Used Wedge Cutter for sale (3,293)

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Iiodpfxjztn N Ro Abnjf Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake Iijdpfxjztn I Hj Abnjf – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Iedpjztn Iyjfx Abnsif Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Iisdpfxozb Dr Se Abnsf Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Well-preserved Schneeberger Gemini Linear tool grinding machine. With integrated automation incl. pallets. Iodpfx Ajtk Av Uebnoif

Condition: used, Year of construction: 2022, functionality: fully functional, Largest Flatbed Cutter SUMMA F3232, year 2022 for sale! Availability in January 2027. Iedpfx Abozuvzdsnjif Materials that work with the F3232: Textiles & soft signage, Wide-format banners & mesh, Vinyl & protective films, Large-format corrugated & carton, Industrial composites & synthetics, Wood & MDF, Foam, rubber & technical materials. Working area: 327 × 320 cm Dimensions: 422 × 422 × 122 cm Material width: up to 332 cm Vacuum: 2 × 2.2 kW (50 Hz) Vacuum zones: 14 (2 rows × 7 columns) Speed: up to 1000 mm/s Acceleration: up to 1 G Power requirements: 3 × 400 V + N, 50 Hz, max 20 A INCLUDED (the machine comes with): ✓ Vacuum system ✓ Conveyor system ✓ Integrated Safety System ✓ Optical Camera System ✓ ADC Tool Calibration (Right + Left) ✓ GoProduce ✓ GoProduce Pro Pack ✓ GoProduce Upgrade License Not included: Tangential module 2 pcs., Pneumatic Oscillating Tool - POT, Router module.

Condition: used, Rabolini Imperia B2 Heavy-Duty Platen Die Cutter / Creasing Press Short Technical Description / Summary Professional Italian-made Rabolini Imperia B2 platen die cutting machine ("clamshell" press). Renowned for its robust cast-iron frame construction and high cutting impression force. Ideal for die-cutting, creasing, scoring, and embossing on paperboard, solid cardboard, corrugated board, micro-flute, and plastic sheets. Key Technical Specifications Manufacturer: Rabolini (Imperia) Model / Brand: Imperia Format Size: B2 (approx. 520 x 720 mm ) Country of Origin: Made in Italy Machine Type: Clamshell Platen Die Cutter / Creasing Press Iedpfx Abozur Dbenjif Drive Mechanism: Heavy-duty motor drive with flywheel, clutch-brake unit, and reduction gear Operating Modes: Single stroke, continuous operation, and timed dwell (dwell timer) Compatible Materials: Cardboard, solid board, corrugated fiberboard, plastics (PP/PVC), foam board Features & Equipment Ergonomic top control box mounted on a movable arm for easy setting adjustments. Dwell timer to adjust the platen open time during manual feeding. Hardened steel cutting plate mounted on the movable platen. Integrated safety frame / sensitive guard bar system protecting the operator area. Centralized lubrication system for smooth, continuous operation. Condition & Availability Condition: Used, fully complete and intact. Sourced directly from print shop production.

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, overall weight: 1,300 kg, input voltage: 380 V, input frequency: 50 Hz, Cutter Laska – type: K 60 Capacity: 60 liters with 2 speeds; Iiedpezunxbjfx Abnef Dimensions: 1400 mm x 1400 mm x 1600 mm.

Condition: refurbished (used), functionality: fully functional, total length: 1,650 mm, total width: 1,900 mm, total height: 1,300 mm, warranty duration: 12 months, input voltage: 400 V, power: 34 kW (46.23 HP), input current: 70 A, input frequency: 50 Hz, Cutter K+G Wetter – 90 liters, set with emptying device Power supply: 400 V, 3 phases, 50 Hz Power: 34 kW Current: 70 A Material: stainless steel Volume: 90 liters Iedjzunwqepfx Abnoif Dimensions: 1300 mm x 1900 mm x 1650 mm The machine is available after a complete factory refurbishment with a 1-year full warranty included in the price

Condition: ready for operation (used), Sheet format: 890x1180mm, inner frame width: 820x1120mm, pressing force: 300t, motor power: 4kW, length: 1800mm, width: 2100mm, weight: 4.3t. Ijdpfjht Hfmox Abnsif

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Isdpfx Absix Ahbensif

Year of construction: 2022, condition: ready for operation (used), There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible. Ijdpoy Tx R Isfx Abnoif

Year of construction: 2008, condition: ready for operation (used), A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible. Iiodsw U T Upspfx Abnsf

Year of construction: 1986, condition: ready for operation (used), A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible. Ijdpfx Aexgudbsbnsif

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Iisdov Dkcfjpfx Abnef

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Iiedpfxevamq Ds Abnjf

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Iedjyxq Ucspfx Abnoif

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Isdpfx Abszhnuconoif

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Isdpfx Aozkvl Isbneif

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Iodpoy Tauhsfx Abnsif

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm Iedpfx Abjyu Nqmonjif X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: used, The used adjustable rounding cutter from Leitz is a cutting tool for professional woodworking. It is suitable for creating and machining rounded profiles on the top and bottom of wooden workpieces. The adjustable design supports flexible routing tasks in various applications. Technical data: - Blades: Z4 - Cutting circle (ø): 155.5 mm - Bore: 40 mm - Marking: MEC - Length: 2 x 35 mm - Material: Steel, aluminium Ijdpszr I Tmefx Abneif

Condition: used, Second-hand adjustable groove cutter from Guhdo with threaded sleeve for precise grooving work in professional woodworking. The tool is suitable for variable groove widths and typical milling work on wood-based materials. Iedpozr Iq Sjfx Abnoif Technical data: - Blade: WP Z4 V4 - Flight circle (ø): 160 mm - Bore: 30 mm - Marking: MAN - Length: 12.5–24 mm - Material: Steel

Condition: used, Year of construction: 2006, functionality: fully functional, Film cutting machine, robust model FSM L15 Year of manufacture: 2006 Location: Bad Tölz Iiodpfx Abszudzfjnof Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: used, Second-hand Leitz Variform profile cutter for woodworking applications. Technical data: - Blade: Z4 - Flight circle (ø): 165 mm - Bore: 40 mm - Marking: MEC - Length: 46 mm - Material: Steel Iedpfjzr D Srsx Abneif