Used Wall Saw for sale (11,534)

Condition: new, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 600 mm, cutting width (max.): 620 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 3,120 mm, total length: 2,900 mm, total width: 2,750 mm, overall weight: 3,200 kg, table height: 1,150 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the LPS-T band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long blade life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force application of the saw feed is located directly below the cutting point. Servo feed system The use of the Behringer servo feed system ensures a constant chip removal rate and makes better use of the capabilities of modern saw blades. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloads and premature wear of the saw blades. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large chip conveyor with an integrated coolant tank. The chips and coolant generated are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be moved out of the machine frame. Hjdpez Rzg Aofx Ag Esfn Adjustable material support table For easy loading and unloading using a crane, the material table under the saw unit can be moved out. NC measuring device Optionally, the LPS-T band saw can be equipped with an NC-controlled measuring device. The cutting depth is digitally pre-programmed in the control panel. The material to be cut can be quickly aligned on the measuring device when placed and then securely clamped. This significantly speeds up the setup process. Fast blade change ensures the shortest setup times. In just two to three steps, the saw blade can be brought into the change position. Blade guide parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Compact Due to its compact dimensions, the band saw can be installed even in confined spaces. Driven duplex chip brushes effectively clean the saw blade, thereby increasing the tool life. The brushes are automatically adjusted to the saw blade and ensure consistent cleaning performance.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cutting height (max.): 80 mm, Equipment: CE marking, scorer, Panel dividing saw (horizontal) Felder / Format 4 Type Kappa Automatic KA75 4300 x 4300 Year of manufacture 2011 Horizontal panel saw from a carpentry workshop Hfodpfoz Rvfmox Ag Esn Cutting length 4300 mm Feed length of material support 4300 mm Saw blade overhang max. 80 mm Saw motor 9 kW Scoring saw 1.1 kW 9 Clamping devices Quick-clamping system for main and scoring saw blades (ProLock) Electronic cutting height adjustment Automatic recognition of cutting length via laser sensor on the saw carriage Feed rate steplessly adjustable, approx. 5 - 100 m/min., return speed approx. 130 m/min. 3 Air cushion tables (1x 2300 mm, 2x 1800 mm) Electronic control system: Modular control system with 24" TFT flat-screen display. The control system is prepared for online connection and for connecting a label printer. Without optimization software – this remains with the previous owner!

Condition: new, functionality: fully functional, total length: 1,385 mm, total width: 2,900 mm, total height: 2,150 mm, type of input current: three-phase, saw blade speed: 150 rpm, pivoting range: 45 °, input voltage: 400 V, overall weight: 1,600 kg, cutting range round steel at 45°: 320 mm, cutting range round steel at 90°: 320 mm, warranty duration: 12 months, cutting range square steel at 45°: 320 mm, Equipment: rotational speed infinitely variable, Advantages of the miter bandsaw HBE320-523G Hfedpfxoz Rzugj Ag Eon Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the machine to the changing material cross-sections. Due to its arrangement directly on the back of the saw band, the system regulates quickly and precisely. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best miter cuts and maximum service life of the miter bandsaw. Micro-spray system When sawing profiles, tubes and solid material, the standard minimal quantity lubrication system delivers the best results. The saw band is constantly wetted with cutting oil via two nozzles. This guarantees a long service life of the saw band and a clean working environment. 3° inclination of the saw band enables higher cutting performance when sawing hollow profiles and beams and reduces burr formation. Customer-oriented sawing concepts Behringer offers complete system concepts with individual transport solutions, where everything fits together perfectly. We are a competent partner and provide comprehensive advice. Closed material table The closed table support facilitates work with the miter bandsaw. Even short sections can be easily transported in and out of the machine. Band-guiding parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Automatic guide arm adjustment Optimal sawing result without adjustment effort - even with frequently changing material widths. Feed control with servo drive optional Optionally, the saw feed is carried out by means of a ball screw and servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Electrically driven chip brush with BEHRINGER quick-change system for tool-free brush change. The special engagement angle protects the teeth of the saw band. Energy-efficient drive system More output with lower energy consumption. Protects the environment and your wallet.

