Used Igs Water Cleaner for sale (7,855)

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not a Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C. Dsdpfxefdkcgo Ac Heci TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel, forklift adapter possible - Covers made of stainless steel - Magnetic descaling device - Incl. frame for water tank, water tank 500 l - Incl. basic accessories such as 20 m high-pressure hose, spray gun, lance and flat jet nozzle 25° - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available upon request.

Condition: like new (used), Year of construction: 2016, operating hours: 1,275 h, functionality: fully functional, machine/vehicle number: W09FAL226GMF14035, operating pressure: 2,500 bar, total length: 3,750 mm, high-pressure hose length: 2,000 mm, total height: 2,040 mm, total width: 1,980 mm, empty load weight: 1,980 kg, fuel: diesel, Equipment: chassis, Falch Trailer Tandem Trail Jet 125, equipment can also be sold individually. ATTENTION: A sedimentation system, model cont. sed 100.100 from Falch, can be purchased separately; price upon request. Extensive accessories, see photos. Dcjdpfezdy Imex Ac Hei Used Falch Trail Jet 125 high-pressure cleaner with a working pressure of 2500 bar. The unit is in very good technical condition and ready for use. The following components are included with the unit: - 3 high-pressure hoses from Falch, 1 loose, 2 on the frame - 1 control line for connecting the Falch gun - 2 rotating 4-nozzle heads from Falch - Falch spray gun - Whel Fan 2, year of manufacture 2020 - Floor cleaner Scater 25 260 vc - Additional accessories for the machine: seal kits, filters, etc. Technical data: Year of manufacture 2016, with only 1275 operating hours. The unit allows adjustment of the working pressure.

Condition: like new (used), 2021, 264 operating hours, like new Dodpfxjy Aguaj Ac Hjci

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Dcedpfxjwy Ello Ac Hji

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Dcedowz Scaepfx Ac Hji

Condition: new, machine/vehicle number: G-CL-270-FN-EC-EX, functionality: fully functional, input voltage: 230 V, volume flow: 270 m³/h, noise level: 61 dB, total height: 755 mm, total length: 400 mm, total width: 500 mm, overall weight: 60 kg, ISI G-CLEANER - ATEX Mechanical air filter device (without intake plate / separate determination) Type: 270 FN Version: Mobile Control: without ATEX: "e" II 3 G Zone 2 Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas in the EX area. TECHNICAL DESCRIPTION: Air volume: - 320 m³/h (free blowing) - 240-270 m³/h (effective) (depending on the filter configuration without capture elements) Dedpfovrykhex Ac Heci Air inlet: exhaust air sound box at the rear (optionally 1x100mm / 2x80mm / 4x50mm) Filter configuration: - aluminum mesh coarse filter - Z-Line filter F9 - activated carbon cassette with pressed, specially impregnated shaped carbon ATEX: Group II Gas/dust Fan: according to ATEX II 2G Exh IIB T4 Gb Temperature class: T4 > 135°C Fan: device category 2 Filter system: device category 3 All electrical components are supplied in explosion-proof design. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Noise level: 61 db (A)) Dimensions: length 400 mm / width 500 mm / height 755 mm Weight: 60 kg

Condition: new, machine/vehicle number: S-CL-100-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 134 m³/h, total height: 475 mm, total length: 250 mm, total width: 250 mm, overall weight: 17 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Djdpfjwpu Twjx Ac Hjci Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Condition: new, machine/vehicle number: G-CL-350-FR-EC, input voltage: 230 V, volume flow: 350 m³/h, noise level: 61 dB, total height: 600 mm, total length: 430 mm, total width: 340 mm, overall weight: 40 kg, ISI G-CLEANER Mechanical air filter device Type: 350 FR Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gaseous substances. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 350 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: top rear with 4 connections 50 mm Filter configuration: - Pre-filter mat F 5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of pressed, specially impregnated shaped carbon Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Dodpfx Ajvrygpsc Hoci Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 61 db (A) Dimensions: length 430 mm / width 340 mm / height 600 mm Weight: 40 kg

Condition: new, machine/vehicle number: D-CL-440-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 450 m³/h, noise level: 58 dB, total height: 1,430 mm, total length: 450 mm, total width: 550 mm, overall weight: 50 kg, Equipment: rotational speed infinitely variable, type plate available, ISI D-CLEANER Mechanical air filter device (dust) Type: 440 FR Dodpfevrxc Asx Ac Hjci Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for dust separation. TECHNICAL DESCRIPTION: Air volume: - 450 m³/h (free blowing) (depending on the filter configuration without collection elements) Air inlet opening: baffle plate as pre-separator Intake nozzle: 100 mm (on the left side) Filter configuration: - filter cartridge (dust class M according to DIN EN 60335-2-69 Appendix AA) - compressed air cleaning via rotary vane nozzle Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 450 mm / width 550 mm / height 1430 mm Weight: 50 kg

