Used Welding Fume Filters for sale (11,828)

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Duedpfx Aowiuaqjiwjt Stock no.: 0986 1/2

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation Duedpfewwkvqjx Aiwst - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: excellent (used), Welding fume extraction Make: Kemper Model: Vacu Fil 500 Year of manufacture: 2/2016 Airflow: 500 m3/h Supply voltage: 400 Volt 12.9 amperes Dsdpfx Aiexk Uxaowout 5.5 kW Accessories: unused spare filter cartridge Transport dimensions: Length: 1200 mm Width: 660 mm Height: 1400 mm Weight: 250 kg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173823, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Djdpfxswq R Dbj Aiwjut Connected load: 5 kW Max. blower air flow: 580 m³/h Max. achievable negative pressure: 37,500 Pa Max. device air flow: 520 m³/h Min. air flow: 100 m³/h The Fumator Minivac 500D is a compact and reliable extraction system that efficiently removes smoke, dust, and fumes from industrial workplaces. Its space-saving design allows for easy integration into various production processes. With its innovative technology, it ensures a clean and safe working environment while remaining pleasantly quiet and low-maintenance during operation.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1010215351, overall weight: 95 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating Temperature Range: 0 – +50°C Operating Voltage: 400V/50Hz Control Voltage: 24V DC Dedpfxjwq Rvwj Aiweut Connected Load: 7.5 kW Max. Device Airflow: 750 m3/h Min. Airflow: 150 m3/h Max. Vacuum: 380 mbar The Fumator Minivac 500D is a powerful and reliable extraction system designed to effectively remove smoke, dust, and fumes from industrial work areas. Its compact design enables flexible integration into various production environments, while its efficient technology ensures a clean and safe working atmosphere.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3520173969, overall weight: 87 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5kW Max. blower air flow rate: 550 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air flow rate: 500 m3/h Min. air flow rate: 100 m3/h Dujdpfxswq Rt As Aiwet The Fumator Minivac 350D is a reliable and efficient extraction system specifically developed for the removal of smoke, dust, and fumes in industrial work environments. Thanks to its compact design, it can be flexibly used in various production sectors.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173822, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Dedpjwq Ryvofx Aiwjut Connected load: 5 kW Max. blower air volume: 580 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air volume: 520 m3/h Minimum air volume: 100 m3/h The Fumator Minivac 500D is a robust and efficient extraction system, specially designed to reliably filter smoke, dust and fumes from industrial workplaces. Thanks to its space-saving design, it can be flexibly integrated into various production environments. The advanced technology ensures a clean and safe working environment, while operation remains quiet and maintenance is minimal.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173824, overall weight: 87 kg, filter area: 10 m², Specification: Duedpfx Aewq Rzgeiwot Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air volume flow: 580 m³/h Max. achievable negative pressure: 37,500 Pa Max. device air volume flow: 520 m³/h Min. air volume flow: 100 m³/h The Fumator Minivac 500D is a powerful and reliable extraction system designed to efficiently remove smoke, dust, and fumes from industrial work areas. Its compact design allows for flexible use in various production environments. With its advanced technology, it ensures clean and safe air quality while operating quietly and requiring minimal maintenance.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Djdpfxew Hw Dgj Aiwout

Condition: good (used), functionality: fully functional, overall weight: 85 kg, SUCTION UNIT PLYMOVENT EMK 1602-H Manufacturer: PLYMOVENT Designation: EMK 1602-H Weight: approx. 85 kg Very good condition (see photos) Large castor wheels, 2 of which can be locked (simply operate with foot) Dimensions: Height 107 cm Dusdpfx Ajt Dkyteiwot width 90 cm Depth 1100 cm Offer consists of 1 piece EMK1602-H General information: We are offering items here from various company liquidations, which we describe as well as possible and provide informative photos. Further information about the item cannot be provided. We offer the opportunity to view items on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. Unless expressly described, this offer is for second-hand goods. Items have been visually inspected and are in good condition. Please note the photos Functionality performed - result ok. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. all dimensions are approximate Photos similar

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Djdpfxsv Taq Re Aiweut Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: Dusdpfx Aswn Egreiwjt - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: used, We are offering a welding fume extraction unit from the brand Euromate. Please contact us for a quote. Dedpfsxz R Aijx Aiwjut

Condition: good (used), Year of construction: 2017, functionality: unexamined, We offer this well-maintained Förster Welding Systems 4225 railing welding fixture, year 2017. Manufacturer: Förster Welding Systems Model: 4225 Year of manufacture: 2017 Condition: good Category ID: 96 Duedpfxsy N A U Ao Aiwet Type ID: 2257 Machine type: railing welding fixture If you have any questions or need more information, feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 Dusdpfjv Uzf Eox Aiwjt - Rexroth hydraulics - German user interface - CE Upon request, this machine can also be converted for many other welding tasks.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Dujdpfxoxfrv Eo Aiwst Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: not inspected (used), functionality: unexamined, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the items within the period from 23/06/2026 to 26/06/2026! Auction of an ELEKTRA BECKUM electrode welding machine & an oxy-fuel welding unit! MACHINE DETAILS Dujdoy D Nqaopfx Aiwst Dimensions (L x W x H): 1,100 x 800 x 1,000 mm Weight: 150 kg Note: The gas cylinders pictured are not included in the scope of delivery. External reference: 17

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” Dedpfx Aey Efmgjiwjut All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Duodpfx Aieytm Tijwot

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Duodpjurlcrsfx Aiwet Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: not inspected (used), functionality: unexamined, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 1,500 kg, hole diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Number of holes: 800 Hole diameter: 16 mm MACHINE DETAILS Dimensions & Weight Djdpfx Aieym Rytewout Dimensions (L x W x H): 2,000 x 1,000 x 860 mm Weight: 1,500 kg EQUIPMENT Lot clamping devices External reference: CES - Lot 91

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Duodpfxjfvqmxo Aiwjt

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Dusdpfx Aien Sl D Rowet

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods Dodsyaw Hajpfx Aiwsut TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. ERNiCrMo-3, ERNiCrMo-4, etc.

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To Dusdpfx Aiexbhrhswst 3,000 kg load capacity welding positioner, complete set Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Height horizontal: 1,450 mm, tilted to center: 1,200 mm Length: 2.0 m x Width: 2.0 m Hand-held remote control with digital display and foot remote control