Used Warm Hold Counter for sale (5,039)

Condition: not inspected (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 4619, Gubisch UFA with 4 spindles, Guedpsznkyuofx Ak Uog 1st spindle: synchronized rotation 2nd spindle: counter-rotation 3rd spindle: counter-rotation 4th spindle: counter-rotation Working height 115 mm, Spindle speed 6,000 rpm, Spindle diameter: 1 x 30 mm and 3 x 40 mm, Largest working diameter D = 220 mm, Smallest working diameter 100 mm, Total power consumption 19 kW, 380 V, 50 Hz, Weight approx. 1,850 kg, in “as is” condition, as inspected, available from the Seevetal warehouse, Ex works, excluding transport, subject to prior sale.

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): Gedpfjx D E Hbex Ak Ueug • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine Gjdey Saqgepfx Ak Uoug - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Gedpfx Akjzutras Usug Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup Gujdpsy Samuefx Ak Ueg - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Guedpfetugggsx Ak Usg Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Gsdpfezcymhjx Ak Ueug Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Includes delivery & inst

Condition: used, Year of construction: 2002, gebraucht 2002 090129 prompt, Zwischenverkauf v Türkei 27800 € 1 Gujdpfjx Urrhsx Ak Uog 3100 mm 10 mm 350 mm 10 1/min 1.5 ° 1000 mm 22 kW 3800 mm 3600 mm 2000 mm 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Year of construction: 2023, machine/vehicle number: VT0620, functionality: fully functional, operating hours: 174 h, High-Performance Machining Center SPINNER VC850 Travel ranges X850, Y510, Z510 mm "Advanced" configuration variant with patented guideway cover design Base machine configured as VC850-5A Including rotary-tilt table D=350mm High-performance milling spindle up to 12,000 rpm Power 22.6 kW / 108 Nm as built-in hybrid spindle with direct drive (no belt) This results in a particularly low machine height of only approx. 2,420 mm Spindle tool interface SK40 DIN69871 TOOL MAGAZINE with 48 tool stations MAGAZINE DOOR pneumatically operated within the work area DIRECT MEASURING SYSTEMS on X/Y/Z axes HEIDENHAIN TNC640 control, height adjustable, with angle-adjustable keypad: - Path control with 19" multi-touch screen in stainless-steel design PORTABLE HANDWHEEL HR510 FS "Advanced Function Set 3" option number 21 "CAD Import" option number 42 "KinematicsOpt" option number 48 "Advanced Function Set 1" option number 8 "Advanced Function Set 2" option number 9 "Touch probe functions" option number 17 Energy-saving function incl. automatic machine shutdown TNC 620 / TNC 640 Heidenhain software option "Heidenhain DNC" option number 18 Fully integrated 2-axis ROTARY-TILT TABLE SPRT-350 centrally mounted in the work area with: - Rotary table with faceplate D=350mm - Tilting range A-axis -110 / +46 degrees Gsdow Auryjpfx Ak Usug - Additional clamping plate approx. 200x350mm arranged to the left - Counter bearing to support the rotary table bridge - High-precision direct measuring systems centrally on both rotary axes - Hydraulic brakes per axis, holding torque 3,600Nm DUAL ROTARY FEEDTHROUGH in the center of the C-axis UNIVERSAL CHIP CONVEYOR VC850 discharging to the RIGHT from the machine PREPARATION of the spindle FOR HIGH PRESSURE for auxiliary tank use up to 70/80 bar HIGH PRESSURE TANK 70bar with paper band filter for central through-spindle flushing Blow air at the spindle head Compressed air centrally through the milling spindle Rinsing gun PREPARATION FOR SPINNER STANDARD PROBE Blum Wireless SPINDLE PROBE Spinner-Blum with tool interface matching the milling spindle Electrical PREPARATION FOR EXTRACTION AUTOMATIC DOOR for the workspace door Universal robot interface UNIROB I/O PACKAGE consisting of: 4 free M-functions with 2 PLC outputs I/O 24VDC 4 PLC inputs for feedback from the 4 M-functions Wired to terminal strip in the control cabinet STANDARD DOCUMENTATION 3D MODEL (CAM) LIFTING EYE BOLTS for crane unloading STANDARD 2-TONE PAINTING in light grey RAL7035 and blue grey RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN-system (5-wire) Notes: The price includes warranty services only within Germany. For new and demo machines, images may not necessarily represent the individual machine but rather comparable units. Depicted accessories such as clamping devices or tool holders are included only to the extent listed in the technical description. Please request a detailed ex works quotation. Visit our factory near Munich or one of our showrooms. We may also have similar machines available. Subject to prior sale.

