Used Weber Cr 10 for sale (113)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Hfedpfx Aexu U Trog Djr Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole cylinder NW 600; small sheet cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Total length: 12,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 1.5 bar Support type: feet Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 liters Double-jacket volume: 105.0 liters Cylinder wall thickness: 5 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 9,000 mm Previous application: rapeseed oil TANK Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom tempering: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium Hsdpfx Agoxqb Rvs Dofr EQUIPMENT Manhole / dome: in cylinder, in top head, in top head (DN 600) Outlet: flange DN80 Note: dents in the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Heating/cooling system material: V2A 1.4301 (AISI 304) Foot material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 7 mm

Condition: used, Year of construction: 2007, Technical details: x-travel: 1100 mm y-travel: 900 mm z-travel: 1250 mm b-axis: 360 000 x 0,001 ° milling head speed: 1 - 10000 U/min spindle taper: ISO: 50 rapid traverse: 60 m/min pallet size:: 630 x 630 total power requirement: 37 kW weight of the machine ca.: 25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL Hfsdpsxp Hgtofx Ag Der *

Condition: good (used), functionality: fully functional, Offered is a Weber brand belt deskinner, Model: ASB 800, 400V, 16A, V2A. The machine is fully functional and ready for immediate use. Cutting width approx. 40 cm. The machine is in full working order and ready to operate immediately. Further details available upon request. Payment by cash or advance bank transfer. Hjdpsxt Rptofx Ag Defr Sale to businesses only, no warranty, no liability.

Condition: used, Weber Loading Conveyor Hsdpfxjxtfz Rs Ag Dsfr Model CZB Stainless steel

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Hfsdpsxpu Tbofx Ag Der

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364 Hfodsqpft Iepfx Ag Der

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Notes: Support ring and vessel flange made of steel; handhole cover plated Inner diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: yes Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top head: removable / hinged top head Agitator: anchor agitator Support type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Hedpfexqba Djx Ag Dsfr Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: Chemicals VESSEL Max. vessel operating temperature / °C: 300 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil FEATURES Manhole / dome: handhole Outlet: flange DN50 AGITATOR Agitator placement: centered in the top head Agitator configuration: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top wall thickness: 15.8 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Hedpfx Agjw Up Rme Djfr Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Hfsdpfx Ajdzp S Reg Dor Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Complete with controller Hfedpfetq E Rkjx Ag Dor Year - November 2022 In excellent condition

Condition: as good as new (ex-display), All parts from picture come with machine. Hsdpfx Agografks Dofr

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t Hfedpew Dbkrofx Ag Dor -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Year of construction: 2000, condition: ready for operation (used), Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts. Hjdpfx Aegmdr Uog Dofr

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw Hodjgm Tqwepfx Ag Defr 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw sweeping brush smooth regulation of feed speed weight of the machine: 2700 kg

Condition: used, Year of construction: 1990, Used Weber wide belt sanding machine with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Used as a backup machine. Hjdpswzlqkjfx Ag Djfr

Condition: used, Weber Skinner Model ASE 400 Year 2005 Hsdpfx Agewdyd Do Dsfr 400mm stainless steel skinner roller CE approved

Year of construction: 2005, condition: like new (used), WEBER MSG 460-5 ID.NO. 2553 Weber MSG 460-5 knife sharpener for sharpening round blades for slicers.. Dimensions 55 x 60 cm H 75 cm. Hfjdpfspcf Hisx Ag Dsr

Condition: used, 1118546, C 30 S-1M-PB, Weber, process control Hfedpjur U Htofx Ag Djr Model: 1118546 Type: C 30 S-1M-PB Condition: Used Note on condition: Housing dented on lid/adhesive residue on lid

Condition: used, Converter for bottle vibrators, vibrating bottles, internal vibrators Hedjb A Sxgspfx Ag Defr -Frequency converter -Number of vibrators: 1 -Cable length: about 6 m -Weight: 72 kg

Condition: new, Diamond Weber WM 306791 A/R0 3 diamond tool , serial no. according to photo ,unused in original box, 100% functional, scope of delivery according to photos Hfodpfx Asi D Upkog Der

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Hodpfxsvryhyo Ag Dofr Battenfeld V125

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3225716, Touch panel and PC for Weber extruder, new and unused Manufacturer: RMA Maschinenautomation GmbH Type: Touch Panel PC PSQ - ET PC-115-PSQ Year of manufacture: 2017 Serial no.: 3225716 Dimensions: appr. 400 x 310 x 80 mm, (WxHxD), incl. Front panel Weight: appr. 5.5 kg The touch panel including PC was purchased in 2017 from Weber - Kronach as a spare part. Hsdevmm Ayspfx Ag Dsfr After that, the touch panel incl. PC was no longer used.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48/Ø 36 mm -Pipe Ø outside: mm -Stroke: 500 mm Hfjdjb A I Hiepfx Ag Djr -Total length retracted: 570 mm -Ideal for building a hydraulic press -Number: 8x available -Price: per piece -Weight: 10.5 kg/piece

Year of construction: 2000, condition: used, Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator Hfjdohx E Ukspfx Ag Der -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg -Dimensions: 900/580/H1450 mm -Total weight: 454 kg