Used Weinig Unimat 500 for sale (479)

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Kfedperb An Uefx Affoa Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, For sale is a used four-sided planer/moulder from Weinig with 7 spindles and powered infeed roller conveyor. The machine has been in operation since at least 1985 and was overhauled in the workshop in 2007. It is in working condition but is no longer in use. The exact year of manufacture is unknown; based on its design and equipment, it is likely a Weinig Unimat 17 series machine from the 1980s. Technical data (approximate values): - 7 spindles - Spindle diameter: 40 mm - Working width: approx. 20 – 170 mm - Working height: approx. 8 – 120 mm - Tool diameter: up to approx. 160 mm Kodpjw Rkqgofx Affofa - Feed speed: 6 – 24 m/min - Voltage: 380 V / 50 Hz - Weight: approx. 4,500 kg - Including powered infeed roller conveyor - Including various cutters (see photo) Note: This is a used, older model machine, being sold without warranty. Inspection by appointment possible.

Condition: excellent (used), Year of construction: 2006, operating hours: 4,794 h, functionality: fully functional, machine/vehicle number: 106442, WEINIG FOUR-SIDED PLANER TYPE UNIMAT SUPER 4 YEAR OF MANUFACTURE 2006 NUMBER OF HOURS WORKED 4794 ADDITIONALLY WEINIG EM 15 FEEDER TYPE 715 9177247 Machine in very good condition TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools 1) lower head 11 kW 6000 U/min 2) upper head 22 kW 7000 U/min 3) lower head 5.5 kW 6000 U/min Kfodpfxevnr Epo Affea feed motor 2.2 kW feed regulated on the inverter feed on cardan shafts two side rollers pneumatic five upper steel pulling rollers one rubber upper roller grooved table length of the preliminary table 1975 mm electric adjustment of the upper head electric adjustment of the roller height automatic central lubrication WEINIG EM 15 belt feeder guiding channel belt width 250 mm stepless feed, regulated by a frequency converter hydraulic unit 1.5 KW (2 HP) feed speed 10-50 m/min width of the feed rollers 20 mm feeder length 4600 mm Machine connected in the production cycle

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle Ksdpfsqu Sc Hsx Affofa First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: ready for operation (used), Technical characteristics Working width : 20 to 300 mm Kfedpfx Asr Av T Hoffea Working height : 8 to 120 mm Feeding speed 6 to 46 m/min Heavy drive (15 kW) 9 shafts Superior soundproof option Composition : Lower spindle 11 kW, diameter 50 mm Right-hand spindle 11 kW, diameter 40 mm Left-hand spindle 11 kW, diameter 40 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Machine sold with input mechanization : chain transfer 6000 x 2500 mm Special configuration, ideal for parquet and deck boards Power and Motors Voltage: 400 V Pluging: Three-phased Power: 114 Kw Motor: 9 x 15 CV Overall dimensions Lenght: 5200 mm Width: 2200 mm Height: 1800 mm

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter Kfjdeqprk Tjpfx Affja - WEINIG EM 15 - Total connection: 45 kW

Condition: excellent (used), Four-side planer Weinig Unimat 17 Working width: 170 mm Kjdpfxjwtp Nhj Affofa Working height: 140 mm Number of spindles: 6 Spindle arrangement: Bottom: 5.5 kW Right: 5.5 kW Left: 5.5 kW Top: 7.5 kW Bottom: 5.5 kW Universal: 5.5 kW Adjustable cutter heads Feed speed adjustable via variator 6–36 m/min Drive via cardan shafts Feed motor: 5.5 kW Pneumatic material pressure rollers Total power: 41 kW

Year of construction: 1987, condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm Kfsdpfxjlx Em Uj Affoa 5 spindles: 1. lower 2. right 3. left 4th top 5. universal feed speed 6.5 - 49 m/min. cardan feed electrically lifted pressure beam

Condition: good (used), Year of construction: 2004, I sell the fourside moulder Weinig Unimat 300 Feeding speed 5-30 m/min. Kodpor Arr Eefx Affofa Working width 230mm Working height 130mm 5 spindles Configuration: bottom - right - left - top - bottom Total power 28kW 3-zone pneumatical pressure Good condition Fully working! Available immediately Including full documentation and CE certyficate.

Condition: excellent (used), working width 250mm working heigth 130mm 6 heads heads set: bottom/right/left/top/top/bottom toothened roll in the infeed table variable regulated feeder spindles diameter 40mm feeder with cardan Kfsdpfx Afsw Afbrjfoa pneumatic pressure of feeding rolls two axes heads regulation

Condition: ready for operation (used), Technical characteristics Capacity : 260 x 160 mm Feed rate : 5-30m/min Axial radial and beam adjustment by numerical control Control panel Modem connection 5 POWERLOCK shafts Lower planer 15 HP Right spindle moulder 10 HP Left spindle moulder 10 HP Upper planer 15 HP Lower planer 10 HP Power and Motors Voltage: 400 V Kodpfx Ast Rrc Njffjfa Pluging: Three-phased Power: 50 Kw Overall dimensions