Condition: new, machine/vehicle number: S-CL-250-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 250 m³/h, total height: 600 mm, total length: 340 mm, total width: 430 mm, overall weight: 35 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Dcjdpfevrylfex Ac Hji Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Condition: new, machine/vehicle number: C-CL-360-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 390 m³/h, noise level: 58 dB, total height: 1,190 mm, total length: 900 mm, total width: 550 mm, warranty duration: 12 months, Equipment: type plate available, ISI C-CLEANER Mechanical air filter device Type: 360 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas and solids. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 360 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: with baffle plate as pre-separator Filter configuration: - Filter cartridge made of polyester fleece (dust class M) - Pre-filter mat G4 - Suspended matter filter H13 - Activated carbon cassette refillable with 3 kg In order to achieve a consistent suction power, the filter cartridge can be cleaned at regular intervals using compressed air via a ball valve. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 900 mm / width 550 mm / height 1190 mm Dedpfovrw T Hjx Ac Heci

Condition: reconditioned (used), Title:RHOSS TCHVBZ 2630 – 621 kW Water-Cooled Chiller | Bitzer Screw | Refurbished Headline: Industrial-grade Rhoss water-cooled chiller, fully refurbished and field-tested. Equipped with 2× Bitzer screw compressors, Carel Smart Controller, and energy-efficient R-134a refrigerant — engineered for demanding industrial cooling applications. TECHNICAL SPECIFICATIONS Specification Value Brand / Model RHOSS TCHVBZ 2630 Type Water-Cooled Chiller Condition Refurbished / Tested Cooling Capacity 621.6 kW (534,500 Kcal/h) Refrigerant R-134a Compressors 2 × Bitzer Screw CSH8581-125Y-40P Evaporator Shell & Tube – DN150 Connection Condenser Shell & Tube – DN125 Connection Control System Carel Smart Controller Dimensions (mm) 4070 × 1300 × 1960 Weight 3,297 kg Location Seyhan / Adana, Türkiye TECHNICAL OVERVIEW Industrial-grade Rhoss water-cooled chiller — fully refurbished, field-tested, and verified to meet international performance standards. Equipped with high-efficiency Bitzer screw compressors and a Carel Smart Controller for stable, energy-efficient, and long-term operation. Optimized for demanding industrial applications where reliability and uptime are critical. WHY CHOOSE THIS UNIT Fully refurbished and performance-tested Equipped with high-efficiency Bitzer screw compressors Reliable and durable for continuous industrial operation Energy-efficient R-134a refrigerant Backed by professional after-sales service and spare parts inventory Fast commissioning and on-site technical consultation available ABOUT ÖZSAYIN COOLING SYSTEMS With more than 40 years of experience in industrial refrigeration, Özsayın Cooling Systems provides complete turnkey solutions: Supply of new or refurbished chillers (10 – 2,500 kW) Short- and long-term rental options On-site installation, commissioning, and maintenance Extensive spare parts inventory for global brands (Carrier, Trane, Daikin, York, Bitzer, Rhoss, Climaveneta, McQuay, etc.) Dcodpey Umf Nofx Ac Hoi 24/7 technical service and engineering consultancy RENTAL OPTION AVAILABLE This unit is available for short- or long-term rental under flexible terms. Contact us for a customized quotation and technical consultation tailored to your project requirements. CONTACT Mr. Samet Özsayın – Özsayın HVAC Technologies Seyhan / Adana, Türkiye Last Updated: 26.08.2025 HASHTAGS / KEYWORDS #ozsayin #bitzer #rhoss #watercooledchiller #industrialchiller #r134a #coolingsolutions #hvacturkey #chillerrental #refurbishedchiller #screwcompressor #carelcontroller

Condition: used, Parts cleaning system from renowned Austrian company Machine comes from company liquidation, was in operation until the end. Cleaning agents are included. Dsdpfxevcrutj Ac Hsci

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Dedpfxerivv Ee Ac Hsci Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min Dcedpfxsxgua Aj Ac Hoi • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm Dodpfx Asxgumcsc Heci - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Dodpeh Dxqvsfx Ac Hoci Inclusive pumps, Control and other accessories. Nice condition

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted Dcodpfxsnab Rlj Ac Hoi - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Dcsdpfonab Rzjx Ac Hei Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Dedpjnab Sisfx Ac Hoci Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€) Dcedpfx Asi Hckroc Hsi

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Dcsdpjyr H Anefx Ac Hei Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: ready for operation (used), functionality: fully functional, total length: 1,100 mm, total width: 1,300 mm, total height: 1,600 mm, input voltage: 380 V, load capacity: 500 kg, empty load weight: 550 kg, Equipment: documentation/manual, Chamber washing system with rotary rack. Max. workpiece weight 500 kg, basket size 74x74 cm, max. workpiece height 66 cm. Includes loading trolley and cleaning powder. Operating manual available. Dcsdpfxjymggvo Ac Hsi

Condition: new, Year of construction: 2025, Technical Parameters Model: RST-FLC-2000W/3000W Laser: Raycus fiber laser Laser power: 2000W / 3000W Laser wavelength: 1064nm Frequency: 10–50 kHz Cooling method: Water cooling Cooling water: Deionized water Water temperature: 23–26°C Net weight: 160kg (2000W) / 200kg (3000W) Dimensions: 98 × 122 × 143 cm Total power: 2000W / 3000W Scan width: 10–80 mm Mode of operation: Handheld or automatic Operating temperature: 0–40°C Price Fiber Laser Cleaning Machine RST-FLC-2000W/3000W Djdpfx Aswznqgoc Hsci Connection: 230V / 380–400V – 3PH 50Hz RAYCUS 2000W (230V)……….€12,500 RAYCUS 3000W (380V)……….€15,500

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Dodpsw Ix Dpsfx Ac Heci Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)