Used Welding Extraction for sale (9,548)

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Kedszd Rmgspfx Abzjnb Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Knedpoxw R Nnjfx Abzeb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,500 kg, Professional grinding table, scissor type with built-in fume and dust extraction. Used in grinding, polishing, soldering, welding and cleaning processes with hand tools. Built-in metal pre-filter, which separates coarse dust particles, metal filings and is designed to capture sparks so that they do not get into the filter (spark catcher). Electrically lifted table. Table equipped with rollers and pneumatic connections for connecting tools. New filter inserts have been installed in the extractor. Built-in table lighting. Device in very good condition. Kjdpfsv Tbaaex Abzsnb Parameters: Extraction capacity - 3000 m3/h Negative pressure - 2400 Pa Year of manufacture - 2011 Work table width - 1.90m Work table depth - 0.80m Overall dimensions: Work table: Length - 2.10m Depth - 1.40m Height - 2.30m Extraction: Length - 1.20m Width -1.00m Height - 2.35m Total weight - 1500 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system Ksdpfx Aezukp Aebzjnb -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15, total width: 2,210 mm, total length: 2,333 mm, total height: 2,200 mm, overall weight: 700 kg, type of input current: three-phase, input voltage: 400 V, The DCSF-135 2W brush sanding machine features a welded frame, housing two independently moving frames. Each frame supports two sanding spindles, constructed from cylindrical base segments with grooves for inserting brushes made of soft abrasive cloth and agave fibers. These spindles can swivel up to 15°. The spindles are driven by electric motors via gear elements. The sanding rollers are belt-driven, with their rotational speed regulated by frequency inverters. The sanding units are suspended in pairs on independent lifting systems. The lifting system consists of four trapezoidal screws, driven by a geared motor via a chain drive. Each spindle is equipped with a separate dust extraction unit that effectively captures dust generated during sanding. A conveyor table with a rubber belt is mounted on four supports below the sanding spindles, and includes a feed mechanism. The conveyor table is a vacuum table. The vacuum chamber of the table is connected to a radial fan located underneath the table via two flexible hoses. At the rear of the machine, a turbo blower is located to clean the workpiece after the sanding process. All electrical components are installed in a separate control cabinet at the front of the machine, with the operator panel located on the left-hand door. The DCSF135 2W wide-belt sanding machine can be adapted for use in a production line. Machines designed for this purpose are equipped with operator panels angled towards the conveyor belt feed direction, allowing operation during continuous processing or when the table is long from the infeed side. The rubber rollers on the table, located near the geared motor, are driven by elastomer belts. When the machine operates in a 1+1 line (two machines in series), it can be equipped with an infeed/outfeed conveyor with its own drive (MRT 50 geared motor, i=15, n=93 with an 800 mm conveyor length*). Power is transmitted from the geared motor to the rubber rollers via round elastomer belts. The length of the infeed/outfeed conveyor depends on the customer's individual needs. Technical parameters: Sanding roller with brush strips made of agave fiber (FLEX TIM) Ø290-380 x 1400 - 2 pcs Brush rotational speed 100-450 rpm Roller drive motor Sg90L-4PC 2.2 kW, 1380 rpm - 2 pcs Sanding width 1350 mm Conveyor belt CANTACT E2112 Kreisloch 57oSh;, 1350x4424, VACUUM CONTITECH (according to SSZ.00.01-135) Feed rate 3-20 m/min Conveyor drive motor Skg100L-4A 3 kW, 1415 rpm Conveyor gearbox MRT-85 i=20 n-70 Geared motor (infeed/outfeed conveyor)* MRT-50 i=15 n=93, power 0.75 kW* Lifting drive motor Skg100L-4A 0.55kW, 1390 rpm - 2 pcs Lifting gearbox MRT-60 i=56 n=25 Fan motor SKg 132S2A 5.5 kW n= 2925 rpm Ksdpfx Aboz Duicszjnb Diameter of dust extraction ducts for sanding units 1 x Ø250mm Diameter of dust extraction duct for turbo blower x Ø120mm Air requirement for brushes 2x 4000 m³/h Air requirement for turbo blower 500 m³/h Supply voltage 3 x 400 V in TN-S system Installed power (without infeed/outfeed conveyor) - 13.45 kW