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam Guedpfx Ajywuczok Usg  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: used, mileage: 6,800 km, power: 140 kW (190.35 HP), color: gold, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electronic window regulator - left - Electronic window regulator - right - Driver airbag Guedoy Uqy Dopfx Ak Ujg - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: B25 Electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz entry trim, CA3 Active Steering Assist, CF8 Sports suspension, CK8 Steering wheel heating, CL1 Steering wheel adjustable in tilt and height, CL3 Leather steering wheel, CM2 Bumpers and trim parts painted in vehicle color, CU4 Aerodynamics package, D14 Anodized roof rails, D34 Panoramic sliding sunroof, E07 Hill-start assist, E1D Digital radio (DAB), E1E Navigation, E1T Touchpad, E4S Smartphone integration package, E65 Burmester surround sound system, E7H MBUX multimedia system High, EI0 Wireless charging system for mobile devices, ES2 12 V socket in the trunk / cargo area, ES3 12 V sockets for rear seat rows, right and left, ET4 Active Distance Assist DISTRONIC, F2W Winter package, F3T Decorative trim elements, wood-grain optic, olive gray, open-pore, F3Z Comfort closing, F48 Heating for windshield washer system, F65 Exterior mirrors, automatically folding, F66 Lockable glove compartment, F69 Ext. mirrors electr. adj. - and heated - with integr. blinker, F71 Interior mirror, automatically dimming, FG0 Center console with roller cover, FG9 Cup holders that can be attached to the rear armrests, FH6 Instrument panel in leather-look with decorative stitching, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH4 Automatic climate control system THERMOTRONIC, HY1 Remote control for auxiliary hot water heater, HZ0 Auxiliary heater, electric, HZ7 Air conditioning system, semi-automatic, TEMPMATIC in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JF2 ENERGIZING Comfort, JH0 Widescreen Cockpit, JM2 Extended automatic restart on highways, JM3 Route-based speed adjustment, JM4 Active Speed Limit Assist, JP1 PRE-SAFE, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB5 Main tank 70 liters, L45 MULTIBEAM LED with High Beam Assist PLUS, LA2 Headlamp Assist, LC4 Comfort roof control unit, LC5 Ambient lighting in the exterior mirrors, LC6 Lighting in the grab handle, rear, with reading spot, LC7 Lighting for footwell, front, LC8 Ambient lighting, tailgate, LE1 Adaptive brake light, LE3 Ambient lighting 64 colors, cockpit + rear, LE6 Night lighting, rear, LG4 Rear, brake and indicator lights in LED technology, LP4 Projection of brand logo, MJ8 ECO Start-Stop function, MO5 EMISSION CLASS EURO 6e RDE5 M/N1 GR. II, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, MX0 BlueEFFICIENCY package, P28 EASY PACK package, electric sliding door/tailgate, P2Z AVANTGARDE Plus package, Q50 Trailer coupling, ball head, removable, Q... Metallic, sunroof, alloy wheels, electric immobilizer, ESP, navigation system, auxiliary heating, particulate filter, warranty, rain sensor, panoramic roof, electric side mirrors, sports suspension, Bluetooth, on-board computer, hands-free system, multif

