Used Wedge Cutter for sale (3,241)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Ppsdpfx Aaezcux Ssheu Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Standard Electrical Data: Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Customer-side pre-fuse: 32 A

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, input frequency: 50 Hz, type of input current: three-phase, Universal Mixer – Fortschritt Universal machine Mixer, Type 15 Bowl capacity approximately 15 liters With 180° tilting function DGUV V3 certified – available only from us Connection: 400V, 16A CEE plug Used machine We have other machines in stock! Ppsdpfx Ajyunk Esahju

Condition: refurbished (used), Two stage cheese cutter for blocks of Cheddar, Mozzarella or Gouda cheese Load through side door on roller conveyor First cut pushed upwards on air ram through wire cutting frame Second cut pushed horizontally through 2nd wire cutting frame Cut pieces discharge along a roller convetor Ppjdpfx Aotuuzboaheu

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,051 h, machine/vehicle number: 281178, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Panasonic, controller model: MAZATROL PREVIEW 3, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 4,051 h, laser power: 6,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 3,150 mm, table width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 110 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 60 m/min, cutting speed: 120 mm/min, positioning speed: 170 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, type of input current: three-phase, type of cooling: water, overall weight: 15,500 kg, total length: 10,750 mm, total width: 5,000 mm, total height: 2,010 mm, Equipment: CE marking, USB port, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, type plate available, We offer a used 6kW Fiber laser cutting machine, Mazak OPTIPLEX 3015 FIBER II, manufactured in 2017. The machine is in very good condition and has been regularly serviced. It is equipped with: Psdpfxezca E Do Aahopu - automatic nozzle changer, - autofocus, - beam diameter adjustment, - automatic nozzle calibration, - automatic nozzle cleaning, - intelligent functions: piercing control, material ignition detection (black steel - oxygen assist gas), plasma detection (stainless steel - nitrogen assist gas). The unit is sold with a set of nozzles and protective lenses. A Donaldson DFPRO 4kW dust collector is also included. If you have any questions or need additional information, please send a message or contact us by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 40 kg, input voltage: 110 V, laser power: 60 W, type of cooling: air, total width: 1,520 mm, total height: 1,115 mm, total length: 1,205 mm, overall weight: 275 kg, warranty duration: 24 months, travel distance X-axis: 875 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 225 mm, Reliable cutting and engraving quality is ensured by proven core technologies and a robust design, which minimize downtime and keep your production running smoothly. A simple, efficient workflow with Ruby® Essential combines design, job preparation, and machine control into one connected platform for faster, clearer, and more intuitive operation. OptiMotion™ automation enables clean, fast cuts by dynamically adjusting speed and acceleration, saving setup time while consistently achieving high-quality results. Ppedpfx Aszcazlsahsu Centralized system control and smart electronics provide real-time monitoring of the laser, exhaust system, filters, and temperature, increasing uptime and making operation easier, even for beginners. Flexible support options allow you to start with an attractive entry-level system and add premium Trotec training, service, and spare parts support whenever you need it.

Year of construction: 2026, condition: new, ‼️SONDERANGEBOT‼️HIER IN STOCK IN HEILBRONN! Only while stocks last! ‼️SOFORT AVAILABLE ‼️AUF LAGER‼️ Powerful, robust machine at an affordable price from Josan & Söhne Alligator shears small: ➡️3 kw motor ➡️7 up to 8 shear strokes per minute. ➡️Maße 1100x980x800 mm ➡️Gewicht approx. 275 kg ➡️Spannweite 15cm ➡️Messer can be turned over at some point when they are blunt, allowing you to work with them for longer ➡️UVV (accident prevention regulation) made by German company here Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ Ppedpfsp E Ehqsx Aahsu Alligator scissors large: ➡️Motor 7,5 kw ➡️30 cm span ➡️7 up to 8 shear strokes per minute. ➡️Maße 249x109x174 cm ➡️Gewicht approx. 1500 kg ➡️Messer can be turned over at some point when they are blunt and thus work longer with them ➡️630 KN pressure ➡️Hydraulikdruck 21 mpa ➡️UVV (accident prevention regulation) made by German company here PRICE ON REQUEST Pictures/equipment may vary. Errors/changes excepted

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Pjdpfoyxy S Rjx Aahspu Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Ppsdsv Igtbepfx Aahou Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: like new (used), Code: 0609 Brand: OMAS Model: 120/3 Milling cutter for joints Diameter 120 mm Psdpfx Aajd I H Rcehopu Height 30 mm Hole 40 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Pjdpewqr Tdefx Aahepu Meter reading 48651 hours Operating system Fanuc L-64

