructure and 6 base stands *

Condition: new, Year of construction: 2025, Device description Welding tables in system 16 allow the use of many additional accessories, such as: screw clamps ratchet clamps mounting columns widening feet locking pins bumpers angular handles Front part is made of thick, 4 mm thick galvanized steel. The primary purpose is welding aluminum, stainless steel or carbon steel from thin and thick-walled profiles. The solid device structure allows not only welding table use, but also locksmithing and repairs with the use of physical force. Lredpjwwq U Tsfx Ad Njg Parameters Dimensions (LxWxH) 915 x 460 x 885 mm Shelf height 310 mm Holes Ø16 spacing 100 x 100 mm - 45 pcs Lifting capacity 540kg TOP THICKNESS 4 mm Manufacturer: Cormak

Condition: used, Year of construction: 2011, input voltage: 400 V, input current: 32 A, type of input current: three-phase, Equipment: documentation/manual, We are offering this used robotic welding cell with 2 manual turntables, year of manufacture 2011. 1x KUKA welding robot KR 16L6 with two HDP200 manual turntables. The system is installed but no longer in use. Sale from site as seen. Type: RWS 1100 / 2×HDW Serial number: 09.09.594.000.000 Year of manufacture: 03/2011 Power rating: 36.8 kVA Nominal voltage: 3×400 V Lodpfx Aox Tab Ied Norg Nominal current: 32 A Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, load capacity: 3,000 kg, Top quality made from high-strength structural steel Q355, including plasma nitriding and scaling. 3D perforated table 2400 x 1200 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Machined flat, very robust, weight approx. 950 kg. With table leg adjustable in 4 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. Lrsdex Nih Nepfx Ad Nog

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding turntable KT 300 Horizontal load 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Table diameter 450mm Height 500mm Lrsdjc Ug Tlspfx Ad Njg Infinitely variable tilt range via crank gear motor 0 - 90° Speed 0.3 to 2.5 rpm Incl. foot remote control Surcharge: Quick-release jaw chuck Diameter 300mm, 450.-€

Condition: used, Jaw chuck different versions from 300mm to 500mm Ljdpfx Aob I Sdxjd Norg

Year of construction: 2022, condition: as good as new (ex-display), Welding rotary table Protec KT 1200 Kg Motor infinitely variable swivel and speed adjustable Motor 0,75 KW with remote control Foot switch Table diameter 1200mm height 1000mm Ledpfx Ajcrmyfjd Nerg length 1400mm width 1500mm Speed from 0,05 to 0,5 rpm

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm diameter of the clamping disk 2000mm Lodpjk S D N Ejfx Ad Norg length 3250mm, width 1780mm speed from 0,05 to approx. 0,6 rpm.

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation Lredpfx Ael Dwnlsd Njg to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€

Condition: new, Year of construction: 2022, Protec welding rotary table 10000 Kg load capacity Speed infinitely variable 0,05 - 0,5 rpm hand and foot remote control height 650mm diameter 1800mm Lodpfod An Aijx Ad Nsrg

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm height min. 0,65m, max. 1,530m Lrsdsd D D Hlspfx Ad Nsg speed from 0,01 - 1,1 rpm inclination up to 135 hand and foot remote control with speed indicator very robust

Condition: like new (used), Year of construction: 2018, Rated Loading: 3000 Kg Ljdpsdt Rhgefx Ad Nerg Rotating speed: 0,05 ~ 0,6 U/min Tilting speed: 0,5 rpm Worktable size: 1200mm Tilting angle: 0~120° Rotating Power: 1,5 Kw Hydraulik Motor Power: 3 KW Speed adjusting way: VFD Worktable height: 960mm ~ 1910mm Hydraulik system pressure 10 MPa

Condition: new, Year of construction: 2024, load capacity: 6,000 kg, Equipment: foot remote control, Welding turntable, tank turning device 6000 Kg load capacity with hand and foot remote control Diameter from 160mm to 4000 mm Drive rollers diameter 300mm Dimensions: length 1900mm x width 470mm x height 390mm Speed stepless 50 - 2000 mm / min. Lodpfogfql Ajx Ad Nerg Motor AC 380 V

Condition: new, Year of construction: 2024, Welding rotary table 500 Kg load capacity with hand and foot remote control diameter 690 mm Bore 100mm height 580mm speed stepless 0,15 - 2,0 rpm Motor AC 380 V Lodpjgfv Sksfx Ad Nsrg

Condition: new, Year of construction: 2025, 1000 Kg load capacity welding rotary table adjustable in height with through hole 200mm plate diameter 900mm height horizontal min. 0,8m, max. 1,6m height tilted min. 0,6m, max. 1,4m speed from 0,1 - 1,2 rpm Lsdef Ezdcspfx Ad Njrg length 2000mm width 1000mm Inclination up to 135 hand and double - foot remote control with speed indicator very robust

Condition: excellent (used), Welding rotary table 2 tons load capacity Lredpfxsgytcls Ad Neg with hand and foot remote control speed and inclination infinitely variable good condition, machine is robust and indestructible height tilted to middle 1,05 meter height horizontal 1,3 meter diameter 1,3 meter length 2,2 meter width 1,4 meter Speed from 0.01 rpm to approx. 1.0 rpm

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Equipment: foot remote control, 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400mm Inclination up to 120° Lsdov En U Ispfx Ad Norg Height horizontal 1300mm, tilted to the middle 1050mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and double foot remote control