Used Water Feeder for sale (10,249)

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. Djdsrivv Eopfx Af Ijcn It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, functionality: fully functional, Specific information see in passport included. Price on request. The demineralization plant was used to treat raw water in basically four technological steps: - Water pretreatment - preheating, clarification and filtration, Dcedpfxjwwtp Tj Af Ijn - Water demineralisation is a chemical treatment in which all minerals, i.e. dissolved salts, are removed from raw (river) water. The resulting treated water is then virtually chemically pure H2O, containing only dissolved gases - oxygen, nitrogen and noble gases (carbon dioxide is removed), - Water softening stations for water treatment hot water circuits - Thermal degassing of water The demi-station technology also includes auxiliary equipment for chemical storage (storage tanks, bottling equipment ...), waste water removal (sumps, tanks ...), media transport (pumps, pipelines, storage and dilution tanks ...).

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21FW100020, The FluidWorker® 100 uses UV-C technology to reduce bacteria in machine tool cooling lubricants in an environmentally friendly and efficient way. It is also successfully used for chemical-free control of bacteria in process water systems, e.g. parts washing systems, cleaning baths, hardening coolants, etc. By using a FluidWorker 100 on the machine tank, biocides that are harmful to the environment and health can be significantly reduced. Biocides are the main cause of allergies, respiratory diseases and skin irritation among machine tool workers. The use of a FluidWorker 100 also generally increases the service life of cooling lubricants by at least 30%, thus saving costs for the replacement and disposal of coolants. Dsdpfx Aeqvzx Nsf Iscn The FluidWorker® 100 works in the bypass on the machine tank. The necessary installation accessories are included in the package.

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: Dodpfx Asl Axtgef Iecn You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Year of construction: 2009, condition: used, Operating temperature: 110c Pressure difference: 50kPa (0,5 bar) Dsdpfx Afog Tn Eaj Iecn Clearance: 0,70 mm Filling grade: 20% Capacity: max. 20m3/h Power: 4 kW/400V/50 Hz Rotary Feeder Laitex 500/400 - HST in very good condition.

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar Dcjdpfx Afovllbrj Ion All manuals and documentation available

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling liquids, pastes, creams, oils, etc. Suitable applications include: - Disinfectant - Shampoos - Creams - Honey - Jam - Milk - Yogurt - Water - Alcohol - Bdtm022b3pj - Pesto - Etc. This is a robust machine that operates on air and 220V power, truly plug and play! Perfectly suited for small batch filling. Even a very small compressor is sufficient to run this machine. Optionally, a compressor can be supplied. The filling machine is equipped with a 500ml cylinder, allowing for a maximum fill of 500ml per cycle. By running multiple cycles, larger volumes can be filled as well. The minimum fill per cycle is 50ml, so anything between 50ml and 500ml can be dispensed in a single stroke. It features a large 25L hopper. Optionally, it can be connected directly to an IBC or a 200L drum for even faster large-quantity filling. The machine comes with both a foot pedal and an auto mode. In auto mode, it will continuously fill, enabling easy and fast filling of larger batches. Using the foot pedal, operators can control the pace themselves. Depending on the operator and fill volume, 15–25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15–20kg and can easily be placed on a table. It is constructed entirely from high-quality stainless steel, ensuring excellent durability. If you have any questions, please contact us by email—we would be happy to help with this or other machines. We also supply a labelling machine that forms an excellent combination with this filling machine. We aim to respond within 24 hours and are available on working days between 09:00 and 17:30. Dcjdsrivwfjpfx Af Ion

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Dodpfeh R Tvtsx Af Iscn

Condition: ready for operation (used), machine/vehicle number: CRS00003950, Condition Used Stock Number 50208.1515 This listing is for the Veolia/Elga PC1ANRXM2 Purelab Choruss The unit is in full working condition and is ready for immediate release Dodpowf Tbljfx Af Ijcn The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Djdpfx Afjwd Nths Iocn Conveyor height is adjustable VFD on conveyor drive

