Used Vibration for sale (1,849)

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Technical specifications Pressure 10 bar Suction capacity 510 l/min Filling capacity 390 l/min Iiodpfxsbyhvre Afijh Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg subject to prior sale

Condition: new, Empty weight: 120.000 kg Cargo space capacity: 160.000 l Productivity: 240 tph STANDARD CONDITIONS The plant is designed for a production of, 160 t/h of road mix with a finished product at initial moisture 4% and of 160 C, under the following standard conditions: •Aggregates temperature at dryer inlet 10 C •Altitude sea level •Average feed aggregates density 1.650 kg/m3 •Heavy-oil No: 6 calorific value ≥ 9.200 kCal/kg Iodpfxjw Hzk Do Afieih •Heavy-oil No: 4 calorific value ≥ 9.700 kCal/kg •Diesel-oil calorific value ≥ 10.200 kCal/kg •Natural gas calorific value ≥ 7.600 kCal/kg •Hot aggregates temperature increase 160 K •Mixture residual moisture content 0,3 % •Max. aggregates size 40 mm •Material passing screen 3 mm 35 % •Material not porous and hygroscopic with normal shape •Production tolerance rate according to ambient and parameterconditions ± 4 % COLD AGGREGATE BUNKERS •There shall be 4 cold aggregate bunkers made of 5 mm St 37 sheet, they shall be approximately20 m3 and each one shall be produced separately.•There shall be 800 mm high upper additions made of 6 mm sheet on the bunkers to preventmaterial overflow.•Material cast of the bunkers shall be made with group.•Material cast flow rate of each bunker shall be frequency controlled (speed controlled) dozingone by one if desired or adjustable from computer screen.•The flow rate of the material flowing from bunkers shall be adjustable from the manual gate to beplaced on each bunker.•In case of running out of the aggregate flowing from the bunkers, there shall be a warning systemand a warning sign shall be displayed on the computer screen to warn the operator.•Vibrator engine controlled from computer screen shall be placed to relieve material flow andprevent blockage in the bunkers with thin materials.•A conveyor belt system shall be installed under each bunker to ensure material flow.•Each bunker shall be equipped with modular gratings consisting of 10x50 metal sheets 10mmrounds.•Silo loading width shall be 3000x2400 mm.•There shall be rope emergency stop system for emergencies.•Possible failures on belts shall be displayed on the computer screen. 2.SUB-BUNKER COLD AGGREGATE COLLECTOR BELT •Horizontal belt shall convey the material taken from each bunker separately in a controlledmanner to the dryer sloped belt and be able to convey material to 160 t/h capacity plant.•Rubber belt shall be 10 mm thick; 800 mm wide 4 layered court fabric and have 4 EP 125qualities.•Belt Start/Stop operation shall be performed from computer screen. When the materials in thebunker are desired to be discharged at the end of the season, the belt may be run reversewithout running the other units.•Horizontal belt chassis shall be made of steel construction material by which the belt can operatesmooth and produced with belt tensioning system. •The belt shall be with separator system from each end. •The driving drum shall be rubber coated and it shall be 1 degree angle lathed. •There shall be rope emergency stop system for emergencies •Possible failures on belts shall be displayed on the computer screen. •The belt shall be 7,5 kw d/min red./motor driven, driving drum shall be rubber coated, the beltshall be able to be driven triple roller chassis. The bearings in the roller shall be enclosed type andmaintenance-free. 3.DRYER GROUP...

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - inlet width 550mm - inlet height 220mm - shaft width 630mm Iiedpswa Am Hofx Afieh - knife length 630mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor approx. 1.5kW - toothed pulling shaft from the top - upper shaft motor approx. 1.5kW - vibrating chute - vibrating chute length 4750mm - vibrating chute width 450mm - main motor 45kW - vibrating chute motor 1.5kW - auto reverse - reverse gear - total machine dimensions L/W/H 3200x1700x1400mm - total machine dimensions length/width/height 4750x800x1100mm - weight about 4500kg ADVANTAGES - auto reverse (adjustable) - reverse gear - used chipper, very good condition Net price: PLN 120,900 Net price: EUR 28,440 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Ijdpjxnlgpjfx Afieih