Condition: like new (used), Year of construction: 2018, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 673 mm, turning diameter: 313 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 75 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 2,123 mm, total length: 3,257 mm, total width: 2,312 mm, spindle nose: 6, overall weight: 8,118 kg, spindle diameter: 250 mm, CNC Fanuc 31i TURNING SWING DIAMETER Over guide cover: 673 mm WORKING AREA Chuck size: 250 mm Bar capacity: 65 mm Maximum turning diameter: 313,7 mm Maximum turning length: 520,7 mm MAIN SPINDLE Maximum spindle speed: 4.000 rpm Maximum motor power: 26 kW Maximum torque: 421 Nm Base spindle speed: 590 rpm Spindle nose: A2-6 / 25C Spindle bore: 75 mm Maximum 3-jaw chuck size: 250 mm Spindle orientation: 1° SUB-SPINDLE Maximum spindle speed: 5.000 rpm Maximum torque: 347 Nm Base spindle speed: 420 rpm Maximum motor power: 11 kW Spindle nose: A2-6 / 20C Chuck size: 200 mm Bar capacity: 51 mm Spindle bore: 60,4 mm Spindle orientation: 1° Maximum stroke: 638 mm Maximum rapid traverse: 38 m/min Maximum distance between sub-spindle and main spindle: 654,1 mm COOLANT SYSTEM Tank capacity: 254 L Maximum pressure: 13,8 bar High-pressure coolant through turret: 68,95 bar ADDITIONAL FEATURES Resolution: 0,0001 mm Machine length: 3.257 mm Machine depth: 2.312.4 mm Machine height: 2.123 mm Machine weight: 8.118 kg Machine equipped with: • SUPER-PRECISION® certification • Air blast on main spindle • 20C collet spindle • Custom Macro B programming • Reinforced HARCRETE® machine base • Grease lubrication on all axes • Optical scales on X, Y and Z axes • 12-bar through-tool coolant system • Parts counter and operating hours counter • Axis resolution: 0.00010 mm • Maintenance kit • Manual Guide i (programming system) • Rigid tapping (without compensation holder) • Laser measurement system with Renishaw ball probe • Live tooling, Y-axis and 20C sub-spindle option Configuration includes: • Sub-spindle • 12-station BMT-55 tool turret with live tooling drive • C-axis on both main spindle and sub-spindle • Y-axis Guedpfx Ajzbicvjk Uog • Optical scale on Y-axis • Ready To Cut option (Warm-up Cycle – Automatic Start) • MARPOSS workpiece probe for BMT-55 • MARPOSS tool setter • Workpiece presence detection in the sub-spindle • Chip conveyor – discharge on the right-hand side of the machine (interface included) • High-pressure coolant system • Spindle reduction sleeve kit • Operating and maintenance manuals and CE Declaration of Conformity

Condition: used, mileage: 16,200 km, power: 120 kW (163.15 HP), color: grey, gearing type: automatic, number of seats: 8, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Gusdpfx Ajz Andysk Ueg A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CF7 Comfort chassis, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and trim in vehicle color, CU4 Aerodynamics package, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E4S Smartphone Integration Package, E7M MBUX Multimediasystem, ED4 Fleece battery 12 V 92 Ah, EL9 2-way loudspeakers front and rear, ES2 12 V socket in the trunk/cargo area, ES3 12V sockets for the rear seat rows on the right and left, F2W Winter package, F3Z Comfort door closing, F64 Exterior mirrors electrically foldable, F66 Lockable glove compartment, F68 Exterior mirrors heated and electrically adjustable, F71 Interior mirror with automatic anti-glare function, FF1 Center console with storage compartment, FJ3 Double cupholder in the center of the cockpit, FK2 Radiator grille chrome, FKB PANEL VAN, FP2 Mirror package Vito, FP4 Chrome interior package, FS5 Illuminated mirrors for sun visors, FY7 Multi-button remote control, G43 9G-TRONIC, GA7 AUTOMATIC TRANSMISSION, TORQUE 700 NM, H00 Warm air duct to passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH4 Automatic climate control system THERMOTRONIC, HZ0 Auxiliary heater, electric, HZ7 Air conditioning system, semi-automatic control, TEMPMATIC in the rear, IL5 Left-hand drive, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J2W Maintenance interval 2 years, J55 Seatbelt warning system for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Mis-fueling protection, KB5 Main tank 70 liters, L LEFT-HAND DRIVE, L45 MULTIBEAM LED with Extended Highbeam Assist PLUS, LA2 Driving lights assistant, LB9 Exit lights, LC4 Comfort roof control panel, LC6 Lighting in the grab handle in the rear with reading spot, LC7 Lighting for the front footwell, LC8 Ambient lighting tailgate, LE1 Adaptive brake light, LE6 Night lighting in the rear, LG4 Tail, brake and indicator lights in LED technology, LP2 Interior and ambient lighting, combination, M60 Generator 14 V / 250 A, M6A EMISSIONS CLASS EURO 6E-BIS M1, M72 Vehicle compatible with HVO, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limitation 210 km/h, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, P4F Rating country set Euro-NCAP, Q50 Trailer coupling, ball head, detachable, QA4 Trailer load 2500 kg, R17 Light alloy wheels 7 J x 17, 5-spoke design, RY2 Tire pressure monitoring system on front and rear axle, wireless, SA1 Seat cushion depth adjustment, driver, SA2 Seat cushion depth adjustment, front passenger, SA6 Airbag, front passenger, SB1 Comfort driver's seat, SB2 Comfort front passenger seat, SE4 Lumbar support, front passenger seat, SE5 Lumbar support, driver's seat, SH1 Thorax/pelvis sidebag, driver, SH2 Thorax/pelvis sidebag, front passenger, SH9 Windowbags for driver and front passenger, SK2 Seat occupancy recogn

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 12,000 rpm, travel distance X-axis: 505 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: OKUMA, controller model: OSP-U100L, number of slots in tool magazine: 44, number of axes: 6, This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 2000 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details. • Y-axis: yes • Through-spindle coolant (water) • Lower turret: no live tooling • Simultaneous machining: not available • Auto door • Robot interface: ready Additional equipment • SMW chucks: 10" and 8" to be supplied • Note: chucks currently installed on the machine are not included Technical Specification Counter Spindle Yes Godezhnb Aepfx Ak Uoug Driven Tools No Taper Size HSK 63 Through-spindle Coolant Yes

Condition: used, mileage: 11,880 km, power: 120 kW (163.15 HP), color: blue, gearing type: automatic, number of seats: 9, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to arrange an appointment. Mr. Kiel will be happy to assist you, phone: Gedpfx Akjyfp Efe Ueug BH1 HOLD function, C70 pedestrian protection, CF7 comfort suspension, CL1 steering wheel adjustable in height and tilt, CL4 multifunction steering wheel with trip computer, CU4 aerodynamics package, E07 hill start assist, E1D DIGITAL RADIO (DAB), E34 buffer battery for starting process, E3C Audio 30, E57 electrical wiring for trailer socket, ED4 AGM battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES3 12V sockets for rear seat rows right and left, EZ5 parking package, EZ8 PARKTRONIC, F48 heated windshield washer system, F64 exterior mirrors electrically folding, F66 lockable glove compartment, F68 exterior mirrors heated and electrically adjustable, F72 exterior and interior mirrors automatically dimming, FG9 attachable cup holder on rear armrests, FKB COMBI VAN, FP2 mirror package Vito, FR1 rear camera not retractable, FR8 reversing camera, FS5 illuminated mirrors for sun visors, FZ8 comfort opening and closing with IR remote control, G43 9G-TRONIC, H00 warm air duct to passenger compartment, H16 driver's seat heating, H20 all-around heat-insulating glass, HH9 semi-automatic climate control TEMPMATIC, HZ7 semi-automatic climate control system TEMPMATIC in rear, IN2 wheelbase 3200 mm, long overhang, J55 seatbelt warning system for front passenger seat, JA1 warning lamp for windshield washer fluid level, JF1 rain sensor, JH3 communication module (LTE) for digital services, JK3 instrument cluster with pixel matrix display, JW8 ATTENTION ASSIST, JX2 maintenance interval 40,000 km, K51 misfuelling protection, KB5 main tank 70 liters, L LEFT-HAND DRIVE, LA2 light assistant, LC4 comfort roof control unit, LC8 tailgate ambient lighting, LD9 passenger compartment light(s) in rear, LE1 adaptive brake light, LG2 LED Intelligent Light System, LG4 tail, brake, and indicator lights in LED technology, MJ8 ECO start-stop function, MK8 speed limit 210 km/h, MO6 emission class Euro 6d M/N1 GR. II, MS1 cruise control, MU4 OM 654 DE 20 LA 120 kW (163 HP) 3800 rpm, MX0 BlueEFFICIENCY package, RY2 wireless tire pressure monitoring, front and rear axle, S23 double passenger seat, SA6 passenger airbag, SB1 comfort driver's seat, SH1 thorax-pelvis sidebag driver, SH9 windowbags for driver and passenger, T14 active latch sliding door, T70 child safety locks on passenger compartment doors, T74 entry grab handle, T75 entry grab handles for driver and passenger, U3V vis-a-vis seating mounting, 1st row rear seat tracks, U73 armrests for passenger compartment seating, UR1 seat rail system with quick-release mechanism, US4 comfort 3-seater bench 1st row, outer seat foldable, US5 comfort 3-seater bench 2nd row, outer seat foldable, V23 high-grade interior trim, V36 headlining, V41 TPO plastic floor in passenger compartment, VF4 Caluma fabric black, VH1 grab handle at rear, VV9 mounting points in roof frame, W16 fixed window front left, in sidewall/sliding door, W17 fixed window front right, in sidewall/sliding door, W32 electric opening window rear passenger compartment, W65 tailgate, W70 tinted windows in rear compartment, privacy glass, W78 window in tailgate with washer and wiper system We will be happy to make you an offer for the trade-in of your used vehicle. Should you wish to lease or finance your vehicle, we are happy to provide you with a tailored offer. Errors and prior sale reserved. Mr. Kiel will be h

