Used Welding Table for sale (20,413)

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Torque 5180 N-m Bodpfjwih Dcjx Amrjwu 2 to 10-Ton Capacity Available Upon Request

Condition: used, Year of construction: 1998, machine/vehicle number: B 1 - 151, Item No. 26242 Technical data: - Max. load capacity 100 kg - Faceplate diameter 300 mm - Through spindle bore 65 mm - Faceplate can be swiveled 0 - 90° - Table height in horizontal position 720 mm - Rotational speed, electrically adjustable 0.2 - 6.0 1/min - Right - and Left-hand operation - E - Foot pedal - Welding current transmission approx. 400 A - Power supply 230 V - Table height in horizontal position 1050 mm - 3-jaw chuck with handwheel for opening and closing 250 mm - Space required approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg Bwodpfxozzpt Hj Amrju

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Bsdpepk Iv Uefx Amrswu Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min max. torque on the faceplate 900 Nm welding current 500 Ampere total power requirement 0,75 + 0,75 kW Bodpevn Uwujfx Amrjwu weight of the machine ca. 0,8 t Welding rotary tilting table - Remote control with cable - 2 x welding current transmission

Year of construction: 2019, condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable Bjdpfx Ajd A Et Hemrowu Speed continuously adjustable from 0.05 to 0.7 rpm Turntable diameter 1200 mm Tilting up to 120° Height adjustment from 1450 mm to 2050 mm Handheld and foot-operated remote control

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 910718, 1 Cloos workpiece positioning unit, swivel and rotary device, with a protective screen in the center of the table. 2x2m distance between centers, center height 1300mm, 180° swivel unit type GR502, motorized. Two rotary devices with opposing supports are mounted on the platform of the rotary table. The drive side of the rotary device is designed as in type WPV-DP-5000 N. Load capacity per rotary device approx. 500kg. Was mounted on a Cloos welding robot ROMAT 76 S with Rotrol control, manufactured in 1990. Bwodpjzkvarsfx Amrju No exchange, return, or warranty possible.

Condition: good (used), Welding rotary table KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220 V, 50 Hz Table diameter: 450 mm Bwsdpfjb Am Tgex Amreu Height: 500 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot-operated remote control Optional extra: Quick-change chuck Diameter 300 mm, €450.00

Condition: new, table load 110 Kg table load capacity 55 kg. vertikal table diameter 250 mm hollow spindle diameter 65 mm chucking diameter 200 mm swivelling range Grad Bwodpfxjulbc Uo Amrou turning speeds 0 - 8 stufenlos U/min total power requirement 0,15 KW weight of the machine ca. 65 Kg dimensions of the machine ca. 0,5 x 0,53 x 0,6 m Welding turntable with - large passage mm - Footswitch - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission - Bore in faceplate mm. Demonstration machine documentation only in English.

Condition: used, Year of construction: 2004, Technical details: table length: 4000 mm table width: 2000 mm Max. sheet thickness: 100 mm table height over floor: ca. 860 mm total wight: 5,6 + 0,5 t dimensions LxWxH: 4,0 x 2,2 x 0,1 m Welding table / Pricing 0.50 EUR/kg with substructure and 6 base stands Bwsdou Nkxuepfx Amreu *

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Bodpjzzd Uxofx Amrswu Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet

Condition: new, Year of construction: 2026, load capacity: 2,000 kg, Column Lifting Rotating Device with 2-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Movements Load Capacity 2000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Bedswihxaopfx Amrowu Drive Motor Torque 3100 N-m Clamping Plate Diameter 500 mm Rotating Motion 0.55 kW 2 to 10-Ton Capacity Available Upon Request

Condition: new, table length 1200 mm table width 800 mm table height 840 - 890 mm weight of the machine ca. 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Bsdsih D Apopfx Amrjwu Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 2000 mm table width 1000 mm table height 920 - 1000 mm Bwedpfx Ajvu Hahjmrju 2000 kg height of stroke max. 1525 mm total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: like new (used), Year of construction: 2006, 2000 kg load capacity Rotating device, self-supporting, with brake for jig and tool construction for assembly, welding, painting, etc. with foot-operated remote control can be switched between right and left Bjdpfohwv R Dox Amrswu with clamping bracket for raising by approx. 1000 mm Machine is in technically new condition, almost unused Dimensions: Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacity from 500 kg to 5000 kg.

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet Bodpfxszzd Tue Amrowu

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t Bwodoyv I Hwjpfx Amreu dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Year of construction: 2017, condition: excellent (used), 100 kg load capacity, rotating welding table Speed range from 0.12 to 1.2 RPM Bjdpfxedt Rhae Amrswu Plate diameter 400 mm Tilt angle infinitely adjustable Includes foot-operated remote control

Condition: new, number 10 Positionen weight 30 kg condition neu 28 mm 5 screw clamps Bjdpfx Amsxwzfaorjwu Thrust length 155 mm Length 300 mm Condition: new Hole diameter 28 mm

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. Bjdpfx Aeyq St Nemrowu The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Special price promotion 2000.-€ discount Perforated table 1200 x 2400 x 200mm Thickness of the table top 20 mm, diameter of the holes 28 mm Swivel range 360 Height adjustment Hydraulic motor 800 to 1200mm Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Bsdpfxjuua Ins Amrewu Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min Bedpfx Amex Urqwjrowu 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm Bwedpfx Amezxcmhsreu EQUIPMENT 4x 3D angle – 300 mm 6x Stop – 150 mm 6x Stop – 225 mm 1x Protractor 2x Prism 1x Eccentric 1x Flat angle 12x Clamping/tensioning screw 12x Clamp

Year of construction: 2015, condition: used, Container rotating device, welding table, welding rotating table, roller stand 1000 kg load capacity with foot-operated remote control Speed continuously adjustable, 80 to 1600 mm/min. Bwodpfx Amec Ny H Ajreu Diameter: 20 mm to 700 mm

Condition: used, Year of construction: 1996, machine/vehicle number: 354-0, Offer 26036 Approximate technical data: - Load capacity approx. 3000 kg - Platen diameter 1520 mm - Platen can be tilted by motor - Rotational movement can be continuously adjusted electrically - Welding current transmission 650 A Bwjdpez Df Hfofx Amrsu - Power supply 400 V - Table height in horizontal position approx. 1450 mm - Right and left rotation - Hand-held remote control - Foot switch - Space requirement approx. W 1700 x H 1500 x D 2300 mm - Weight approx. 2800 kg

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg Bwodpfx Amjymf Rtjreu • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table