Used Weiler Lathe for sale (182)

Condition: ready for operation (used), A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible. Hodpfx Aex Hz N Hohvei

Condition: ready for operation (used), A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible. Hjdpfxjyarqge Ahvsi

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Hjdpfx Aox I Rtkehvei Screen display housing: Blue NCSS 4550-R80B

Condition: good (used), Year of construction: 2000, Weiler Primus VC, year of manufacture 2000, digital readout, center distance 500 mm, max. turning diameter over cross slide 150 mm, spindle speed up to 4,000 rpm, spindle bore 40 mm, spindle drive 1.5 kW, Multifix toolholder, 24 longitudinal feeds, metric threads, imperial threads. Hjdpfx Aheyh Hkhevei

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Hedpfx Aheyfnwmovei

Condition: repair required (used), Year of construction: 1990, LZ-Lathe Fabr.WEILER Type : COMMODOR Year 1990 with 3 axes digital readout Heidenhain, Multifix holder B, steady rest, machine documentation Machine is defective ( clutch ) Hodpfx Ajq Hd Ipohvsi Center height: 214 mm turning diameter over face support : 200 mm Center distance : 1000 mm spindle bore : 60 mm Spindle speeds : 45 - 2000 rpm Machine is sold at a fixed price.

Year of construction: 2010, condition: like new (used), We have the following accessories for Weiler E30 lathe. 1.piece .faceplate Schunk 250mm price:600,-€ Spindle head DIN 55027 size 5 2.pieces.faceplate Röhm 260mm price each 1.piece:650,-€ spindle head DIN 55027 size 5 Hedpfsgabvnex Ahvsi 1.piece.travelling steady rest Price: 450,-€ 2.pieces.driving flange Price per. 1 piece: 210,-€ Spindle head DIN 55027 size 5 All parts are in very good condition.

Condition: excellent (used), Year of construction: 2020, Fixed steady rest for WEILER E 50 lathe in very good condition. Hedpfxjtx Avko Ahvei Clamping range : 10 -150 mm.

Condition: used, Year of construction: 1999, Max. Turning length 6.020 mm centre height 550 mm centre distance 6.000 mm max. swing over bed 1.100 mm max. swing over facing slide 730 mm max. workpiece weight 6.000 kg Spindle diameter in forward position 178 mm faceplate diameter 1.000 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 140 mm max. chucking diameter 500 mm control WEILER Lathe - cycle-controlled | WEILER - E110 x 6000 equipped with a PARAT tool system as well as a chip conveyor. A comprehensive tool package, including several steady rests and a heavy-duty boring bar holder, is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time in the Swiss factory location. Hodpfx Ahsydqqysvsi Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-110 | E 110 | E110 x 6000 | E110x6000 | E 110 x 6.000

Condition: good (used), Year of construction: 2000, Radial drilling machine WEILER VO 75, no. 146382062, year of manufacture 2000, outreach approx. 200 cm, with 2 large clamping cubes. Hsdpsyhqngofx Ahvei

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014, Machine no. JD12 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 – 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) Hedpfxsydczdo Ahvji >> Input of feed rates and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Thread cutting possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1,400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Features: >> Weiler digital readout >> Collet chuck (new), collet set NEW from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> 160 mm 4-jaw chuck with 2 sets of jaws >> Multifix size B quick change toolpost with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Digital Readout: >> 8 inch color display >> 3 axes for bed, cross, and compound slides >> 99-tool memory >> Spindle orientation stop >> Input of either constant speed or cutting speed >> Feed and threading settings are displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2014, in very good condition with original paint. The machine is, of course, fully functional and equipped with new collets and chucks. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits Hedpfex D Ibbox Ahvsi • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Moving steady rest clamping range: 12- mm/ The machine has been working effectively in 1-shift operation since it was purchased/ The chuck incl. hard & several sets of soft jaws and the tailstock can be supplied as accessories/ Any associated tools could be discussed in the event of an order/ The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Year of construction: 1977, condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Hsdenkad Sspfx Ahvei

Condition: used, turning diameter 240 mm turning length 530 mm control Siemens 840D SL swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min 12 Stk. Hodpeycxibefx Ahvji total power requirement --- kW weight of the machine ca. 6,1 t

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Hjdpfx Ajyciw Aohvei Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, WEILER E30X750 Lathe (Year 2007) with Siemens 810 D Control – Immediately Available For sale is a WEILER E30x750 lathe from 2007, in excellent, well-maintained, and fully functional condition. The machine has operated reliably and is ready for immediate use. Inspection is possible by appointment in Graz, either onsite or via video call. Additional images and videos of the machine in operation can be provided upon request. Key Facts Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Hsdpfjvphv Tsx Ahvsi Control: Siemens 810 D Condition: fully functional, ready for immediate operation Location: Graz Inspection: onsite or by video call by arrangement Power-on hours (machine powered): 26,492 h (Operating hours are significantly less! Based on experience, actual spindle running hours (cutting time) account for approximately 30% to 50% of this value, i.e., about 8,000 to 13,000 hours.) Electrical connection: 400 V Technical Data: Working Area - Centre height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 160 mm - Distance between centres: 750 mm Main Spindle - Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 - Spindle bore: 41 mm - Spindle diameter at front bearing: 70 mm - Max. torque at spindle: 180 Nm Main drive - Drive power 100% / 60% duty cycle: 9 / 11 kW - Speed range: 1–4,500 rpm - Number of speeds: stepless Feed / Rapid Traverse - Feed drive: three-phase AC feed motors - Feed range (stepless): - Longitudinal: 0.001–50 mm/rev (Note: also stated as 0–20 mm/rev) - Transverse: 0.001–50 mm/rev - Feed force: - Longitudinal: 6,000 N - Transverse: 3,000 N - Max. rapid traverse speed longitudinal/transverse: 8 / 4 m/min (Note: also stated as 10 / 7.5 / 5 / 3.5 m/min) Threads - Metric threads: 0.1–2,000 mm - Inch threads: 112–1/64 tpi Tailstock / Quill - Quill diameter: 50 mm - Quill stroke: 110 mm - Internal taper DIN 228: MT 3 Accuracy - Acceptance accuracy: DIN 8605 Dimensions / Weight - Machine weight: approx. 1,400 kg - Dimensions (L × W × H): 1800 × 1350 × 1700 mm Note: The original price was €97,000. Interested? Contact us for further information or to arrange an inspection. We are happy to send you additional photos and videos of the machine in operation.

Condition: good (used), Center distance: 800mm Spindle clearance: 38mm Center height: 165mm Turning diameter over bed: 330mm Turning diameter over slide: 170mm Speed: 24-2800 Dimensions: 1600mm x 600mm x 1250mm Hsdpsukrtnsfx Ahvei Weight: 850 kg

Condition: used, Year of construction: 2009, Technical details: turning diameter: 800 mm turning length: 4500 mm control: 840-3 Circulation diameter via slide valve: 510 mm Shift of the planing slide: 410 mm bed width: 480 mm spindle head: DIN 55027 Gr. 11 spindle bore: 106 mm speeds:: 1-1800 1/min Hodoyb R Exopfx Ahvoi diameter of quill: 115 mm Inner cone of the quill: MK 6 quill stroke: 225 mm total power requirement: 37/30 kW dimensions of the machine ca.: 6500 x 2500 x 1950 mm weight of the machine ca.: 8000 kg Equipped as follows: - 3-jaw chuck - 700 mm steel faceplate - Drill stand - PARAT tool post - Chip conveyor - Dust extraction - Heavy-duty coolant pump - Spindle brake

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC Lathe Weiler DZ 42 Year of manufacture: 2008 Control: Siemens 840D / Shopturn Manual loading up to D 220 mm Material passage: 42 mm Max. turning length: 450 mm Hsdpfx Aheyayc Dovsi Spindle speed: 6300 rpm Machining Turret with 16 driven tools X/Z/Y / C-axis Collet chuck

Condition: good (used), Year of construction: 1989, Lathe is in good condition, 1 meter between centers, 210 mm center height. Original paint, little used! Multifix B, various holders included. + 1 box with turning tools. Hodpfx Aheygbcrovei

Condition: good (used), L&Z spindle lathe WEILER COMMODOR B from educational institution -GS identification -3-axis digital readout "NEW" -Centre height: 180 mm Hodpfsyf U E Dox Ahvoi -Centre distance: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 15 - 2000 rpm -Automatic longitudinal & cross feeds -Thread cutting: metric / imperial / module / diametral pitch -Electric chuck guard -2 x emergency stop -Multifix with insert -Four-jaw chuck - Röhm -Chip guard rear panel -Coolant system -Very well-maintained original condition -Documentation Dimensions: LxWxH 2.3x1.2x1.7 m / Weight 1600 kg Errors and omissions excepted

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop Hodpjw Sdr Hofx Ahvji

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Weiler Praktikant VC Precision Centre Lathe Year of Construction 1999, 3-Axis Siemens Digital Display with AC Drive, Infinitely Variable Spindle Speed, CE Compliant!!!! Technical Data: Hedpfxeyapwds Ahvei - Year of manufacture: 1999, Machine No. 82 - Centre height: 160 mm - Distance between centres: 650 mm - Spindle speeds: up to 4000 rpm, infinitely variable - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse Taper MK 3 - Feed rates: 0.02 to 0.63 mm/rev - Cutting threads: Metric, Inch, Module and Diametral Pitch - Metric thread pitches: 0.25 to 8 mm - Weight: approx. 920 kg - Spindle brake, switchable - Machine dimensions approx.: 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and Features: - 3-axis Siemens digital readout - Quick collet chucking device for collets from 2 to 29 mm, in 1 mm increments - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix size A with 3 tool holders - Electronic chip guard - Change gears - Machine feet - Splash guard About the Machine: Offered for sale is a Weiler Praktikant VC lead and feedscrew lathe from year of manufacture 1999, in very good condition. The control system, in combination with the precision centre lathe from Weiler, provides the following functions: graphical display of travel distance and direction, graphical representation of the scale system on the lathe, compensation for tool offset, zero point shifting for workpiece position compensation, radius/diameter switching, graphical display of the main spindle rotation, graphical display of the machine’s speed potentiometer position. A very fine lathe featuring an AC drive with infinitely variable spindle speed. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and is capable of producing surface finishes comparable to grinding. The digital readout makes operation even easier and more precise. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm Hodpfowgi Tmox Ahvji turning length / mm

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Hodpfx Aoyaimfjhvei Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm