Used Water Goblin for sale (7,393)

Condition: ready for operation (used), * Brand: Skako * Model: dewatering screen Gkodpfx Akoywnhqeysc * Surface: 4000 x 1500 mm __ 1 deck. * Screen opening: [] 12 x 0,8 mm. * Driving: 2 pieces vibration motors of each 4,3 kW.

Condition: new, functionality: fully functional, Waters 2420 ELSD Low Flow Nebulizer. Gedpfxjua Iabe Akyjkc 2 for sale. 1 piece/590 EUR. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Godjua Tbwjpfx Akyjkc Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Gsdpfx Aeua U Tzokyskc Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager Gjdpfx Aszg Tzxekyjkc HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 266,500 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: silver, gearing type: automatic, emission class: euro6, total length: 9,350 mm, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 38 m³, loading space length: 7,050 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Cab & Comfort* M-cab ClassicSpace, 2.30 m wide, tunnel 320 mm * Comfort driver's seat (suspension seat), co-driver's functional seat * Seat covers made of velour (driver's and co-driver's seat) * Air conditioning * Auxiliary hot water heater, waste heat recovery * Electric windows on both sides * Multifunction steering wheel * Exterior sun visor (transparent) * Entry lights in door panel * Bottle holder, smoker's package Gjdpfjzhh Dkjx Akyekc ----Safety & Assistance Systems* Electronic braking system with ABS and ASR * Disc brakes on front and rear axles * High Performance Engine Brake * Stability control assistant (ESP) * Roll control assistant * Lane keeping assistant * Distance keeping assistant * Attention assist * Turning assistant * Active Brake Assist 5 * Tire pressure monitoring * Cruise control, speed limiter (90 km/h) * Hazard warning flashers during emergency braking * Acoustic warning for parking brake ----Lights & Visibility* Bi-Xenon headlights * LED daytime running lights * Fog lights * LED rear lights, ambient lighting, LED outline light * Headlight cleaning system * Automatic high/low beam and cornering lights * Front mirror (heated) * Curb mirror * MirrorCam * Light sensor * Rain sensor ----Drive & Chassis* Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm, Euro VI D * Transmission G 140-8/9.30-0.79, Mercedes PowerShift 3 * Front axle air-suspended (8.0 t), rear axle air-suspended (13.0 t) * Differential lock rear axle * Disc brakes on front and rear axles ----Multimedia * Multimedia cockpit (fully digital) touch * Digital touchscreen radio * DAB+ / * 2-way speaker system * Digital tachograph (2nd generation, ADR), trip computer * FleetBoard Eco & Support * Truck Data Center 7 * Rear view camera system ----Body:* Titgemeyer GETO Sider Curtainsider, year of construction 2020 * CODEXL certificate according to ADR DIN EN12642 & VDI 2700 * 1 Adaico 2.5 XL sliding tarpaulin per side * Sideboards (800mm) * Safety Roof * BÄR tail lift -----* Tire dimension front axle: 315/70R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 500 * AdBlue tank: 60 * Technically permissible total weight: 20500 * Unladen weight: * Permissible trailer load: * Overall length: 7330 * Wheelbase: 5200 * Next inspection due: ----Vehicle number/Vehicle: 12245----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle delivery, vehicle registration, recoveries and vehicle transport----YOUR VTS TEAM

Condition: good (used), Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Gkodpey N Uq Asfx Akysc Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

Condition: used, Used Becomix model Beco Mini Lab homogenizing mixer.  Manufacturer: Becomix. Capacity: Working capacity maximum of 5 Litres approximately Dimensions: 820mm x 820mm x 1250mm high approximately Pressure: -1/+1 Bar maximum working pressure  internally; 4 Bar maximum working pressure of the external jacket Conical welded bottom with a clamped dish top. Pressure and vacuum sealed by a double acting axial seal rings and cooled by barrier water flow. Bottom entry homogenizer: Power 1.55kW Torque 2.5Nm Specifications: Power: 1.6 kW Type: Mini Lab Dimensions: 820mm x 820mm x 1250mm Vacuum (Y/N): Y Capacity: 5 Litres Gsdpeyhd I Hjfx Akyokc Material Of Construction: Stainless Steel Jacket (Y/N): Y Type Of Drive: Bottom entry Weight: Estimated: Kg250.0 Dimensions: 820mm X 820mm

Condition: reconditioned (used), Year of construction: 2021, operating hours: 74 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, HAKO SCRUBMASTER B70 CL TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2021 with 74 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. A built-in battery charger and wheel drive simplify daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Gedpfx Akszvd Ihsyekc Power supply voltage (V): 24 Brush working width (mm): 650 Suction nozzle working width (mm): 950 Theoretical capacity (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW disc brushes 330mm PPL 0.5 (2x) NEW 24V 500W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal fluid - FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 74 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, HAKO SCRUBMASTER B70 CL TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2021 with 74 hours of use 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger and wheel drive simplify daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 650 Gkodozwk Nnspfx Akyjc Suction nozzle working width (mm): 950 Theoretical capacity (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW disc brushes 330mm PPL 0.5 (2x) NEW 24V 600W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal fluid - FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, mileage: 96,000 km, power: 110 kW (149.56 HP), first registration: 05/2018, fuel type: diesel, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Special equipment: Trailer stabilization program, audio navigation system Discover Media (touchscreen color display), speakers (4), multimedia interface USB (iPhone/iPod) with AUX-IN, electrical package 1, exterior mirrors electrically adjustable and heated, electrical interface for external use (CAN data bus) with connection terminal, suspension: reinforced suspension and damping, windows in the cargo/passenger compartment: fixed front right, no windows at the rear, tailgate with glazing, heated rear window, interior mirror with automatic anti-dazzle function, heated rear window with wiper system, high cargo compartment partition with fixed window, truck registration, Mobile Online Services Car-Net, mobile phone interface Bluetooth, multifunction display Plus, seat cover/upholstery: fabric Simora, seats in the cab: driver's seat heated, seats in the cab: driver's seat height adjustable, seats in the cab: driver's seat lumbar support, socket (12V connection) in the cab, additional winter tires (customer information required), permissible gross weight 3.00 t, auxiliary heater (hot water) with parking heater function and remote control, 2nd battery Gsdpfjzu Dwgjx Akyokc Additional equipment: Sliding door rail cover, airbag for front passenger can be deactivated, airbag driver/front passenger side, exterior mirror, aspherical, left, exterior mirror, convex, right, floor covering in the cab: rubber, driver assistance system: multi-collision brake, windshield laminated glass tinted, glove compartment lockable, interior filter: pollen filter, body/structure: standard van, body variant: normal roof, fuel tank: 70 liters, steering column (steering wheel) adjustable, engine 2.0 liters - 110 kW TDI, non-smoker package, wheelbase 3400 mm, tire repair kit, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, steel rims 6.5x16, start/stop system engine, door storage compartment front, trim in the cargo/passenger compartment: hardboard half-height, heat-protective glazing

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Gksdpfx Aozvn Hzjkysc Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Condition: reconditioned (used), Year of construction: 2020, operating hours: 1,178 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 72 l, HAKO SCRUBMASTER B70 CL TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2020 with 1178 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 650 Suction nozzle working width (mm): 950 Theoretical capacity (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW disc brushes 330mm PPL 0.5 (2x) NEW 24V 600W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Godpjzxdikofx Akyskc Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal fluid - FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2020, operating hours: 1,114 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, HAKO SCRUBMASTER B70 CL TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2020 with 1,114 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. A built-in battery charger and wheel drive simplify daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 650 Suction nozzle working width (mm): 950 Theoretical capacity (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW disc brushes 330mm PPL 0.5 (2x) NEW 24V 600W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal fluid - FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. Gjdpfx Aozwwcnjkyokc The large working width (650mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, mileage: 31,500 km, power: 85 kW (115.57 HP), first registration: 08/2022, fuel type: diesel, next inspection (TÜV): 08/2027, color: red, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, soot filter, Special equipment: Gjdpfxjzwytcs Akyjkc Active safety package, dashboard upper part in Artico leather-look, Audio-Navigation System Plus, velour floor mats, luggage compartment separation (net), interior chrome package, automatic climate control (Thermotronic), light alloy wheels 7x17, light alloy wheels, light alloy wheels 7x17 (5-double-spoke), light alloy wheels, air vents in the rear, metallic paint, navigation package, voice control system with extended functions (MBUX), multimedia system MBUX incl. navigation and DAB, pre-equipment for traffic information system Live Traffic, audio navigation system, parking package, driving assistance system: active parking assist, tow bar crossmember, front seat heating, mirror package, exterior mirrors elect. foldable, interior mirror with automatic anti-dazzle function, socket (12V connection) in the luggage/cargo area, technology package, USB ports, inductive charging cradle for smartphone Further equipment: Sliding door rail cover, vehicle color, airbag on the passenger side can be deactivated, airbag on the driver/passenger side, ambient lighting, anti-slip regulation (ASR), exterior mirrors elect. adjustable and heated, both, exterior mirrors in vehicle color, DAB tuner (digital radio reception), design and equipment line Progressive, door sill trims with Mercedes-Benz lettering, windows for rear doors / tailgate with wiper / washer system, power windows sliding doors, parking brake electric, luggage net / bag on front seat backrest, luggage compartment cover / roller blind, glove compartment lockable, tailgate with glazing, tailgate strip chrome, rear window heated, infotainment system: Mercedes me connect, interior trim: decorative trim in silk matt silver, interior lighting LED, interior mirror, interior trim elevated design, Isofix mounts for child seat in the rear seat, body: 5-door, folding table integrated in the driver and front passenger seat backrest, instrument cluster with color display, communication module (LTE) preparation Mercedes me connect, headrests in the rear (3-way), fuel filter with water separator, radiator grille chrome, lumbar support seat front left, steering wheel with multifunction, steering column (steering wheel) mech. adjustable, Mercedes-Benz emergency call system, center airbag in front, engine 1.5 Ltr. - 85 kW CDI CAT, wheelbase 2716 mm, rear seat backrest split / foldable, low emission according to emission standard Euro 6d, gear / selector lever knob leather, windshield washer tank large design, sliding door cargo / passenger compartment left, sliding door cargo / passenger compartment right, sliding door left with window, sliding door right with window, side airbag (sidebag) and window bag in front, side airbag (sidebag) in front, side windows rear fixed, side windows rear and rear window tinted, seat front left height adjustable, seat front right height adjustable, seat cover / upholstery: Artico leather-look / Dinamica, smartphone integration package, sun visor left with mirror, sun visor right with mirror, start/stop system, socket (12V connection), bumper in vehicle color, carpeting in the passenger / cargo area, carpeting in the passenger area, door handles outside in vehicle color, pre-equipment Remote Service Plus, pre-equipment traffic information system Live Traffic, warm air duct to the passenger compartment, warning system / status display for seat belts in the rear, heat protection glazing, auxiliary heater

Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, controller manufacturer: KUKA, controller model: KRC4, laser type: fiber laser, laser source model: TruDisk 4001, type of cooling: water, Equipment: cooling unit, documentation/manual, dust extraction, safety light barrier, - Trumpf TruLaser Weld 5000 - 2021/2022 Year Model - Advanced "turnkey" robotic welding cell - 6-axis industrial robot arm - Enclosed safety housing - Multi-weld techniques & Intelligent Assist System to detect workpiece placement - AI Welding Robot - Serial No. 1422667 - Robot Gantry / Linear Unit KUKA KL 4000 - Serial No. 153080 - Two Axis Workpiece Positioner Model DKP-400 V5 -Serial No. 154987 - TruDisk 4001 - High-power solid-state disk laser source - Serial No. L5211E3364 Gkjdpfxezy T Tzo Akyec - Technotrans Fluid/Water Chiller System Model RL 16/0 SK V2 NEC Grav MIZ 1" - Serial No. 40000135731 - KUKA Robot Controller KRC4 -Serial No. 3121117 - Rittal TopTherm Blue E Wall-mounted cooling system - Serial No. 2021K000144111 - Camfil Air Pollution Control Dust Extraction System - Model MF 8-8 A2 Serial No. 10011175 - Two Station Index Rotary Positioner - Equipment available after project completion, available from October 2026 - Within the machine price: Machine operational software comes with the machine - Available at additional costs: Programming solution software available - Other opportunities at additional cost: Extensive Research data library available for weld parameters including some structurally tested and certified parameters. Operator & programmer training available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Manufacturer: KRAUSS MAFFEI Type: KM 120-380 EX Gjdpezyn Igofx Akyokc Control: MC5 Year of manufacture: 2008 Operating hours: 10113 h Technical data, clamping unit Clamping force: 1200 kN Tie bar spacing h x v: 470 x 470 mm Platen size h x v: 780 x 735 mm Minimum mold height: 200 mm Maximum mold height: 450 mm Maximum mold thickness: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 125 mm Tool weight: 1485 kg Technical data, injection unit Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Injection rate into free air: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 6 m x 1.7 m x 2.19 m Total weight: 9700 kg Equipment • Screen display in German • Screen display in English • CEE socket 16A • Hydraulic core pull, 2x • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 12 interface • Schuko socket 10A

Condition: used, mileage: 34 km, power: 96 kW (130.52 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: automatic, number of seats: 9, total length: 5,981 mm, total width: 2,533 mm, total height: 2,448 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4029.NW26.TL09575 ---- Gjdpfxezkdkxs Akyokc Errors and prior sale excepted! Compoint conversion to MTW * Siren, emergency lighting system * 3rd rear marker light * Digital radio SPECIAL EQUIPMENT * Tow hitch - fixed, 13-pin socket - incl. trailer stabilization (TSC) * Anti-theft alarm * Rear air conditioning - rear water heater - automatic climate control * Technology Package 6P: exterior mirrors with turn signals, electrically adjustable, heated and foldable; blind spot assist incl. cross-traffic alert; audio system; fog lights; LED downlight; pre-collision assist, camera- and radar-based; rear collision warning system; lane keeping assist; traffic sign recognition system; enhanced park pilot system front and rear; adaptive cruise control with stop & go function; surround view camera; navigation * Rear seat backs, tilt-adjustable - incl. headrests and armrests to the aisle * Sliding door, left * Stationary heater package 2 - stationary heater (fuel-powered auxiliary heater), programmable, incl. remote control, incl. 2 batteries and anti-theft alarm ADDITIONAL EQUIPMENT * 1 battery * 12-inch multi-function display and Ford SYNC 4 with extended voice control; Bluetooth hands-free system; USB interface; SMS read-out and sending function; integration of storage media (e.g. USB sticks or MP3 players) for playing music; emergency call assistant; Ford Power-Up software updates (over-the-air update technology) * ABS, EBD, ESP, TCS * Increased axle load, front to 1850 kg * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Extended battery life * Floor covered with rubber, full vehicle length * On-board computer * Brake light, third * Roof, medium * Headliner * Double-wing rear door/180° opening angle (with window) - with heated rear windows, rear window wiper incl. washer nozzle and automatic activation when reversing * Tachometer * Vehicle modem - incl. live traffic information and WLAN hotspot 5GModern - information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the Ford App - current traffic information in real time (in connection with navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Windows, 2nd row: side windows fixed * Power windows, front * Parking brake, electronic * Ford Easy Fuel * Windshield, heated * 8-speed automatic transmission * Glove compartment with locking lid * Interior lighting * Interior mirror * Fuel tank 70 l * Paint: solid paint * Cargo area lighting * Driver fatigue and attention warning system * Technology Package 2 * Diesel particulate filter * Wheel covers * Wheels: steel 6.5 J x 16 with 235/65R16 * Windshield wipers with rain sensor * Headlights, low beam/daytime running lights * Sliding door, right * Side wall paneling, low * Power steering * Seat belts * Rear seat package 4 - 3-seater bench, narrow, in 2nd row, expandable, with three height-adjustable headrests, 3-point seat belts, with one ISOFIX bracket - 3-seater bench, wide, in 3rd row * Seat package 8A - driver's seat, 4-way adjustable - passenger double seat - passenger seat, 2-way manually adjustable - headrests, height-adjustable - driver's seat & passenger seat (outer seat), individually and variably heated - table on the passenger double seat (fold-out) - interior armrest, driver - lumbar support, driver - seat cover: fabric

