Used Vertical Tapping Machine for sale (66,407)

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Lhedpfx Aoyviqdehvjd

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: Heidenhain, controller model: TNC640, workpiece weight (max.): 1,000 kg, total height: 3,355 mm, table width: 700 mm, table length: 1,350 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5 h, coolant supply: 20 bar, distance table center to spindle nose: 130 mm, number of slots in tool magazine: 60, tool length: 250 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Equipment of Axon VMC 1270 Heidenhain TNC 640 Travel X/Y/Z – 1,200/700/700 mm 12,000 rpm Direct Drive Spindle 60-position chain magazine with double-arm gripper Heidenhain glass scales on X/Y/Z ICS (internal coolant supply) 20 bar Chip conveyor Ledpfsywy Hlex Ahvohd Air cooling internal/external Automatic workpiece measurement Renishaw OMP 40 Chip flushing Coolant spray gun Handwheel Air gun Status LED in machine housing

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 480 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 270 mm, table width: 300 mm, table length: 600 mm, table load: 300 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 6,000 rpm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 1,381 h, spindle motor power: 7 W, input voltage: 440 V, type of input current: three-phase, Equipment: documentation/manual, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control system: Brother Spindle speed range: 6 - 6,000 rpm Main spindle drive power: 5 / 7 kW Tool holder: SK 30 Table clamping surface: 600 x 300 mm Rapid traverse (x / y / z): 36 / 36 / 30 m/min Number of tool stations: 14 positions The machine is fully functional. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and are provided without guarantee. Intermediate sale reserved! The machine is sold without any warranty. Lhodsxrpahepfx Ahvod

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: Simens, controller model: SINUMERIK 808D, total height: 2,700 mm, total length: 2,800 mm, total width: 2,300 mm, table width: 500 mm, table length: 1,000 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, The machine was purchased in August 2025 together with a lathe – listed in a separate advertisement – and has only been operated for testing purposes (up to 20 hours of operation). Due to a shift in business priorities, we will not be initiating the planned production. Lhodoyi Aprspfx Ahvsd Additionally: 12,000 rpm spindle, 4th rotary axis, TS27R tool measurement probe The machine is under a lease agreement with PKO Leasing S.A. until August 2028. Leasing terms will be provided upon contact. Lease transfer is preferred, although a cash purchase is possible with the lessor's consent.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Machining Center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of manufacture: 2008 Travel distances: Lhodpfx Ajyvgxxshvjd X-axis: 1,800 mm Y-axis: 510 mm Z-axis: 480 mm Clamping surface: 2x 1,000 x 510 mm Pendulum operation: 2 x 700 x 510 mm Spindle mount: SK 40 Tool magazine: 20 positions Celox spindle speed: 50 – 12,000 rpm Equipment - 3D Formingstar package - 3D Heidenhain measuring probe - Chip conveyor - Partition wall - LTA extraction system - Water tank with high-pressure pump 20 bar - Machine enclosure

Condition: used, Year of construction: 2020, operating hours: 1,556 h, functionality: fully functional, machine/vehicle number: 1527000698A, Equipment: chip conveyor, documentation/manual, DMG MORI CMX 1100 V 12000 rpm including options: 15 bar coolant through spindle & coolant gun and chip conveyor. Ledeywwhgopfx Ahvjhd Touch probe and tool setter.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Mitsubishi, controller model: M80B, table load: 255 kg, spindle speed (max.): 20,000 rpm, HAITIAN PRECISION TAPPING CENTER V-180 SHOWROOM MODEL, AS GOOD AS NEW V-180 specification: Controller:M80B Spindle air blow Spindle air seal Spindle oil chiller Pneumatic and lubrication system Coolant system Rigid tapping Direct drive spindle 20000rpm 16T disc type ATC 3-color signal lamp,working light X travel mm 500 Y travel mm 400 Z travel mm 330 Spindle nose to table surface mm 150-480 Table size mm 650×400 Table load kg 255 T slot mm 14×125×3 Drive type Direct drive Max.spindle speed rpm 20000 Spindle power (S1/S6) kW 3.7/5.5 Spindle torque (S1/S6) N.m 11.7/17.5 Spindle taper BT30 Pull stud MAS-P30T-1 Rapid traverse (X/Y/Z) m/min 48/48/48 Cutting feedrate (X/Y/Z) m/min 30/30/30 Max.tool dia. (Adjacent/Vacant) mm Φ60 / Φ80 Max.tool length mm 250 Max.tool weight kg 3 Tool change time s 1.6 Positioning accuracy X/Y/Z mm 0.010 Repeatable positioning accuracy X/Y/Z mm 0.006 Lhedpfx Asywvh Eshvjd Power capacity kVA 15 Machine weight t 2.5 Machine size(L×W×H) mm 1620×2080×2380

