Used Water Goblin for sale (7,431)

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone. Fodpszg Tzxefx Akyepn

Condition: ready for operation (used), * Brand: HEPU Fpedsywmlzspfx Akysn * Model: freshwater pump * Driving: 22 kW E-motor

Condition: used, Year of construction: 2005, Working area 4000 × 2000 mm Vertical movement 250 mm Max. Thickness 80 mm Control: Osai 10/510 ANL Fpjdpfx Aszgaq Tokyjn Pump: Streamline SL- V 50

Condition: good (used), Year of construction: 2000, Automatic Sheet Feeder Fjdpfx Aoh H Dqhjkyjpn Automatic Laminating Unit EK 130/180 Automatic BAT Sheet Seperator Automatic Stacker Format: 1300 x 1800 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Fpsdjrp D I Ispfx Akysn Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. Fpjdpfxeq U Irmo Akyjn We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: used, Year of construction: 1987, Max. Sheet Size X : 760 mm Fpjdpfx Aksikq Hhjysn Max. Sheet Size Y : 1020 mm Min. Sheet Size X : 320 mm Min. Sheet Size Y : 460 mm Production Capacity Max : 35 m/min Technical data can vary according to job, consumables and possible other factors

Year of construction: 2014, condition: good (used), Technical Data – Condenser Maximum volume flow rate: 300 m³/h Maximum condenser dimensions in delivered condition: approximately 430 mm x 1610 mm high, cylindrical part: approximately Ø 273 mm Weight of the chamber in delivered condition: approximately 80 kg Fpedjcpwhbepfx Akyon Capacity of the upper part (condenser): approximately 30 L Capacity of the lower part (collection container): approximately 28 L Material of elastomers: NBR/FKM/PTFE Maximum condenser temperature: 1 to 80 °C Maximum condenser vacuum: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Maximum heat exchanger temperature: 1 to 80 °C Heat exchanger working fluid: water Maximum water pressure in heat exchanger: 10 bar Material of heat exchanger: tin-plated copper Material of condenser: stainless steel For technical questions or other sizes, please inquire.

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Fjdpeit Rrvjfx Akyopn

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Fpjdetynfgopfx Akysn Price from €uro 250.000

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 400873, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, pump power: 2,200 W, sheet thickness steel (max.): 120 mm, The machine was overhauled in 2026 and is serviced every 500 operating hours! TECHNICAL DETAILS Working area, X-axis: 1,500 mm Working area, Y-axis: 1,500 mm Cutting capacity, steel: 120 mm (recommended: 60 - 80 mm) Cutting capacity, aluminum: 120 - 200 mm Cutting capacity, plastic, stone, etc.: unknown MACHINE DETAILS Pump power: 22 kW (30 HP) Last pump overhaul: 3 operating hours ago Machine dimensions (L x W x H): 2,500 x 1,900 x 1,500 mm Fjdpfxey Nmtve Akyopn EQUIPMENT Spare parts Computer Water softening system

Condition: good (used), Waters Type: Synapt G2-Si SYNAPT G2-Si mass spectrometry (TOF with ion mobility) New possibilities for discovery in your laboratory Data, data processing, and groundbreaking performance. SYNAPT enables the detailed characterization of complex mixtures and molecules with uncompromising qualitative and quantitative performance, optimized workflows, and a platform of unparalleled versatility. Ultimate UPLC/MS/MS performance Powerful data-independent and data-dependent solutions CID and ETD fragmentation Wide range of experimental options Upgrade to three separation dimensions! Condition: used Fsdpszhkcvefx Akyepn Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16074, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Automatic Sheet Seperator TM -4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Fedpezimygsfx Akyjpn Automatic Stacker S-3 Airjet-Dryer

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit BAT 102 Automatic Stacker S-3 Max. Sheet Size X : 1020 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min Fedpfozv S R Djx Akyepn

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. Fpjdpfjzwpfhsx Akyen If you have any questions or need more information, please send us a message or call us.