Condition: good (used), 12V, 50Hz, 5A Application: Water treatment plant Width: 175 mm Height: 125 mm Godpfszddbljx Akyekc Depth: 75 mm Weight: 548 g Condition: good, second-hand

Condition: excellent (used), mileage: 425,359 km, power: 265 kW (360.30 HP), first registration: 01/2001, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, total length: 9,700 mm, total width: 2,530 mm, total height: 3,030 mm, Year of construction: 2001, = Additional options and accessories = Godpfozdlp Aex Akyokc - PTO = Notes = BELGIAN TRUCK, EX-FIRE DEPARTMENT 8000 LITER STAINLESS STEEL WATER TANK + MP10-1000 BRICK PUMP, 2003 PERFECT CONDITION = Further information = Technical information Number of cylinders: 6 Axle configuration Front axle: Steered; Suspension: Leaf spring Rear axle 1: Twin tires; Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 11,485 kg Payload: 14,515 kg GVW: 26,000 kg Maintenance, history and condition APK (Technical inspection): valid until 07/2027 Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for more information.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,760 h, functionality: fully functional, For sale: professional abrasive waterjet cutting machine MAXIEM 1530 by OMAX Corporation. Fully operational, ready to work. Technical specifications: - Work envelope X-Y: 3,100 × 1,575 mm - Pump: OMAX P2050V Direct Drive 30 HP (22 kW), up to 50,000 PSI (3,450 bar) Gedpfsy Hgrmjx Akyokc - Control: IntelliMAX Basic with CAD/CAM - Drive: closed-loop, hardened precision ground shafts, linear encoder - Traverse speed: up to 20 m/min - Accuracy: ±0.13 mm - Z-axis: motorized Included accessories: - Terrain Follower, Optic Locator - 200 L abrasive delivery system - Basic tool box kit - Tool cabinet

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: Gkedpfx Aoy I Tq Sekysc - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Year of construction: 1997, condition: good (used), Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun, cooling unit Gkjdpfx Ajzcwu Njkyoc -Manufacturer: Deltatherm, water cooler Type: DE-HI -Power: 1.7 kW -Individual components: see photos -Dimensions: 1300/800/H1760 mm -Weight: 321 kg

Condition: used, For sale: Complete washing and flotation system with water post-treatment. This system is used to remove and dewater sludge (mud, fine sand, clay, and other solid materials) from wastewater. Manufacturer = Tecnicas Hidraulicas S.A. (TH), a Spanish company specializing in wastewater treatment and sludge dewatering systems. Consisting of: Gksdpfx Aezbrp Sjkyoc - Washing drum: 2.4 m diameter; Length 4.5 m + 1.7 m - Construction material: Creusabro 4800 steel, 12 mm thick (Similar to Hardox) - Separation and flotation drum with 2 dewatering screens, collection tanks, and associated Warman pumps = top quality. - Lamella thickener tank, 4.5 meters diameter, with pump - EPS mixer - Archimedes screw - Water tank / reservoir, 10,000 liters - All necessary and associated Warman pumps and conveyor belts. Applications: Mining industry Dredging operations / dredged sludge Concrete industry Glass industry

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Gjdpozbz Evefx Akyjkc Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.