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed Dcedpfxsnab Rze Af Ijn - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) Dcsdpfx Aonab Rlof Ien - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted Dcedjnab Siepfx Af Ien - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: reconditioned (used), functionality: fully functional, Rabolini mod. Imperia D, with feeder unload, with Hot Foil System 2 advances Size 80/120 cm, Pneumatich clutch, Lateral register square 3 work mode, 6 sector HOT PLATE Original HOT FOIL SYSTEM WITH 2 advances, Feeder original RABOLINI, Review machine. Dcodpfstp T Hxox Af Ion

Condition: excellent (used), loading space volume: 29 m³, first registration: 07/2014, Year of construction: 2014, = Further Information = Unladen weight: 7,060 kg Payload: 30,940 kg gross vehicle weight: 38,000 kg Number of compartments: 1 Water installation: Yes Technical condition: very good Visual condition: very good Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: Dodpowxx N Usfx Af Iocn MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber. MOB: Dutch) Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details listed on our website. If you have received any different information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Year of construction: 2011, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S071361/01, USED GODWIN 12 INCH PUMP MODEL : CD300M SERIAL : S071361/01 ENGING MODEL : CATERPILALR C9 Dcodpfxjxiwawe Af Isn ENGINE SERIAL NO : JSC22260 YEAR : 2011 HOUR : 7.8hrs

Condition: used, Year of construction: 2000, Book block feeder Solema Fastbook + Autoload Year: 2000 This automatic book block feeder can be used with hard cover book lines, perfect binders or back gluing machines, etc. - Autoload Dcjdpfjwwg T Esx Af Ion

Condition: good (used), Year of construction: 2007, I will sell a feeder for salt, feed, etc. Dcjdpfxev A Rqmo Af Ien

Year of construction: 2025, condition: new, functionality: fully functional, Ice water facility L 100 model Recommended batch size up to: 30 liters Continuous output * (cooling output): 60 liters Peak cooling performance * with ice bank: 180 liters / h Ice bank: 20kg Cooling capacity (CECOMAF) t = -5 ° C: 1189 W Voltage: 230V; 50Hz Power consumption: 575W Water connection: 1/2 " Water flow at 2 bar: 8 liters / min Device dimensions L x W x H mm: 950 x 530 x 560 Weight empty / operation approx .: 60kg / 130kg Energy consumption at 100 liters: 1-2 KWh NEW device with warranty Dcedpfx Aofmciksf Ijn * with + 17.5 ° C inlet and + 2.5 ° C outlet. Technical changes reserved. Option: Underframe Visit us at the Milbrandt outlet shop

Year of construction: 2014, operating hours: 3,096 h, condition: excellent (used), functionality: fully functional, (Take advantage of the occasion: equipment already reduced by 20%) Dodpsxlua Hsfx Af Iecn 1 Carrier water chiller, model: 30RB0202-B, cooling only, 193 kW (165,980 frig) power consumption 94 kW, refrigerant R410A, with shell-and-tube heat exchanger, 4 axial fans, 3 scroll compressors, weight 1,824 kg, dimensions: 2420x2240x2320 mm Compressor operating hours: 77, 83, and 3,096 respectively. Equipment tested with full refrigerant charge, with warranty, shipping to all of Spain Reference: 1139

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper Dcedpfx Asxg Hrkof Ijn - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: as good as new (ex-display), Year of construction: 2014, Material length 1,500 - 2,000 mm Dedpfx Aoui Hpaef Iscn Remaining piece length max. 600 mm

Condition: not inspected (used), Year of construction: 2002, This feeder was delivered to us in working condition by a customer during the sale of a machine. We are selling this feeder separately. The feeder works, but it needs to be thoroughly inspected. Dcjdexlndfjpfx Af Isn

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails Dcedpfx Afsxlm Nye Ijn 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 27-230 112/R 588 336, bar length: 3,200 mm, bar diameter: 80 mm, total length: 3,200 mm, FMB Maschinenbau TURBO 8-80XT/3200/A – High-performance bar feeder magazine Dodpfewtq I Sjx Af Iscn Powerful and reliable bar feeder specifically designed for automatic feeding of bar material into CNC lathes. Maximum bar length: 3200 mm Diameter: 80 mm