Condition: used, Year of construction: 2007, functionality: fully functional, Used horizontal ZENZ block bandsaw, type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveyor system, year of manufacture: 2022 Manufacturer's number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 attachments) • Log lifting preparation with frame Hodpfx Agswlfdxo Eofn • 4 leveling supports with claws (+2 attachments) • 1 log roller • 1 new infeed saw • PLC control including sorting program • Seat mounted on armrests • PLC on the left - joystick on the right • 1 Zenz sharpening machine, type AHB (manufacturer's number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (production no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (production no.: AB 0) • Water lubrication system with 20-liter drum and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Attachment for pipe o Two attachments for cylinders • Ejector, hydraulic, for 820 mm frame • Green horizontal laser indicator Mechanization consisting of: • Folding frame, hydraulic, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller conveyor, 4 m long – slightly angled with stop o All electrical and hydraulic elements can be operated from the control panel The block bandsaw including the conveyor system is fully operational. If required, we can provide support with disassembly and assembly.

Condition: good (used), Year of construction: 2010, Blade diameter 315 mm 2 speeds Coolant system Hedpfx Aez R I Twsg Eefn

Condition: used, Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Hjdpozrywqjfx Ag Ejfn Cutting length ~ 460 mm Technical data: - Motor: 2 kW - Connection: 380 V

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1424140083, Elumatec sawing machine SAS 142/141 with dust extraction system Year of manufacture: 2008 Cutting accuracy: 0.5-0.6 mm Dust extraction system: Year of manufacture: 2008 Hfodpfx Agoz Rpgwj Ejn For sale only to dealers and commercial businesses. Due to the age and operating hours, no guarantee or warranty is provided.

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Hfsdpfx Agszryvaj Esn - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 600 mm Outreach of the support: 585 mm Cutting depth: 370 mm Table swivels: yes, from 0 to +20° Table size: 890 x 620 mm Belt speed: 18 m/min Motor power: 2.2 kW / 400V Hodpfxehpl Tfe Ag Esfn Motor brake: yes / automatic Dust extraction connection: 2 x 100 mm Machine length: 1100 mm Machine width: 670 mm Machine height: 2050 mm Weight: 295 kg

Condition: excellent (used), Beck Wall 1000/2000 Extraction Wall Extraction wall Type: Beck Wall 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet, evenly distributed. For connection to a central extraction system via a suction nozzle located at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom on the front of the wall. Possible applications: Hfjdpfx Agsk Shuho Ejn Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mixtures or other stationary dust-generating processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: DN 250, located at the top center Recommended extraction capacity: 3000 m3/h Paint finish: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: €2,970 You can find more items - new and used - in our shop! International shipping costs available upon request!

Year of construction: 1999, condition: excellent (used), SICA-TRK-SY.U 25-160 PIPE SAW for LD-PE and HD-PE PIPES CHIPLESS CUTTING With central clamps with for all diameters Hfodpfx Aom E Nqyjg Esn Minimum diameter 25 mm Max diameter 160 mm Year of construction 1999 Status: Very good, in working order Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Hjdju Nigkjpfx Ag Ejfn Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Specification Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Sawn conveyor Hedpfx Aowfd Icog Ejfn Corner cutting Pressure CNC controller Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm If If you have more questions, we will be happy to answer them.

Condition: used, This listing is for the Radiant Innovation ZG10U Wall Mount co2 Monitor with receiver The unit is in full working condition and is ready for immediate use The ZG10U Wall Mount CO₂ Monitor by ZyAura is a professional indoor air quality monitoring device engineered for environments where accurate CO₂ measurement and ventilation control are essential. It utilizes advanced sensing technology and supports automated safety alerts for confined spaces. Key Features & Specifications CO₂ Measurement Range: 0–50,000 ppm (parts per million) Sensing Technology: Dual Beam NDIR (Non-Dispersive Infrared) – ensures precise and stable long-term CO₂ detection Accuracy: ±100 ppm or ±5% of reading (whichever is greater) Hfjdpfxoxv A Dbo Ag Ejn Temperature Monitoring: 0°C to 50°C (32°F to 122°F) Display: Large digital LCD that clearly shows ambient CO₂ concentration and temperature Alarm System: Audible and visual alerts with configurable alarm thresholds (AL1 and AL2) Relay Output: Controls external devices (e.g., fans or CO₂ generators) Output: 30 VDC or 250 VAC, max 2A, SPST, Normally Open Automatic Ventilation Control: Relay output can trigger ventilation (e.g., fan) in confined spaces based on CO₂ levels IP Rating: IP54 Splash Proof Protection for the Sensor Unit (SEU), excluding the backside when mounted on a wall SEU + RDU Modular System SEU (Sensor Unit) connects with up to 3 RDUs (Remote Display Units) via 7-meter communication cables Ideal for safety notices in multiple locations or rooms Remote units mirror real-time CO₂ and temperature data from the SEU Common Applications Offices and meeting rooms Classrooms and educational facilities Laboratories and research centers Industrial warehouses and storage units HVAC system integration for smart ventilation Installation Wall-mounted design (recommended ~0.45 m from the floor) AC adapter power supply (110/220 VAC) Easy relay connection to ventilation or safety systems Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg Hfedpfx Ajyv Ai Hjg Esn If you have any questions or require additional information, please send us a message or contact us by email.

Condition: new, Catalog number H0548 - New machine, in stock - CE certificate - Cutting length: 3200mm - Cutting width: 1150mm - Cutting height at 90°/45°: 80/55mm - Max. blade diameter: 305mm - Blade adjustable up/down and at a 45-degree angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring blade speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring blade motor: 1.1 kW - Carriage guidance on steel bars Overall dimensions: - Length: 3220mm - Width: 3150mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment Hfsdpfszw Dnqox Ag Ejn - Table extension - Table widening - Rip fence for angled cutting - Main blade and scoring blade included Net price: 20320 PLN Net price: 4726 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices are subject to change in case of significant exchange rate fluctuations)

Condition: excellent (used), Table length: 320 cm Cutting height: 9 cm Motor power: 7.5 kW Hfedpszykwksfx Ag Esn

Condition: used, SCM SI400n sliding table saw Table extension: 200 cm, Main motor: 7.5 kW, Scoring saw, manually adjustable, Max. cutting width from the right side: 1670 mm, Tilt: 0-45 degrees, manually adjustable, Blade height adjustment: manual, Max. blade diameter: 400 mm, Hfsdpfx Ajznbcmog Ejn 3 blade speed settings.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1500390, Double miter saw from Fom Industrie, model ALVA 50 A, with a 5-meter cutting length, manufactured in 2026. Equipped with a software license for cutting to specific lengths (extra long and very short) and at variable angles, a software license for displaying profile sections in DXF format, and a label printer. Hfjdpfx Aez Nghvog Eon

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Radial arm saw graule ZS 170N Hjdpsz Nk Elsfx Ag Eefn For cutting ALU,PVC and wood -cross-cut and mitre circular saws for straight cross-cuts and mitre cuts left and right -stable grey cast iron construction -precise ball bearing guide of the tool slide on hardened and ground steel shafts -manual saw feed fast mitre adjustment up to 25° -readjustable fixed stops at 90° and 45° -lower saw blade protection can be connected to extraction system Motor : 400 V / 3.0 kW Lenght of cut: 410 mm Depth of cut : 170 mm Sawblade diameter : 420 mm The saw is equiped with pneumatical clamping, lubricating unit adn hydraulic saw feed brake. Machine is ready for operation saw blade sharpened. We can ship the machine to your address via shipping company DSV ( On demand)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 123,456,789 h, functionality: fully functional, machine/vehicle number: 7461, input current: 3 A, input frequency: 50 Hz, The machine is used and has been in professional industrial use. Machine can be inspected in Estonia. technical specifications manufacture- STROMAB Model- TR 450 MATRIX OPTI Year- 2019 Machine nr 7461 saw blade diameter- 450mm Hfsdpoz Iylqsfx Ag Eon motor speed- 2800rpm weight- 900kg

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. Hjdpfxoz I Tm Ij Ag Eofn The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: used, Year of construction: 1992, Panel saw Hsdpfx Aoz I Tqajg Eefn Manufacturer: Altendorf Model: F45 Year of manufacture: 1992 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: approx. 1,450 mm Power: 5.5 kW Saw blade diameter: max. 450 mm Speeds: 3000 - 4000 - 5000 rpm Scoring saw: No Motor brake: No

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Fully functional semi-automatic saw with single-sided miter capability. Hfedpsz I U Imjfx Ag Esn

Condition: good (used), Year of construction: 1998, functionality: fully functional, Bandsaw automat Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars. Length approx. 8 m Hfedoz E Np Hspfx Ag Een The bandsaw automat is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min. Machine dimensions (L x W x H): 320 x 260 x 220 cm Weight: approx. 2500 kg