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 240900085, overall weight: 410 kg, total length: 1,000 mm, total height: 2,150 mm, space requirement width: 1,350 mm, Filter and extraction unit with automatic cleaning. Suitable for fume extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 9/2024 Knedpfx Abjzww T Tjzjb Model designation: 5201053763420 Serial number: 240900085 Motor: 3 kW - 400 V Number of filter cartridges: 3 Raw gas inlet: 250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,350 x 1,000 x 2,150 mm Weight: 410 kg Note: Excluding installation, commissioning, and transport. Subject to prior sale.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, ABB WELDING BOOTH WITH ROBOTS 1. GENERAL - Manufacturer: ABB - Type: FlexArc LX2 - Dimensions: 4.6 x2.6x 2.6 m - Weight: 5200 kg - Year of construction: 2005 - Previous use: training station 2 CONSTRUCTION - Supporting frame - Metal walls - Roof with extraction spigot for connection to external ventilation - Service door with window equipped with electric security bolt - Albany Rapid Protect 320 roller door with inverter - SICK horizontal safety curtain in the loading/unloading area of the turntable - Siemens S7-300 controller - Siemens TP 170B color/5.7" touchscreen control panel - horizontal-axis swivel for mounting an instrument / tool with horizontal axis type IRBP 250 L with a load capacity of 250 kg 3. ROBOTS - Robots 2 pcs. - 1 piece welding robot - 1 piece robotic (after retrofitting can be used as welding robot) - Type: IRB 1400 - Version: M2004 Kedsvbg Ufepfx Abzjnb - Year of construction: 2005 - Serial No.: IRB1: 14-50257 IRB2: 14-50258 - Control: IRC 5 - Number of hours worked: approx.2000 - Automatic TCP measurement 4. WELDING EQUIPMENT - welding current source: MIGROB 500 (ABB) - 1 pc. - spare welding current source: LRC 430 (ESAB) - 1 pc. - wire feeder: WIRE FEED UNIT A34E - PIB ( ABB) - 1 pc. - cooler: OCE 2H (ESAB) - welding torch cleaning device TC96 - 1 pc. - welding wire cutting device - 1 pc.

Condition: used, Year of construction: 2010, Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor Knjdpsrzvw Tofx Abzob -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. Knedozgaazepfx Abzsb In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Knodpfxezba E Ij Abzsb Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm EQUIPMENT 4x 3D angle – 300 mm 6x Stop – 150 mm 6x Stop – 225 mm 1x Protractor 2x Prism 1x Eccentric 1x Flat angle 12x Clamping/tensioning screw Knedezxcmhepfx Abzsb 12x Clamp

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Kodpfx Abszwxanozjnb Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: No warranty, installation, commissioning, and transport are included. Subject to prior sale.

Condition: good (used), Year of construction: 1996, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson Torit, filter system for extraction system -Type: IDFP2 -Cartridge filter: see photos -Inlet/Outlet: Ø400 mm / Ø250 mm -Extraction capacity: 2500 m³/h -Pressure: 2370 Pa -Motor power: 3 kW -Filter dimensions: 1800/1200/H1780 mm -Weight of filter: 350 kg -Blower dimensions: 600/750/H1070 mm Kodjzyt Irspfx Abzonb -Blower weight: 75 kg

