Used Waterjet Cutting Systems for sale (49,238)

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Chedpfxsx H Ny Ts Afgjc

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Chodpfx Ajxmkcmofgsc

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request Codpfx Ajq U Irmofgshc 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: ready for operation (used), Year of construction: 2011, Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026. Chjdpfx Aey T N Htsfgsc

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Chsdpfszlt Ayox Afgsc This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Csdpfx Aeydpmgjfgjhc Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ Chjdpfoznli Dsx Afgoc PLC control, touch screen display, Siemens

Year of construction: 1998, condition: ready for operation (used), A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible. Codpfsy Eg A Nsx Afgjhc

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Csdpfxskv Unts Afgehc Saw 7.5 kW Feed 6,9 kW worked 1995 - 2012 approx. 4 hours/day

Year of construction: 2020, condition: new, The Sapphire is the optimal solution for the heavy industry, handling material thicknesses up to 200 mm. It enjoys great popularity in a variety of production facilities – often those operating in three shifts – as well as in all applications where stability, efficiency, and process reliability are particularly important. Thanks to its high-quality equipment, the system is a versatile tool for the highest demands and a helpful instrument for process optimization. Having been deployed in over 400 industrial facilities worldwide, the Sapphire cutting system proves its worth every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - Extraction system PFC 6 incl. extraction ducts - Delivery, assembly, and commissioning Key features • High dynamics and precision in automated 2D & 3D cutting of sheets, tubes, and profiles • Sheet metal processing up to a material thickness of 200 mm • Extensive cutting data library for ideal user-friendliness • Designed for the highest demands under the most challenging conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2,000-7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Cedpfx Asf Ak N Rjfgjhc Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Height of work table: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. Chodpfx Aozikb Ujfgec For further questions, we will be happy to assist you by phone.

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Chsdpfxswmqwyo Afgjc

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Cjdpfezzw Irex Afgshc Brass 3 mm With loading and unloading system for the sheets

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Cjdpfxozz Ache Afgohc Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Cedpfx Aozikcfefgehc Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: good (used), Year of construction: 1994, Cutting unit with edge peeling for the Lisec ESL-60/30RS cutting line In good condition, as it has rarely been used. Csdpfoyx Dvmox Afgehc Length: 1100 mm Width: 800 mm Height: 850 mm Weight: 120 kg Condition: Good, second-hand

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Chedpfxehqnl Ts Afgsc Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: 20404881, Offer 23906 CNC - Flame Cutting Portal for Dismantling Technical data approx.: - CNC flame cutting portal with 4 torches as shown, for dismantling. - 4 x torches with automatic height adjustment - Torches feature tilt adjustment - CNC control unit NCE - Control cabinet - Track gauge approx. 3.5 m - Space requirement approx. 5 x 2.4 m Chsdpfow Nwucex Afgoc

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Chsdpfxezwt T Aj Afgjc Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm MACHINE DETAILS MACHINE DATA Machine type: ES 121 SHK 4 m Year of manufacture: 2023 Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Csdpfx Aszwxansfgshc Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: No warranty, installation, commissioning, and transport are included. Subject to prior sale.

Year of construction: 2002, condition: ready for operation (used), A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible. Chodpszi Eigsfx Afgsc

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Chsdpfxozf Nb Sj Afgsc

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Chsdpfx Afsd Ab Uusgoc Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, The Topaz plasma cutting machine is an advanced solution that is perfect for manufacturing operations where precision, efficiency and compact design are important. It offers reliability and high cutting quality and thus perfectly meets the requirements of modern companies. Main features: - Innovative technology solutions: Developed in cooperation with ECKERT and TEKA, offer modern functions and high performance. Chjdpfxsvmg N Ho Afgec - Exceptional quality and reliability The machine is manufactured in Germany with components from well-known manufacturers, which ensures exceptional precision, durability and reliability. Thanks to the robust manufacturing according to demanding standards, the operating costs of the system are reduced to a minimum. - Intuitive user interface: The machine's clear and easy-to-use control system speeds up work and increases the operator's productivity. - Excellent cutting quality: Thanks to the plasma systems from leading manufacturers such as Hypertherm and Kjellberg, the machine offers the best cutting quality. - The TEKA filter system: Provides clean air, which is especially important in small operations where space saving and air quality are crucial. During periods when the machine is not working, the system can act as an extraction system for welding or grinding work, eliminating the need for additional systems and reducing costs.

Condition: used, Year of construction: 1992, saw blade diameter: 550 mm, overall weight: 1,500 kg, power: 13 kW (17.68 HP), No. 3260 CNC cross-cut system Paul 14KE Used, year of construction 1992 (overhauled by the manufacturer in 2012) According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Chodoyl R Uuepfx Afgjc Saw blade diameter 550 mm Speed 3500 rpm Bore 120 mm Connected load 13 kW Workpiece length 600 - 7000 mm Workpiece width maximum 380 mm Workpiece thickness maximum 100 mm Wood cross-section minimum 12 x 40 mm Wood cross-section maximum 45 x 380 / 100 x 200 mm 6 driven bottom rollers 6 non-driven top rollers CNC control MAXI x.3 Complete with infeed, outfeed conveyor, switch cabinet and control Technical documentation available Weight approx. 1500 kg Sale on behalf of customer, ex location near 99091 Erfurt, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location