Condition: used, Year of construction: 2023, load capacity: 1,250 kg, lifting height: 4,280 mm, total length: 4,700 mm, · Max. Tragkraft 1500 kg · höhe 4.30 m · Maximale seitliche Reichweite 2.62 m · Reichweite bei max. Hubhöhe 1 m · Ausbrechkraft mit Schaufel 1880 daN · Shipping mass (min. / max.) 2700 kg / 2900 kg · Radstand 2.13 m · Gesamtlänge bis Gabelträger (mit Anhängerkupplung) 3.47 m · Gesamtlänge bis Gabelträger (ohne Anhängerkupplung) 3.47 m · Überhang vorne 0.77 m · Schüttwinkel 116 ° · Kippwinkel 23 ° · Wenderadius (über Räder) 2.62 m · Reifenmodelle CAMSO - MPT 552 - 10.0/75-15.3 124A8 · Heben 8.80 s · Senken 7 s · Teleskop ausfahren 6.40 s · Teleskop Einfahren 4.30 s Iiedpfxexndpie Afioh · Ankippen 3.40 s · Auskippen 2.60 s · Hersteller Yanmar · Motornorm Stage V / Tier 4 final · Motor Modell 3TNV88C-DMU · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 3 - 1642 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW) 35.10 Hp / 26.20 kW · Max. Drehmoment / Motordrehzahl 105 Nm @1950 rpm · Wendelüfter Option · Kühlsystem des Motors: 3 Kühler (Wasser + Hydrauliköl + Kraftstoff) · Getriebetyp Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre: Sperrdifferenzial an Vorder- und Hinterachse · Parkbremse: Automatische negative Parkbremse · Festellbremse: Hydraulische Servobremse · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 48 l/min - 235 bar · Flow Sharing Standard · Hydrauliköl 39 l · Fassungsvermögen des Kraftstofftanks 35 l · Innenschallpegel (LpA) gemäß Norm NF EN 12053 geprüft:76 dB · Außenschallpegel (LwA) 104 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Sicherheit Zulassung der KabineKabine ROPS - FOPS Stufe 1 · Steuerungen JSM

Condition: ready for operation (used), Vibratory feeder, circular feeder, vibratory parts feeder 220 mm, used machine Manufacturer: Gasco Type: BVN 1 Overall dimensions: Width: 250 mm Ijdjxnc Tyspfx Afieih Depth: 250 mm Height: 240 mm Electrical data: 230 V, 0.5 A, 115 W Bowl size: 120–220 mm

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price Iiodpfobtnftjx Afieh

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery. Ijdjvgzv Iepfx Afioih

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 286964, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 2,000 mm, total length: 4,000 mm, total width: 2,500 mm, overall weight: 5,000 kg, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50-60 Hz Rated current: 46 A Connection load: 26.1 kVA Control: MAZATROL SMOOTH C The machine is equipped with a 12-position turret, a three-jaw chuck (diameter: 160 mm), a sorting unit with vibrator head by GRIMM, a chip conveyor, and a cooling system. NOTES ON COLLECTION: Collection must be firmly scheduled between December 10 and 12 FCA Winterlingen, loaded onto truck Isdexm Swxspfx Afioih

Condition: used, total height: 3,300 mm, total width: 1,850 mm, total length: 3,450 mm, Empty weight: 2.000 kg Extraction installation ModestaCapacity +/- 15,000m³/h Extractor fan 18.5 kW Connection diameter 500mm Transport fan 7.5kW Electric knocking system (vibrator) Filter bags Iijdpewnh Apefx Afioh Filter bags 72 pieces Filter length 1950mm Filter diameter 200mm There is no door for filter items. Transport dimensions: 3450x1850x3300mm (LxWxH), + 2x pallet Weight +/- 2000kg - Number of filter bags [pcs]: 72 - Filter length [mm]: 1950 - Filter diameter [mm]: 200 - Connection diameter [mm]: 500 - Main fan power [kW]: 18.5 - Control cabinet present: No - Shaking system: Yes - Collection bins: No - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 7.5 - Documentation available: No - Transport dimensions: 3450mm x 1850mm x 3300mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Vibratory feeder, circular feeder, vibratory parts feeder 640 mm, used machine Iiedpfoxnc S Nsx Afish Manufacturer: Gasco Type: BVN 4 Overall dimensions: Width: 720 mm Depth: 720 mm Height: 510 mm Electrical data: 230 V, 2.5 A, 575 W Bowl size: 340–640 mm

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Iijdpobunq Hsfx Afieh Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: ready for operation (used), Vibratory feeder, circular feeder, vibratory parts feeder 500 mm, used machine Manufacturer: Gasco Type: BVN 3 Overall dimensions: Width: 580 mm Ijdpfsxnc Svox Afisih Depth: 580 mm Height: 460 mm Electrical data: 230 V, 1.6 A, 368 W Bowl size: 330–500 mm

Condition: new, Year of construction: 2025, Heavy machine base guarantees high torsional rigidity and vibration-free operation Better sanding results due to sanding belt oscillation via separate gear motor Oscillation optionally switchable Veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer overhangs Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for utilization of the entire sanding belt width Height adjustment of the sanding table and sanding unit swivelling via hand wheels Height-adjustable additional table with suction device for grinding radii Optimum chip removal through extraction at the unit and at the cross table Automatic compensation of strip length differences due to spring-loaded strip tension Dimensions and weights Length approx. 1900 mm width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Suction socket diameter 120 mm Drive power Oscillating motor 0,25 kW Work table(s) Working table length 960 mm Working table width 352 mm Working table height adjustment 210 mm Cross table height min. 730 mm Isdpfxsff Ed Tj Afioih Electrical data Input power 3 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s grinding surface length 1050 mm Grinding surface width 220 mm Swivel 0 - 45 ° Oscillation stroke 20 mm Availability: Short term