Condition: refurbished (used), 100 m³ / 100,000 l fire water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 16,300 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single or double-walled, suitable for areas that can be walked or driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! The container has been emptied, cleaned, overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319, design B, without a gauging port. - Ventilation flange stub with a cap, overall length approx. 1,300 mm, suitable for 800 mm soil covering and 500 mm above the ground. - Externally coated with bitumen for protection. - On request, we can coat the tank with an internal coating based on bitumen or epoxy resin (against corrosion). - It is also possible to line the container with a plastic inner liner. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will promptly receive the exact freight costs. Inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can accept and purchase tanks/containers of all types; please contact us for details. We also have the following sizes in stock: Fodohh Suhspfx Akyopn - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 20,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 20,000 liters / 20 m³ Length: approx. 6,840 mm Diameter: approx. 2,000 mm Weight approx. 3,500 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. Fpedpovmz D Ejfx Akyon The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. Of course, we always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,646 h, functionality: fully functional, machine/vehicle number: 20360, Available for inspection in operation at our production facility. Waterjet cutting machine 6x3m, 1x2.5D cutting head, incl. HD pump 4000 bar, stainless steel cutting tank, abrasive remover. Purchase date 03-12-2013 Serial number 20360 Model Resato ACM 3060 Operating hours 26,646 hours (as of 24 October 2025) XY working range machine 3020 x 6020 mm Precision in X or Y axis +/-50 µm Maximum gap between bridge 210 mm +/- 10 mm Z-axis range -220 – 0 mm Maximum working pressure 4000 bar Minimum speed 1 mm/min Speed range 1 – 30,000 mm/min Maximum acceleration 500 mm/s2 (acceleration depends on cutting process) Ambient temperature 12 – 32°C Relative humidity 30 – 80% General protection class IP54 Specific protection class IP65 Voltage-frequency 1x 230 ± 5% VAC, 50-60Hz Electrical connections 1 x 16A + N + PE Operator panel 17’’ touchscreen, color Network/internet connection RJ45 socket Communication 100BaseT CAT5e Slat load capacity 1000 kg/m2 Floor load 5 N/mm2 Air connection Quick coupling, type Orion Fedpfx Aexu U Nmokyepn Air quality Dry and filtered air Dew point at 3°C at 7 bar Min 7 bar, max 12 bar 30 Nl/min Required floor flatness Max 15 mm deviation over 6 meters Typical sound pressure level 87 – 92 dB Special details The tank was originally plastic but has been modified to stainless steel Pump specifications (optional extra pump available as spare) PJ4-4000 – Resato Waterjet Centix ID: 601194 Model: Resato Powerjet 4000 Serial number: 18996 Purchase date: 26-11-2012 Max. capacity: 3.8 L/min Max. pressure: 4000 bar Max. power: 30 kW Number of intensifiers: 1 Low noise level:

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. Fpsdpfx Ajxvca Ajkyen 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Model: Smartline 2040 Fpsdpfx Akjydpmgeyon Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Fpjdpjwqlmdofx Akysn

Condition: used, Year of construction: 1900, functionality: fully functional, volume flow: 6,600 m³/h, final pressure: 2.5 bar, power: 610 kW (829.37 HP), input voltage: 6,600 V, input current: 69 A, type of input current: AC, 2 pieces of cooling water pumps. Vertical column pipe pumps with open screw impeller Manufacturer: KSB Type: SEZ N 8-60 Impeller design: Open screw impeller Number of impellers: 1 Immersion depth: 2550 mm Shaft seal: Mechanical seal Radial bearing: RESIDUR fiber ceramic Support bearing: Segment slide bearing Cooling: Self-cooling with CuNiFe cooler Speeds: 745 / 600 / 496 rpm Flow rate: 6600 / 5750 / 4750 m³/h Delivery head: 25 / 15.5 / 10.5 meters Shaft power: 525 kW / 280 kW / 180 kW Pump efficiency: 85.7% Pumped medium temperature: 20°C NPSH: 8.0 m Casing: S235JRG2 Fedpfx Akoxb Tvxsyopn Shaft: 1.4313 Impeller: 1.4409 Impeller diameter: 766 / 571 mm Electric motor: Siemens 1LA44548 AW94Z Power: 610 kW Voltage: 6600 Volt Current: 69 Ampere Including frequency converter Dimensions: Discharge nozzle: DN 800 Pressure rating: PN 10 Pump weight without motor: 4100 kg Length with motor: 7723 mm

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Fedowm Nq Eepfx Akyspn • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI Fodpfx Ajxwtu Tjkyepn 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: ready for operation (used), KLH Kältetechnik W15.HL6 Peripheral Unit Air-Cooled Water Chiller Cooling Device Year of manufacture: 2010 Dimensions: 1100mm x 800mm x 1620mm (L x W x H) Weight: 288 kg You are welcome to arrange a viewing appointment. Fpodpoxxa Hrefx Akysn We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and have a look at our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data deviations as well as errors in the item description may occur and are reserved.