Used Keep Warm for sale (621)

Condition: new, Year of construction: 2023, functionality: fully functional, power: 114 kW (155.00 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 120" heating cannon is a powerful heater suitable for use in warehouses, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are immediately available from stock. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 120 heating unit with oil burner - 1 Roth mobile heating oil tank 1000 L - 1 room thermostat with connection cable Rated heat load: 114 kW Air output: 8050 m³/h Ndodpjxgbbtefx Affof Fuel: heating oil EL Fuel consumption: max. 11.2 L/h Flue gas loss: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 296 kg The machine can be viewed on site by appointment. All information without guarantee. Subject to prior sale.

Condition: good (used), ApenGroup LRP28DE Gas-Fired Warm Air Generator Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nominal Heat Input QN: 27 kW Nsdpfx Afjx Ihlkjfsdf Nominal Heat Output: 24.63 kW Connection Voltage: 230V 1N, 50Hz Airflow: 2700 m³/h Protection Class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2280 mm Ndodpfx Aevz Hq Tsffef Weight 500 kg Total power requirement 1 kw

Condition: used, Warm air oven, circulating air oven, heat chamber, tempering oven Nsdpfexciugjx Affodf Maximum internal temperature: 240°C Internal dimensions (W x D x H): 485 x 485 x 300 mm Power supply: 220 Volt, 50 Hz - Airtight door lock - Connection for overpressure or vacuum with shut-off valve and pressure gauge from -1 bar to +0.6 bar - Inlet or exhaust air valve for the heating chamber - Interior heated up to 240°C, without temperature control. Dimensions (L x W x H): 790 x 670 x 520 mm Weight: approx. 60 kg Good condition

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,000 kg, heating capacity: 198 kW (269.20 HP), large warm air furnace for firewood and residual materials External dimensions approx. 3.5 m x 1.5 m x 3 m Weight 4 t with control system with warm air blower Njdpfx Afsw Ucfdefodf

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 14-22 mm number of dies: 7 number of stations: 8 Nodpfewi Sulox Affsdf cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nsdpfxexli I Ss Affjdf Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% Njdpfx Aex Ihiisffjdf EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Weight 300 kg Total power requirement 1,2 kw Njdpjvz Hq Hefx Affsdf

Condition: like new (used), functionality: fully functional, Year of construction: 2023, - Automatic hot mounting press - Product details: - corrosion-resistant table model with automatic hydraulic hot mounting Ndjdot Dvyfepfx Affof - electro-hydraulic automatic system - 7-inch user-friendly LCD touchscreen system - Preset programming and data storage parameters (up to 100 memory locations) - Setting of heating time, cooling time, assembly temperature, pressure build-up and cycle start via the LCD touchscreen - Cooling process - slow cooling, medium cooling and fast cooling mechanism. - Easy replacement of the mold assemblies - Sliding locking mechanism - Automatic water cooling system - Timer buzzer display for heating and cooling cycles - Possible sizes: 1 inch, 1 ½ inch, 2 inch, 30 mm, 40 mm and 50 mm - Power supply: 230 V / 50 Hz - Machine color: 3-Rath design (grey/red)

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan Ndjdovnuq Iopfx Affjf - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: new, Heating capacity 30 kW Ndedpfjvxa Itex Affjf Dimensions (L/W/H) 105 cm x 60 cm x 147 cm cm - NEW -Kanuk Turbo 2 *new look*hot air stoveincl. heat exchanger and hot air blowernominal heat output 30 kWdimensions 105 cm x 60 cm x 147 cmheatable room volume 1000 m³log length 80 cmefficiency 82,4 %flue pipe connection 150 mmitem no. 2100006

Year of construction: 2020, operating hours: 0 h, condition: new, 4 Stationary Warm Air Heaters S / SC oil/gas from Knoll for sale. Purchased in 08/2022 from DEXES Berlin, Ndsdpfx Afsppv Hbefjf Original: 12.499 € net/piece; Warranty until 7/2024. 2 pieces unused (11,000 € net/piece); 2 pieces were used only 3x: for this the price is further negotiable. Location 95506 Kastl; to be sold individually; Self-collection desirable. The warm air heater is already equipped with an oil burner / nozzle and room thermostat.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: Nodjx Ihg Ispfx Affjdf - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x2000x2550 mm Nodpfovz Hqyex Affjdf Weight 1400 kg Total power requirement 4,5 kw

Condition: ready for operation (used), Year of construction: 2010, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Nodpfxsvnu Ake Affsdf Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: new, - NEW -Kanuk® OriginalHot air ovenNominal heat output: 15.4 kWDimensions: 80 x 58 x 95 cmheatable room volume: 450 m³Efficiency: 83.4%Log length: 48 cmFlue pipe connection: 160 mmTotal power (kW): 15.4Dimensions H x W x D (cm): 80/58/95Space heating capacity (m³): 450Flue pipe connection (mm): 160Flue pipe connection: top / rear viewing window (cm): 28 x 15Efficiency (%): 83.3Weight (kg): 148Exhaust temperature (° C): 216Log length (cm): 48Wood consumption (kg / h): 3.9Exhaust gas mass flow (g / s): 14.28Minimum chimney draft (Pa): 16Exhaust throttle valve: ing chamber H x W x D (cm): 40 x 44 x 49.5Ash box: e 1 (self-closing door): OptionalWindow flushing: YesBimSchV Level 2: YesLogs, wood briquettes: YesDIN EN number: 13240Brown coal briquette: No AT §15a B-VG Norm: YesPrimary, secondary, tertiary air: yesCE mark: YesOutside air connection (mm): 100LRVSwitzerland: yesNo. 2100102 Nodpfx Afjvwf Rkofjdf

Condition: excellent (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-4E Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request! Njdpfx Afjx Ig Ttjfedf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Ndodevz Hqtopfx Affsf

Condition: new, - NEW -without side panel and without base frameKanuk® OriginalHot-air stove- combustion chamber opening H x W (cm): 90 / 64- Flue pipe connection:top / rear- Efficiency (%): 85,2- Log length (cm): 55- Minimum flue draught (Pa): 16- Ash box: No- BimSchV stage 2: Yes- Brown coal briquette: No- CE mark: Yes- Total output (kW): 26- Room heating capacity (m³): 1000- Window (cm): 34,5 x 22- Weight (kg): 193- Wood consumption (kg/h): 6,5- Exhaust gas throttle flap: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 120 mm- Dimensions H x W x D (cm): 90 / 64 / 110- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 229- Exhaust gas mass flow (g/s): 18.5- Combustion chamber H x W x D (cm): 50 x 55 x 55- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100109 Njdjvwfz Aopfx Affsdf

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation Nedpowb A Hijfx Affjdf with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Nodpfxsvz Hqmo Affsdf

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Nedpowb Axrjfx Affodf Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1700x2550 mm Weight 1200 kg Ndjdpfx Aovz Hqgoffof Total power requirement 2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2300 mm Njdpfx Ajvz Hhxoffjdf Weight 650 kg Total power requirement 1,05 kw