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Pedjywpcpopfx Aahjpu Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Condition: excellent (used), Year of construction: 2000, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumrik 840D, table length: 6,500 mm, power: 2.2 kW (2.99 HP), overall weight: 7,500 kg, total length: 14,000 mm, total width: 3,000 mm, total height: 2,000 mm, Laser cutter Pedsy U If Rjpfx Aahjpu ADIGE - LT652 MACH-ID 9637 Make: ADIGE Type: LT652 Control: Siemens Sinumrik 840D Year: 2000 in feed 6500 mm length Max profile 140 x 140 mm Rofin resonator 2200 W Under power inspection posible ! Working area X Axis:6500mm Power resonator: 2.2kW / Amp Length: 14000mm Width: 3000mm Height: 2000mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: SIEMENS, controller model: SIEMENS 840D, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 170 mm, feed rate X-axis: 80,000 m/min, feed rate Y-axis: 80,000 m/min, overall weight: 20,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 6,500 mm, Laser cutter BYSTRONIC - ByLaser 4400 MACH-ID 9635 Make: BYSTRONIC Type: ByLaser 4400 Control: SIEMENS 840D Year: 2010 BYSTRONIC BYTRANS Loading arms with change position BYSTRONIC BYTOWER Plate storrage  Change Table foir in and out feed manipulation Dust collector 5.0 inch cutting head 7.5 inch cutting head Under power insopections possible ! Working area X Axis: 3048mm Working area Y Axis: 1524mm Working area Z axis: 170mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4.4kW / Amp Feed rate X-Axis: 80000mm/min. Feed rate Y-Axis: 80000mm/min. Sheet master loading arm:Yes, BYTRANS Ppedpfxsy U Htte Aaheu Sheet tower storage: Tes, BYTOWER Dust collector: Yes Cutting hours: 26000H Length: 12000mm Width: 6000mm Height: 6500mm Weight: 20000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Carousel Milling Machine RYE 40 SM SPEEDMAX Number of units: 3 Ppedsxf Iudspfx Aahsu Unit configuration: Milling machine Milling machine Grinding machine Pneumatic central material pressure

Condition: good (used), Year of construction: 1980, Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 pieces -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm Psdpfx Aeb A Hv Deahepu -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Condition: new, Technical Data: Fixed angle table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working spindle: Tool holder, horizontal and vertical: ISO 40 Power of the main drive motor / 100% duty cycle: 2.2 kW Vertical milling head: Speed range, stepped: (12) 50 - 2000 rpm Pedpfxjd R S Ndj Aahjpu Drill quill, stroke: 100 mm Swivel range: +/- 90° Travel distances: X-axis, automatic/manual: 385/400 mm Y-axis, automatic/manual: 185/200 mm Z-axis, automatic/manual: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: continuously adjustable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle runout max. 0.005 mm, incl. test report according to DIN 8615 (roller bearings SKF®/NSK®) - Vertical milling head can be swiveled for horizontal milling (without disassembly) - All critical parts of the machine, e.g. machine frame, table, milling head, housing, etc., are made of stress-relieved MEEHANITE® quality cast iron (FC 30) and are extensively ribbed to provide the machine with maximum stability and working accuracy. All guide rails are coated with TURCITE®-B - All machined surfaces in the working area, such as guide rails, table surfaces, T-slots, etc., are hardened and precision-ground. - The powerful drive transmits the power of the main motor to the gearbox via belts. - All axes have their own DC servo motors. These enable sensitive, stepless adjustment of the feed speed. Standard equipment: - DC servo motors for all axes X/Y/Z, incl. electromagnetic brake - Fixed box table - Original Ganter Norm® safety handwheels - Chip collection tray - Backlash-free HIWIN® precision ball screws in all axes X/Y/Z - Gearbox for main spindle - Safety device according to CE or better: - Spindle guard with several micro-switches, adjustable in several steps (enclosure available as an option) - Two emergency stop pushbuttons (1 x machine frame, 1 x control panel) - Mechanical Ganter Norm® safety handwheels in all axes - Electromagnetic spindle brake (for immediate spindle stop) - Electrical overload protection for all axes - Electrical equipment SIEMENS®, BALLUFF® - Braking system prevents the table from dropping - Three reducing sleeves SK 40 to MK 1, 2, 3 - Collet chuck with holder according to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Draw-in thread spindle - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Lamellar stainless steel cover for the Z-axis guide rail in the working area - Machine light - Coolant system integrated in the machine base - Test report according to DIN 8615 - Operating tool - Machine according to CE - Operating manual, parts list, incl. electrical wiring diagrams, etc.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual Psdpfxsy Umkfe Aahepu – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm Ppedpfx Asu Ng Npoahju surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm material: PET control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg Pedju Nw Ebjpfx Aahspu The plant is ready for transport and for sale. i.D. *

Condition: excellent (used), Tool holder from the renowned brand WNT, precision-made, G2.5 balancing up to 25,000 rpm – designed for HSC/HPC machining. Clamping diameter Ø5 mm, length 80 mm. Includes a VHM (solid carbide) end mill. Very good condition. Pedpew Rrutofx Aahjpu

Condition: excellent (used), Collet chuck from the renowned brand GARANT (Hoffmann Group) – guaranteed top quality and reliability in CNC machining. Model SK40-12-50, catalogue number 300100 12. • SK40 taper – industry standard for machining centres • Clamping diameter Ø12 mm • Chuck length 50 mm • Max. RPM 25,000 • High precision and dynamic balancing • Supplied with a mounted end mill. Very good condition, ready for immediate use. Professional tool for CNC milling machines, ideal for workshops that value quality and reliability. -- PRICE LISTED IS FOR 1 PIECE -- Ppjdpfxow Sy Ans Aaheu

Condition: excellent (used), WNT tool holder SK40 Ø8x80, HSC version with G2.5 balancing up to 25,000 rpm. Professional solution for HPC/HSC machining on CNC centers. Complete with a solid carbide end mill VHM (fine-pitch, multi-flute) – ready-to-use set. Very good condition, premium class equipment. Ppjdpfxew Rrv Re Aahsu

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Psdpfx Aaexcg H Hjhopu Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Pedpfx Asuhm Rboahspu Shears very good condition.

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Ppodpfxoxdh Hqe Aahju Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.