Used Welding Circular for sale (6,919)

Condition: good (used), functionality: fully functional, Welding positioner, height-adjustable, with a load capacity of 1000 kg with foot-operated remote control and 2 hand-held remote controls Height when tilted, min. 360 mm, horizontal 470 mm Height when tilted, max. 910 mm, horizontal 1010 mm Diameter of the table 800 mm Crodpfx As Ah Stwjiisi Center bore 200 mm Length 1800 mm Width 1100 mm

Condition: like new (used), functionality: fully functional, Welding rotary table, like new, Automa SP 2000, complete set. Horizontal height 920mm (foot height 130mm) Speed, continuously variable, from 0 - 2 rpm. Cedpfx Aio Ah Svnsieri Height when tilted 800mm Length 1300mm Width 1100mm Chuck diameter 630mm, with a set of interchangeable jaws available for an additional charge of €1200.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Codpfx Aijz Eu Syeiori Tiltable for horizontal to vertical rotation.

Year of construction: 2020, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: MHTP8, RYWAL MHTP8 Welding Rotator, Head & Tail Stock, 8 t Manufacturer: RYWAL-RHC Sp. z o.o. Type: MOST HEAD TAIL-STOCK-8t Serial number: MHTP8-011 Catalog number: MOST MHTP8 Year of manufacture: 09/2020 Load capacity: 8,000 kg Power supply: 400 V Frequency: 50 Hz Rated current: 25 A Installed power: 9 kW Machine weight: 2,300 kg Crjdpo Ahza Defx Aiioi Technical data: Maximum load capacity: 8,000 kg Rotation speed: 0.2-0.68 rpm Lifting speed: 500 mm/min Maximum torque: 24000 Nm Maximum lifting torque: 862 Nm Vertical adjustment range: 550-1880 mm Plate diameter: 750 mm Max. working diameter: 3600 mm Height: 2550 mm Width: 1000 mm Length: any For sale: MHTP rotator with an 8-ton load capacity, designed for rotating and positioning heavy parts during welding, assembly, and processing of steel structures. Its robust construction and smooth speed adjustment ensure precise and safe operation. The machine is suitable for production plants, shipyards, and companies involved in the production of steel structures. The device is in working order, and testing is possible while in operation.

Condition: used, functionality: fully functional, type of cooling: water, Equipment: documentation/manual, type plate available, The welding machine includes a Cool Midi 1800 cooling unit and a TA 24 control panel, complete with cables. It is fully functional and can be tested at our warehouse in Přerov. Crodpfxe Ah S H Hs Aiiei

Condition: used, Year of construction: 2017, operating hours: 30,000 h, 1 Bending and welding system, BMW tension strut, manufacturer: STEPP Fabrikationsautomations GmbH & Co. KG, year of manufacture: 2017, power connection: 400V, 50Hz, 200A, nominal pressure: 6 bar, dimensions (L x W x H): 10m x 6m x 2.6m, weight: approx. 16t, pneumatic components are primarily used for clamping and alignment, hydraulic drive is mainly used for direct processing, such as hole punching, 3 robots, manufacturer: Yaskawa, type: 1x YR-MH00024-A00, 2x YR-MA1440/MH12-A00, for transfer and welding operations, servo drives are used for transfer, control system: Siemens 1516-3, machine hours: 30,000, average utilization: 85%, last documented maintenance: 02/16/2024, system generally operational, rework has been carried out. Codpfx Aie Aaw U Tjisri

Condition: good (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 550 mm, overall weight: 500 kg, Pressta Eisele Profilma 501 Circular saw machine for aluminum and plastic profiles – ideal for series production with high volumes and precision requirements. Designed for 550 mm saw blades. The powerful 7.5 kW motor, in combination with the hydropneumatic saw feed (cutting from below), ensures fast and clean cuts. The cutting height is adjustable. Six pneumatic clamps (horizontal and vertical) with individually adjustable clamping pressure guarantee secure hold for delicate profiles. The stationary base frame (working height 980 mm), the manually opening protective cover, and the saw blade housing integrated under the table provide a high level of operational safety. Minimum quantity lubrication system with a 1-liter lubricant tank including level control. Max. cutting range: – Profile height: up to 140 mm – Profile width: up to 270 mm – Round material: Ø 180 mm Technical data: Cedpfoz Hzagjx Aiiori – Weight: approx. 480 kg – Dimensions (W x D x H): approx. 170 x 148 x 155 (192) cm - Year of manufacture: 2006

Condition: used, Year of construction: 2004, operating hours: 2,000 h, functionality: fully functional, input voltage: 240 V, input current: 2 A, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used Miyachi MDB-2000B spot welding machine, year 2004. Input voltage: 200–240 V Frequency: 50/60 Hz Input current: 1.5 A Codpfx Ajz S Dy Ieiieri It utilizes a polarity-reversing system, ensuring reliable performance at every welded spot. Throughout the entire welding pulse, it monitors both voltage and current, thereby minimizing undesirable effects. Selectable current ranges: 250 A, 500 A, 999 A, 3.00 kA RS-485 communication Dimensions: 172 x 423 x 270 mm Weight: 19 kg Power consumption: maximum 300 W The system also includes two mechanical setups for battery welding (see photos). They consist of frame with pneumatic drives and necessary end switches for proper triggering of operation. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2023, TEKA welding fume extraction system Model VACCUBE 30 used Year of manufacture: 2023 Power: 3.0 kW Current consumption: 7.2 A Connection voltage: 400 V / 50 Hz Max. capacity: 320 m³/h Max. pressure: 27000 PA Filter area: 8.16 m² PTFE Sound level: 68 d(B)A Weight: 125 kg Csdo Ah Drvepfx Aiisri