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg Kfodjvtpk Hjpfx Affoa

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 140mm Number of spindles 7 Kfederup Igspfx Affsa Arrangement of spindles Bottom 7.5kw Right 7.5kw Left 7.5kw Right 7.5kw Top 7.5kw Bottom 7.5kw Universal 360° 7,5kw ATS control system Corrugated table Pulling rollers in the work table driven Feed on cardan shafts Feed motor 5.5kw Feed speed 6-36m/min Total power 61kw

Condition: used, Year of construction: 2007, from training workshop, public facility, chrome-plated stops and machine table used, top condition, hardly used, top equipment Make Weinig Type Unimat 300 Year of manufacture: 2007 Number of spindles 5 Spindle arrangement u-right-li-o-b Motor brakes Planing width approx. mm 20-230 Planing height approx. mm 8-160 Spindle diameter mm 40 Table length approx. mm 2000 Pre-milling cutter Pneumatic pressure of the rollers Protective cover Table lubrication lubricant pump Feed in front of the planer Feed speed continuously variable 5-30 m/min. Profiling D 125 - 200 mm Electrical adjustment of thickness shaft Digital displays complete. incl. profiling Storage location 97447 Gerolzhofen, free loading, unpacked Kfsdpevwghkefx Affoa Handed over in the current condition, as inspected, without guarantee or warranty

Condition: excellent (used), Year of construction: 2005, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table spindles diameter 40mm spindles speed 8000 RPM Power Com controller variable regulated feeder 5-30m/min Kedpow Afazefx Affofa

Condition: ready for operation (used), Technical characteristics Composition (7 shafts) : Planer 7.5 kW Right hand spindle moulder, Left hand spindle moulder 11 kW Planer 11 kW Planer 7,5 kW Kfedpfx Aet Ruubsffoa Right hand spindle 18,5 kW (possibility to install lenght cutting blades) Left hand spindle 18,5 kW (possibility to install lenght cutting blades) Shaft diameter 40 mm Feeding speed : up to 24 m/min Working width: 230 mm Working height: 120 mm Speed of rotation of the shafts 6000 rpm Cast iron frame, cast iron table Power and Motors Voltage: 230 V Pluging: Three-phased Power: 83 Kw Overall dimensions

Condition: excellent (used), functionality: fully functional, Weinig Powermat 500 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Right 5.5kw 8000r.p.m Left 7.5kw 8000r.p.m Top 7.5kw 8000r.p.m Bottom 7.5kw 8000r.p.m Universal 5.5kw 8000r.p.m Spindle #6 equipped with power lock system Feed speed adjustable by inverter up to 30m/min Kfodpfjvfr Rgjx Affsa Pulling rollers in the worktop (1 grooved roller for wet wood) Electro-motorized positioning of height and working width Pneumatic material stops Drive on karda shafts Total power 41kw Year of production 2005 CE certificate

Condition: excellent (used), Year of construction: 1998, working width 230mm working height 140mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM Kjdpfx Ajw Afaheffjfa electric regulation of pressure beam feeder with cardan variable regulated feeder heavy silenced cabinet

Condition: excellent (used), spindle diameter: 40 mm, spindle speed (min.): 6,000 rpm, working width 230mm working height 140mm 6 spindles spindles set: bottom/right/left/right/top/bottom spindles diameter 40mm variable regulated feeder electric adjustment of infeed fence electric adjustment of infeed table Kfodpfx Afep N Ehfjfja ATS fast locking spindle system

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM Ksdpfx Afopkwaxjfjfa electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles set: dolna/prawa/lewa/górna Kfedpfx Afeqfd Dlefoa spindles diameter 40mm pneumatic pressure of feeding rolls table lubrication

Condition: excellent (used), working width 230mm working height 160mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min Kfsdpfx Afsqmmfuofja chrome table pneumatic pressure of feeding rolls

Condition: used, conveyor belt length: 4.500 mm Kodolf I I Eopfx Affefa conveyor belt width: 120 mm Inlet conveyor belt, outlet conveyor belt or connecting conveyor belt Weinig LTB 120/4500

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Kfedpfxoxz Thbj Affsa 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 spindles, Working width: 230 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 37 kW / 12-120 m/min Spindle configuration: 1 - Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2 - Right (11 kW) 3 - Left (11 kW) 4 - Top (37 kW) – with fully automatic straight jointer 5 - Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6 - Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 8 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 9 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 10 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm Short infeed table, 1.3 meters (4 rollers) with 2 powered rollers above the table and 2 powered rollers in the table. Both table rollers are liftable. Table height adjustment with electronic digital display. Includes 2 heavy-duty lateral pressure rollers, diameter 140 mm, pneumatically actuated. Ksdpfx Asxvmm Tjffjfa Support feet, height 320 mm, for table height of 1190 mm. Marathon POWER Coating for machine table, fences and guide rails (excluding infeed table and special table plates). Special coating for the protection of table plates, fences, and guide rails against excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, particle board, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, with a diameter of 120 mm. Located in the area of the right and left spindle.