Used Welding Table for sale (20,537)

Condition: good (used), Container rotating device, Protec Welding Technology Nledpfxec Ny S Ns Ad Ssc 1000 kg load capacity with foot-operated remote control Speed of 80 - 1600 mm/min Diameter 20 to 700 mm

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control Nljdpfxeid Szvs Ad Sec 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding turntable, 2000 kg load capacity with manual and foot-operated remote control Njdpfogfqk Tox Ad Solc Diameter 1200 mm Bore diameter 100 mm Height 580 mm Variable speed 0 - 0.6 RPM AC 380 V motor

Condition: new, Year of construction: 2024, Welding rotary table, 3000 kg load capacity with hand and foot control Diameter 1400 mm Njdpfx Adsgfqlij Sjlc Bore 100 mm Height 580 mm Speed, infinitely variable, 0 - 0.6 RPM Motor, AC 380 V

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, Nsdpfxsfv Huue Ad Sjlc very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: new, Year of construction: 2024, Welding positioner KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220 V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Njdpfxsfxz Dvo Ad Sjlc Includes foot pedal remote control Additional cost: Quick-change chuck Diameter: 400 mm, €550

Condition: new, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height adjustable Load 3000 KG with load center of gravity 300mm Nlodpfot Ugm Rsx Ad Sec Handheld remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Inclination angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW Perforated plate surcharge

Condition: excellent (used), load capacity: 600 kg, Equipment: foot remote control, Welding turntable 600 kg load capacity with foot remote control Diameter of the large clamping disk 950mm Diameter of the small clamping disk 600mm Horizontal height 1070mm incl. feet (250mm) Height tilted to center 820mm incl. feet (250mm) Speed infinitely variable from 0.01 to 2 rpm Nledjtumf Ijpfx Ad Ssc Length 1200mm Width 800mm

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, 3000 kg load capacity welding turntable, very robust Nsdpfxotuqd Us Ad Solc Speed infinitely variable from 0.05 to 0.7 rpm Turntable diameter 1400mm Inclination up to 135 Height horizontal 14650mm, tilted to center 1265mm Length 2.12 m x width 1.4 m with hand remote control and double foot remote control

Condition: new, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Tilt angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW on request with original Siegmund perforated plate octagonal table plasma nitrided 1800 x 25 bore 28mm (surcharge) Nsdpfxot Sk Imo Ad Sslc

Condition: new, 3D perforated table 2400 x 1200 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, Plan machined, very solid weight approx. 950 kg With table base Price is without accessories Nsdpfxovm Dk Ij Ad Sslc

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, Various very heavy-duty welding tables, machined, partially plasma nitrided Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300; plasma nitrided €3,300 Nedpfxewu Exzj Ad Solc - 2.4 x 1.2 meters, €2,900; plasma nitrided €3,900

Condition: new, load capacity: 1,000 kg, Equipment: foot remote control, 1000 kg load capacity complete set incl. hand and double foot remote control (available from 600 kg to 10,000 kg) 3-axis weld positioner with adjustable height with through bore 200 mm table plate diameter 900 mm with T-slots, alternatively with screwed-on solid perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm height (horizontal) min. 0.65 m, max. 1.25 m height (tilted) min. 0.45 m, max. 0.95 m speed from 0.01 - 1.1 rpm tilt up to 135° hand and double foot remote control with speed display very robust price without accessories, accessories available at very competitive surcharge table plate surcharge €1,900 (only in combination with positioner) Nodpfjx Th A Hsx Ad Solc

Condition: like new (used), functionality: fully functional, overall weight: 5,860 kg, INDUSTRIAL WELDING AND FABRICATION TABLE – CNC MACHINED, HIGH FLATNESS, 5.86 TONS A professional welding and fabrication table designed for heavy-duty industrial applications, assembly, and welding of large metal structures is offered for sale via auction. A major advantage of this table is the CNC-machined tabletop across the entire work surface, a process performed to achieve high flatness, which is essential in assembly, inspection, and welding processes where precision and dimensional stability are critical. Technical specifications: Equipment type: Industrial welding and fabrication table Weight: 5.86 tons Length: 5,990 mm Njdpfszc Uwnox Ad Sjlc Width: 2,020 mm Height: 620 mm Work surface thickness: 40 mm Usable area: approx. 12 m² Machining: CNC milling for superior flatness Construction: heavy-duty, reinforced metal frame Advantages: ✔ Solid 40 mm tabletop, CNC machined for high flatness ✔ Robust industrial construction with a self-weight of 5.86 tons ✔ Excellent stability for heavy welding and assembly work ✔ Large work surface for assemblies and large structures ✔ Suitable for inspection, alignment, and positioning of metal components ✔ Ideal for metal fabrication workshops, industrial production, metal construction, and maintenance Areas of application: Industrial welding Metal construction Assembly of heavy structures Dimensional inspection and geometric control Fixing and positioning of parts before welding Manufacturing and repair of industrial machinery Commercial description: A heavy-duty industrial table built for intensive use in production environments. The 40 mm thick tabletop has been CNC-machined to achieve a highly flat surface, providing optimal conditions for the assembly and welding of complex components. Due to its self-weight of almost 6 tons and extremely rigid construction, it represents an ideal solution for industrial applications where precision, stability, and strength are essential. Professional equipment, difficult to replicate at current costs, suitable for companies in the field of metal construction, industrial production, and heavy machining.

Condition: good (used), Mobile welding table / straightening table from a vocational training center Table dimensions L x W x H: 2600 x 1600 x 920 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Nlsdezbithepfx Ad Sjc

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Nljdpetqgnyefx Ad Sec Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Condition: like new (used), Year of construction: 2025, rotary table diameter: 1,000 mm, Equipment: rotational speed infinitely variable, - Horizontal load capacity: 1200 kg - Vertical load capacity: 600 kg Nlodpfx Aezcyxqed Sec - Table dimensions: 1000 mm - Electrically tiltable - Wireless remote control - Digital display - Documentation - 400V

Condition: good (used), – Horizontal load capacity: 1000 kg – Vertical load capacity: 500 kg – Table diameter: 900 mm – Infinitely adjustable speed – Electrically tiltable Njdpfx Adozcxinj Selc – Wired remote control – 380V

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Nljdpfx Ajtk Ikmsd Sjc Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material color: sendzimir galvanized Nsdpfx Adstk Irks Selc CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Nljdstk Iwaspfx Ad Soc Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Nljdpfx Adswgicbo Sjc Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Nledpfx Aertqm Dsd Ssc Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Nljdpfx Astk Iwped Sec Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Welding table for bandsaw blades, suitable for blades up to a maximum width of 400 mm. Nodpfxod Aruxj Ad Selc