Condition: used, Year of construction: 2009, machine/vehicle number: 3122 102 024, functionality: fully functional, operating hours: 24,000 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: DC, cutting height (max.): 150 mm, cutting width (max.): 150 mm, control type: NC control, pivoting range: 60 °, actuation type: electric, total height: 1,880 mm, total length: 3,270 mm, total width: 1,200 mm, overall weight: 2,500 kg, table height: 1,050 mm, Equipment: CE marking, documentation/manual, lighting, Description This KASTO KASTOflex F metal cutting circular saw was manufactured in 2009. It weighs 2500 kg, operates on 400 V, and features automatic feed, a scrap collection bin, and a coolant system. It can perform straight and miter cuts up to +/- 60°. The machine was in operation until two weeks ago (October 15, 2026), is fully functional, and is available for immediate pickup. Documentation is available. Credpo Agv Thsfx Aiioi

Condition: excellent (used), Equipment: foot remote control, Welding rotary table, 5000 kg load capacity Cedo Ah Swhopfx Aiijri Approximate height when tilted: 930 mm Approximate height when horizontal: 1160 mm Diameter of the clamping plate: 1100 mm Length: 1800 mm Width: 1200 mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 Cedpfxjyxvwio Aiisri _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Cedpfx Aien Sl D Rjisri

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Comes with various accessories, including piping and automatic control for self-cleaning. The system has 2 suction inlets and one outlet for the filtered air. I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Dimensions: approximately 4 x 2.5 x 3 m. Crjdpfx Aezn Uk Deiiei

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Crodj Aduyhspfx Aiiji Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 14061094-02, workpiece weight (max.): 2,200 kg, total width: 4,480 mm, total length: 4,450 mm, total height: 1,600 mm, air pressure: 6 bar, We offer this used KMW Engineering A4PH-3228-0,2 4-head welding machine of PVC window frames. Used in single/morning-shift production only. First owner. Csdpe Aa Rm Ajfx Aiisri In 2022 main mechanical parts were replaced by KMW. Cost 22000€ Machine is disconnected and stored in fabrication hall. I can send video of operation when it was part of fabrication process. Year of construction: 2006 (2022 reconstructuction) Supply voltage: 400 V Operating power: 11 kW Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Welding table with clamping system Crjdpe Ahm Sqjfx Aiiji Manufacturer: Siegmund Large format: 3000 x 1500 mm with clamping system and trolley

Condition: good (used), Year of construction: 2020, functionality: fully functional, Equipment: type plate available, We are offering this excellent TEKA Caremaster welding fume extraction system for sale. Manufacturer: TEKA Model: Caremaster Credpfx Ae Agcwwjiioi Machine type: Welding fume extraction system Without filters!!! Two units available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 222262, Offer 26269 Technical specifications: - Welding current: max. 400 A, 52% duty cycle - Welding current: max. 290 A, 100% duty cycle - Adjustable welding current - in 2 coarse steps and 10 fine steps from 30 A to 400 A - Digital voltage and amperage display - 4-roller wire feed, continuously adjustable Codo Ah Eqzepfx Aiieri - Control unit M 101 for: - Two-stroke/four-stroke regulation - Interval welding - Spot welding - Continuously adjustable creep speed and wire burn-back time - Hose pack approx. 4 m - Ground cable - Pressure reducer - Connection: 400 V - Space requirement: approx. W 650 x H 1100 x D 1100 mm - Weight: approx. 180 kg

Condition: ready for operation (used), Welding positioner, Thieler, 6000 kg load capacity Height in horizontal position: 1530 mm Height in tilted position: 1250 mm Diameter of the clamping disc: 1100 mm Length: 2600 mm Crjdpfx Aio Ah Sngoiei Width: 1200 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 1,500 kg, Equipment: documentation/manual, Used rotating device in very good condition. - Year of manufacture 2016, mobile, rotatable 360° for assembly, welding, etc. - One unit driven, the other unit rotates passively. - CE certified, with documentation. - Adjustable axle distance. - Max. component weight 1500 kg. - Max. diameter 1600 mm. - Max. component torque 2080 Nm. - 2-hand operation. - Optional foot control. - Protection 16 A. - Own weight 670 kg. Like new. Codpfx Aez S U Rdeiijri 2 units available for sale.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 15-0577, Offer 26279 Clamping, aligning, and welding table with T-slots and cast iron rails Technical data: Cjdpe Ah Ri Dsfx Aiieri - Length 3000 mm - Width 1500 mm - Table height 835 mm - Max. point load (with adjustable feet) 1500 kg - Grid engraving 100 x 100 mm - Axle spacing 100 mm - Weight approx. 600 kg

Condition: excellent (used), CATALOGUE NUMBER 7918 TECHNICAL DATA - max. disc diameter: 450mm - spindle diameter: 30mm - top pneumatic clamping - disc guard - disc guard also functions as a clamping device - pneumatic disc extension - cutting height (at a width of 250mm): 120mm - at a smaller height, the width will be larger - main motor: 6kW - diameter of dust extraction port: 120mm - table dimensions (length/width): 650x850mm - table height from the base: 1000mm - roller tables: - infeed roller table + pawl: 3180mm - outfeed roller table + pawl: 2450mm - width of sliding roller: 360mm - operating pressure: 8 bar - overall machine dimensions (without roller tables) (length/width/height): 1300x1050x1800mm Cjdps Af I E Iofx Aiieri - weight: 550kg ADVANTAGES - 2 roller tables - pneumatic disc stroke - used saw, in perfect condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Cedjz N Am Uepfx Aiieri Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Crjdpfxs Ahm Iie Aiioi Total weight approximately 2400 kg