Condition: good (used), ABB 2-Station Robotic Welding Cell You are bidding on a professional, fully functional 2-station robotic welding cell designed for continuous industrial use. The system is ideal for automated, highly efficient MIG/MAG welding across production runs ranging from small batches to large-scale series (e.g., in automotive or mechanical engineering). Thanks to the clever two-station design (shuttle table/parallel stations), the operator can safely load new components or unload finished workpieces on one side while the robot is actively welding on the other. System Components 1. Industrial Robot & Controller (ABB): - Robot Controller: Reliable and robust ABB S4 / S4C generation. Kodpfx Absztkb Nszonb - Programming Unit: Original ABB Teach Pendant with joystick for precise programming (teaching) of welding paths. - Auxiliary Axes: Both stations feature synchronized, motorized rotary axes (Nameplate: ABB / ELMO, Type: PS 60/4-50-P-LSS-3985) for optimal workpiece positioning (e.g., for "bathtub" or gravity-assisted welding positions). 2. Welding Technology (Carl Cloos Schweißtechnik GmbH): - Welding Power Source: Cloos GLC 503 QUINTO (High-performance 500A MIG/MAG system). - Cooling: Integrated liquid cooling (water cooling) to maximize the torch head's duty cycle. - Accessories: 2x professional WDI ECORACK bulk wire drums on wheeled trolleys, including robust wire feed conduits leading to the robot. 3. System Control & Safety: - Operator Interface (HMI): Modernized Siemens SIMATIC HMI touch panel for easy control of the entire system, part counting, and error diagnostics. - Safety: Fully enclosed safety enclosure (protective screens against UV radiation and welding spatter) including an integrated extraction system (hose assembly on the robot arm). - Inspection: The system was in industrial use until recently (certified for, among others, renowned automotive suppliers) and bears a valid DGUV Regulation 3 inspection sticker. "A one-stop solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2022, operating hours: 6,731 h, functionality: fully functional, machine/vehicle number: 20804731, type of input current: three-phase, overall weight: 1,695 kg, input voltage: 400 V, total width: 3,405 mm, total length: 3,900 mm, total height: 1,310 mm, volume flow: 29,000 m³/h, space requirement height: 1,310 mm, space requirement width: 3,405 mm, space requirement length: 3,900 mm, filter area: 540 m², suction capacity: 29,000 m³/h, compressed air connection: 4 bar, power: 45 kW (61.18 HP), input frequency: 50 Hz, transport length: 3,900 mm, transport width: 3,405 mm, Plymovent MDB-36 PRO central extraction system for welding fume and dust extraction. Year of manufacture: 2022, used. For sale is a complete central extraction system consisting of a filter unit, fan, frequency converter, piping system, extraction arms, spark arrestors, shut-off dampers, sensors and other accessories. The system will be sold as a complete package according to the scope of the offer. Technical data: - Manufacturer: Plymovent - Type: MDB-36 PRO - Year of manufacture: 2022 - Filter area: 540 m² - Extraction volume flow: approx. 29,000 m³/h - Fan power: 45 kW - Weight: approx. 1,695 kg - Dimensions: approx. 3,900 x 3,405 x 1,310 mm - Filter cartridges cleaned with compressed air - Frequency converter included Scope of supply: - MDB-36 PRO filter unit - 36 filter cartridges CART-PTFE/15 - 45 kW fan in soundproofing box - Frequency converter VFD-45 - Pressure sensor PT-2500 - 2 x SparkShield-500 spark arrestors - Piping system - 7 x KUA-160/4H extraction arms - ERC-5.8 extraction rail with support consoles Knjdpfx Ajztmw Tebzob - Automatic shut-off dampers - Switching devices and sensors - Exhaust/recirculation switchover - Louvre silencer - Other accessories according to the scope of the offer Inspection possible by appointment. The system is sold in its current condition. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. Sale in current condition. Note: The system is currently disassembled and not connected. Before being taken out of service, the system operated perfectly and without any known functional faults. An inspection is of course possible, but a demonstration under power cannot be carried out at present. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. The information on documentation and certification, operating hours and machine/vehicle number will be supplemented and provided later. If you have any questions or are interested, please send us a message. We will gladly provide further information and additional pictures upon request.

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 1,400 m³/h, arm reach: 2,000 mm, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum filter by Plymovent Knjdpfx Aoy Shb Hobzeb Model: The Smart "ONE" Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter element in very good condition. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. 1.1 kW three-phase fan Capacity up to 1400 m3/h Filtration surface: 20 m2 Wall-mounted extraction arm, 2 m length Stock number: 1135

