Used Imcar for sale (6)

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: PROGRAMMABLE PLATE ROLL, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 240 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 15 mm, overall weight: 8,000 kg, total length: 4,400 mm, total width: 1,600 mm, total height: 1,550 mm, power: 8 kW (10.88 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, 4-roll plate bending machine NC 4 axis equipped with side support and central support, Manufacturer Imcar-Italy year 2017, model 4RH10/4NC , capacity 2500 x15mm TECHNICAL DATA: Capacity plate width 2500 mm Plate thickness 15 mm Prebend 12 mm Upper roll 270 mm Lower roll 240 mm Surface useful on rolls 2550 mm Electric 380/50 motor 7,5Kw on centralized hydraulic unit Weight 8 Ton Machine dimension 4400x 1600 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable Dsdpfsyg Eazox Ac Nocc 1X central support vertical motorized ( see photo) 1X roller table with hydraulic side arm ( see photo) 1X NC controller programmable 4 axis Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Dcjdpswchn Uofx Ac Nec Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Dcodexqyxlepfx Ac Noc Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Power supply 380/50 electric 25 Hp on centralized hydraulic unit Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells

Condition: good (used), profile bending machine Dedpfx Aewtph Djc Necc

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Dodowtpgtopfx Ac Nscc Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Dodpfx Aswpku Dec Nocc Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.