Condition: ready for operation (used), Vibratory feeder, circular feeder, vibratory parts feeder 460 mm, used machine Manufacturer: AFAG Type: KWF 50/2 Iisdpfxexnc Rre Afieh Overall dimensions: Width: 500 mm Depth: 500 mm Height: 1060 mm Electrical data: 230 V Bowl size: 220–460 mm Year of manufacture: July 2004

Condition: new, Year of construction: 2025, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt Iiodpfoff Hdfjx Afioh High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh

Condition: new, Year of construction: 2025, Versatile and powerful Pumping out of ponds, pumping out of cellars, e.g. in case of floods, irrigation of flowerbeds Sucks up even water contaminated with sand, cleaning agents or oil, e.g. sewage, mud, ... Approx. 2.5 hours running time with one tank filling at 75% load Robust, durable and reliable Functional in all weather conditions Spiral housing and impeller made of cast iron, thus highest robustness and long service life of the pump, even when used with sandy water Powerful and efficient 4-stroke engine, easy to start in all conditions Robust steel frame with vibration dampers Built-in diaphragm prevents backflow of water Easy to operate Quick and easy start-up by directly creating the vacuum and connecting the hoses to the pump Convenient maintenance Dimensions and weights Length approx. 560 mm Width/depth approx. 430 mm Height approx. 465 mm Weight approx. 36 kg Drive Iijdpfx Aohkz Husfioh Engine power 4,5 kW Fuel petrol Pump Application area dirty water Delivery head max. 26 m Delivery rate 966 l/min Inlet/outlet diameter 76.2 mm Suction height 7 m Grain size max. 27 mm Scope of delivery: 2x hose coupling 2x union nut 2x rubber seal 3x hose clamp 1x suction strainer 1x Hose coupling for suction strainer 4x rubber foot 1x set of assembly tools Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2024, Solid, self-supporting, firmly welded, torsion-resistant saw frame Sturdy, durable saw-bar steel construction Robust bearing of the motor carriage ensures high cutting precision Powerful, low-vibration 3.9 kW (5.3 hp) motor TRK dust extraction system Automatically deflecting aluminum slatted frame with plastic supports Device for wall mounting ball bearing support rollers divided center support at optimal working height, with aluminum grids integrated small parts support made of wood Supersilent sound insulation for the reduction of saw blade noise Electromagnetic motor brake Ijdpfxjihahbj Afisih Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3,9 kW (5,3 PS) saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 exhaust ports ø 100 mm Connected load 4,8 kW Mains connection 3 x 400 V / 50 Hz cutting range: L: 4600 ; Hvertical: 2200 mm , Hhorizontal: 2100 mm Equipment: - Compact 5220 - Scorer VSA stepless - Strip stop - Mech. braked support rollers - Free standing support compl. Location: Ex stock 54634 Bitburg - immediately available - Photo shows optional digital display, which is not in the on offer.

Condition: as good as new (ex-display), Year of construction: 2025, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Ijdpsdqzh Tjfx Afioih Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, - NEW - Make Ganner Gannomat type SELEKTA 253 220 V, 1 Ph, 50 Hz complete in standard version with: - fully automatic electronic control with program selector switch Isdpfsdwi Rkjx Afisih SPUeLING-LEVeLING/INsERTING - lever feed via electronic vibration transducer with potentiometer for stepless adjustment of the duebel feeding power - Automatic duebell diameter and duebell quantity control with Auto-DL-Select system (automatic ejection of wrong dumbbell diameters +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for glues with viscosity from 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via Time preselection by electronic control - LEIM/WASSER selector switch for rinsing/cleaning of the glue system with EasyClean function button (automatic cleaning program for glue tube and (automatic cleaning program for glue hose and glue nozzle via spraying funnel and waste water collection container) - Control lamp for glue residue indication in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for rinsing/cleaning - 4 rollers for pushing the machine including 1 pistol for Ø 8 mm dowel length 25 - 40 mm driving distance 7 - 20 mm air connection: 6 bar price from 11750,-- EUR ex stock 54634 Bitburg

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg Iiodjlht H Nspfx Afioh - immediately available -

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Ijdpfohk Df Djx Afieih Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Iijdpfx Aor Ig Ahefieh Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Isdpfx Afsv Sk Nnsisih Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg Ijdeqlclbepfx Afijih - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -