Used Weld Tig Welder for sale (6,131)

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals Cjdpoxaal Rjfx Ab Iora - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction -Drive: 0.75 kW -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Quantity: 3 pieces available -Price: per piece Crjdox I Aknepfx Ab Ija -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Crodpfordf Acjx Ab Isa Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Crjdjyx Exvepfx Ab Iea

Condition: like new (used), Year of construction: 2019, operating hours: 253 h, Welding robot KUKA from December 2019, very little used. 253 hrs. The robot is connected, available for testing, inspection in Lithuania. Industrial robot KUKA KR8 R2100-2 arc HW Working lifting load: 8 kg Maximum reach: 2100 mm Number of axes: 6 Positioning accuracy (ISO9283): +-0.04 mm Fixing: floor Protection class: IP54 Three-axis positioner KUKA KP3-H2H500 Axes: 3 Working load: 500kg (per conductor side) Positioning accuracy (ISO9283): +-0.04 m Distance between discs: 3 200 mm Merkle Hight Pulse 452 rs welding source kit Phases: 3*400V Working range: 20 - 450A Welding voltage: 15 - 36.5 V Protection class: IP23 Applications: MIG/MAG, Pulse ARC, MMA/s Components: torch, cables, wire feeding mechanism, wire reel with bracket. Software: KUKA Office Lite KSS 8.5 offline TBI automatic clamp. Burner cleaning station 3 functions: pniaumo - nozzle cleaning, wire cutting, silicone coating. Cedpfx Aborgqx Uo Isra If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Year of manufacture 1994, modernized by the machine manufacturer KUKA in 2012. The system is equipped with a turning unit, bead punching unit, and a tube feed unit for unloading the welded components. We can adapt this system according to customer requirements. A complete retrofit is also possible. Crjdpfx Abjx I Efbj Isa

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Crodpfxev Nrfxe Ab Iea Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman Dust Extraction System / Silo Dust Collector with Control Unit and Compressed Air Preparation Condition: Very good, commissioned in 2023 and operated for only 2 years until 2025; dismantled due to plant closure Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems Design: Compact steel construction with integrated filter module Filter cleaning: Pulse-jet compressed air cleaning Installation type: Roof-mounted on silo Typical use: Industrial dust extraction, bulk material handling, environmental technology Fan Manufacturer: Nederman Model: FMZ 620 Year of manufacture: 2023 Power: 3 kW Explosion-proof design Control Unit Manufacturer: Nederman Model: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pressure Vessel Manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Model: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum allowable pressure: 7 bar Permitted temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control Cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed Air Treatment: Camozzi MC202-D00 Max. input pressure: 16 bar Output pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB control/terminal box Version: Dust extraction system for silo applications with integrated filter unit and fan Credpfxsyxvpfj Ab Ioa Accessories / Scope of delivery: - Electrical control cabinet with control system - Compressed air preparation unit with pressure gauge - Pressure vessel for pulse cleaning - Fan with motor - Pipe connection with weather protection grill - Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, input voltage: 400 V, The KEMPER Filter-Master XL welding fume extractor was manufactured in 10/2021. It is connected via 400V, 16A three-phase power. An air compressor must also be connected, providing 5-6 bar compressed air to the unit. The extraction hose is fully adjustable, allowing for comfortable operation. The device has been function tested and comes with an electrical inspection carried out by a certified electrical company. Codoyy Squopfx Ab Iora

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, type of cooling: water, welding current (min.): 60 A, welding current (max.): 450 A, Carl Cloos GLC 451 C - Water-cooled Mig Mag Step-controlled Specifications: 60-450 AMP 380 Volt Water-cooled 30 steps adjustable 2/4 stroke 4 roller driven Adjustable burnback time Crodoyy Skuopfx Ab Ija Includes: Mig welding torch, earth cable with clamp, gas hose, and 10 metre intermediate package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Crjdpfeyxrhdex Ab Isa Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Condition: repair required (used), functionality: limited functionality, Assortment of welding machines, approximately 20 units. Semi-automatic, TIG, electrode. Some machines are still operational, most require repair. Credpsyy Ipgsfx Ab Ioa

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Codpsyxm R Tjfx Ab Isra -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 .433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit Crsdpfx Abeyxm Rte Ija -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Cedpfeyxm Rasx Ab Ijra -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type 2.0 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H120 mm -Weight: 6.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit Csdpeyxm Ixefx Ab Iera -Welding converter: Type 41B30 92420 353324 -Horn: Type CTC205708 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Crjdpfxjyxm Hnj Ab Ioa -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available -Price: per piece -Dimensions: 450/100/H145 mm -Weight: 15.7 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos Crodpoxyw H Esfx Ab Ija -Number: 3x ultrasound transducer units available -Price: per piece -Dimensions: 450/100/H70 mm -Weight: 4.8 kg/pc.

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Cjdpeunh Uvefx Ab Isra Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: ready for operation (used), Year of construction: 2010, operating hours: 500 h, functionality: fully functional, Used Lincoln Ideal Arc DC 1000 submerged arc welding machine in good condition, equipped with LT 7 tractor, 25 m connecting cable, and comes with warranty – for sale! Credpfxeyy Dkmo Ab Ioa

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm Crodpfx Aboyxhhys Ija bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: new, table length 2000 mm table width 1000 mm table height 300 mm bore 28 mm weight 830 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid Crjdpoyxhhtefx Ab Iea - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch Crodpfeylk A Sex Ab Ioa -TIG hose package: Gas-cooled -Length: 4 m -Connector: 3-pin -Quantity: 1x hose package available -Price: per piece -Dimensions: 340/340/H70 mm -Weight: 1.8 kg/pc.

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Crjdpsw U Ezzefx Ab Ioa Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: excellent (used), Year of construction: 2013, operating hours: 150,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min. 2400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. Cedoyyxvwjpfx Ab Isra