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position Guodjyz Dr Tepfx Ak Usg - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring Gjdpfx Aexrb Nbjk Ueug - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Gjdozmx Scopfx Ak Uoug Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: excellent (used), Henkel UVALOC 400 Loctite 97039 Curing Chamber Guedpfxezg Expe Ak Uog The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use. The device integrates the following: a control unit with an integrated power switch and operating hour counter a lamp housing with the burner reflector igniter. Includes a UV protection box. Features: Contains a 400 W metal halide lamp Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be detached from the lamp module and operated separately Adjustable lamp height for optimal irradiation With a glass filter to prevent short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm x 472 mm x 300 mm Ambient and operating temperature +10 °C ... +30 °C Storage temperature -10 °C ... +60 °C Weight ~ 11.5 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2021, condition: excellent (used), ELECTA refrigerated display case models: ELECTA 100, ELECTA 200 (corner unit), ELECTA 250 (meat) sections for meat, poultry, and processed meats PINK LED and CRIOLED lighting electronic controllers Gsdpfxozz Shgs Ak Ujug complete set of partition walls, cash register terminal, and corner element designed for professional product display. The display cases consist of 4 segments: 1 display case 315 cm, 2 display cases 315 cm, 3 display case 187 cm, 4 display case 80 cm (corner unit). The equipment has been in use for 5 years.

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Please contact us to get a hold of this machine for a super discount price! Gedpsd Tfiusfx Ak Ueug

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Guedpezrpp Aefx Ak Uog Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Guodev Srfwepfx Ak Ujg Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Gsdpfszpbazox Ak Uoug Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, mileage: 43,100 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, number of seats: 9, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Gusdpfxozyf A Us Ak Uog !!!HAIL DAMAGE!!! B25 Parking brake, electric, BA3 Active Brake Assist, BB6 Brake force compensation in case of brake booster failure, BB7 CO2-optimized braking system, BH1 HOLD function, C6L Multifunction steering wheel, CF7 Comfort chassis, CL1 Steering wheel adjustable in inclination and height, CU4 Aerodynamics package, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E57 Electrical system for trailer socket, E7M MBUX Multimedia System, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F3Z Comfort closing, F48 Heating for windshield washer system, F64 Exterior mirrors, electrically foldable, F66 Lockable glove compartment, F68 Exterior mirrors, heated and electrically adjustable, F71 Interior mirror, automatically dimming, FKB Panel van, FP2 Mirror package Vito, FY7 Multi-button remote control, FZ5 Anti-theft and intrusion alarm system, G43 9G-TRONIC, GA7 Transmission, automatic, torque 700 Nm, H00 Warm air duct to passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 Semi-automatic climate control system TEMPMATIC, HZ0 Auxiliary heater, electric, HZ7 Semi-automatic climate control system, TEMPMATIC in the rear, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, K51 Protection against misfueling, KB5 Main tank 70 liters, KP7 Exhaust gas cleaning SCR generation 4, L LEFT-HAND DRIVE, LA2 Headlamp Assist, LC4 Comfort roof control panel, LC8 Ambient lighting for tailgate, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LE6 Night lighting in the rear, M3E Suction fan, electric, performance level 5, M60 Generator 14 V / 250 A, M72 Vehicle suitable for HVO fuel, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MO5 EMISSION CLASS EURO 6e RDE5 M/N1 GR. II, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, RY2 Tire pressure monitoring system at front and rear axle, wireless, S23 Front passenger seat, single seat, SA1 Seat cushion depth adjustment for driver, SA6 Airbag for front passenger, SB1 Comfort driver's seat, SE5 Lumbar support for driver's seat, SH1 Thorax-pelvis sidebag for driver, SH2 Thorax-pelvis sidebag for front passenger, SH9 Windowbags for driver and front passenger, SK2 Seat occupancy detection for driver's seat, SK6 Child detection in the vehicle, passive, T14 Active locking mechanism for sliding door, T19 Sliding door, left, T55 Electric actuation for sliding door, right, T56 Electric actuation for sliding door, left, T70 Child safety lock on doors in passenger compartment, T74 Grab handle for entry, U3V Seat facing each other, 1st row, seat rails, U73 Armrests for seating in passenger compartment, UR1 Seat rail system with quick-release mechanism, US4 3-seater bench seat, comfort, 1st row, outer seat folding, US5 3-seater be