Year of construction: 2021, condition: excellent (used), 2021 Versa Tech Enterprise Soundproof Welding Room/Acoustic Welding Enclosure Consisting of: Kodpozk Dw Eefx Abzonb 1. 1st Enclosure 3 Twin Door Soundproof Welding/Assembly Booths Dimensions (2) W3,000 x D4,000 x H2,700mm & W4,000 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 2. 2nd Enclosure 2 Assembly Soundproof Booths Dimensions W4,800 x D4,000 x H2,700mm & W2,800 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 3. 3rd Enclosure 2 Soundproof Welding/Assembly Booths Dimensions W2,500 x D2,500 x H2,700mm & W4,200 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 4. 4th Enclosure 3 Twin Door Soundproof Welding Booths Dimensions (2) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,319 x D1,284mm. 5. 5th Enclosure 6 Twin Door Soundproof Welding Booths Dimensions (5) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,119 x D1,284mm. Please see document attached for more details.

Condition: new, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, product height (max.): 800 mm, input frequency: 50 Hz, workpiece weight (max.): 40 kg, Equipment: documentation/manual, type plate available, SITEC TO800CAB1T automatic system for circumferential MIG welding with a single torch, featuring numerical control with an integrated PLC, a 7" color touchscreen, program management and storage, and provision for remote assistance and network connection. Key features: Maximum workpiece diameter: Ø 400 mm Maximum length: 800 mm Workable thickness: 2.5 mm Material: Steel (Fe) Maximum load capacity: 40 kg Welding process: MIG Motorized rotating head with variable speed, 0.3–3 rpm Rotating table, Ø 400 mm Tailstock with 150 kg thrust Automatic pneumatic lifting system 1 torch adjustment slide 1 pneumatic torch positioning system 2 rotating clamps, 500 A Fully enclosed protection cabin with internal lighting and fume extraction Complies with CE regulations Machine designed to ensure high precision, repeatability, and productivity in the circumferential welding of cylindrical parts. Ideal for industrial production and series processing. Condition: New – available for inspection and testing by appointment. Contact us for further information, photos, and pricing. Kjdpfx Abozry Tfjzonb

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 2 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 20,000 m³/h, filter area: 295 m², noise level: 75 dB, actuation type: electric, total height: 3,643 mm, total length: 2,066 mm, total width: 1,756 mm, overall weight: 1,590 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, NOVUS Airtower FT 20,000 EC – like new – only 2 operating hours Knedpjzfx Risfx Abzsb For sale is a NOVUS Airtower FT 20,000 for extracting welding fumes in industrial halls. The unit was used exclusively for testing purposes and currently has only 2 operating hours. The Airtower has been technically inspected and is in perfect working order. All features are functioning correctly. There are no damages. Equipment: * NOVUS Airtower FT 20,000 * ECblue efficiency package * NOVUS particle sensor * NOVUS lighting package * Timer * Automatic filter cleaning * 3 filter stages * Total filter area 295 m² * Dust container 200 liters * Plug & Play, no piping required * Forklift attachments and crane eyes Technical data: * Airflow rate: approx. 20,000 m³/h * Motor power: 15 kW / 400 V / 50 Hz * Dimensions: approx. 2,066 x 1,756 x 3,643 mm * Weight: approx. 1,590 kg * Sound pressure level: < 75 dB(A) A guard was removed during the testing phase and has already been reordered. This will be professionally installed before delivery. Price: €27,900 net, negotiable, plus VAT. Sale exclusively to businesses. Location: 48691 Vreden. Inspection possible by appointment. Loading can be arranged on-site.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h Knsdpfx Aezyay Ijbzjb EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic and vacuum-operated, suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Knodpjy H Hkvjfx Abzsb The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, which reduces explosion risk to a minimum. Brand: Plymovent / Euromate Model: SCS Cartridge filter elements – 2 pcs Filtration area: 150 m² Fan enclosed in a soundproof casing with noise silencer, power 7.5 kW. Fan model: CHB16LG03 Capacity up to 9,000 m³/h Inlet diameter: 400 mm Filtration efficiency: 99.8%

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Special equipment for the demonstration machine: Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Ksdpfx Abez D Eruszjnb Available for immediate delivery. While supplies last.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement. Knodpfezli Acsx Abzsb

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Knsdpfjxg Icksx Abzjb Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. Knodpezkanaefx Abzob The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us.