Condition: new, Year of construction: 2022, functionality: fully functional, New CNC Machining Center – 40% Special Discount – Available Immediately! We are offering you a new CNC machining center equipped with Siemens 828D ShopMill control. The machine comes from a showroom and was used exclusively for demonstration purposes. As a result, it is in mint condition – and we can offer you a special discount of 35%. 💰 List price: €63,500 🔥 Special price: €38,100 Technical specifications: Dimensions (LxWxH): 1850 x 1820 x 2400 mm Table size: 700 x 350 mm Lhjdpfx Ahjyi Ucqsvsd Travel X: 610 mm Travel Y: 355 mm Travel Z: 460 mm Tool changer positions: 16 Arm-type changer: Optional Max. table load: 350 kg Spindle speed: 10,000 rpm Weight: 2,500 kg CNC control: SIEMENS 828D SHOPMILL The following additional equipment has been installed: - Increased spindle speed to 10,000 rpm - Hinged belt chip conveyor - Through-spindle coolant (internal cooling) - High-pressure pump (20 bar) = 55 l/min, with separate tank - Automatic tool changer without arm for 16 tools - Preparation for 4th axis Fully enclosed cabin (CE compliant) Automatic tool clamping Automatic tool changer Automatic spindle air blast Screw-type chip conveyor Oil separator Coolant system Automatic central lubrication Work light Portable electronic handwheel for all 3 axes Telescopic covers for all 3 axes Chip flushing aid CE conformity Your advantages at a glance: ✔ As-new machine from showroom ✔ High-quality additional equipment ✔ 35% price advantage ✔ Immediately available If you are interested, we are happy to provide further information, arrange a viewing, or provide you with an individual offer.

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Lhodoyvfq Eopfx Ahvjd Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Weight approx.: 200 kg

Condition: used, Year of construction: 2013, Technical details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: Heidenhain TNC 620 switched on hours: 20246 h spindle hours: 7724 h number of spindle speeds: 12.000 U/min. max. torque on the spindle: 75 - 95 Nm spindle taper MT: SK40 tool changer with: 24 Plätze table-size: 900 x 410 mm max. table load: 350 kg feed range: k.A. rapid traverse:: 36 m/min interface: RS232 control voltage: 24 DC V air-pressure connection: 6 / 8 bar total power requirement: 20 kVA Weight approx.: ca. 6,0 t dimension coolant device: 1,7 x 0,7 x 1,35 m dimension machine xH: 1,9 x 2,3 x 2,45 m TNC620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), can be integrated into the network Safety doors with impact-resistant plastic window panes Chip conveyor Lhodpfxjvhbpdo Ahvod Hydraulic unit Coolant preparation system Rittal cooling system on the control cabinet Work area Interior lighting *

Condition: ready for operation (used), Manufacturer PFAUTER Model P 250 S Condition Used Serial Number 18990 Max workpiece diameter 250 mm Max module 4.5 Lhsdpfjv Hbbqsx Ahvjd Max hob diameter 115 mm Max hob width 105 mm Table diameter 200 mm Table hole diameter 55 mm Machine weight 2000 kg Equipment: new electrical system auto shifting pneumatic tailstock

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 4,500 kg, Heidenhain TNC 426 travels 800X500X500 mm table 800X500 mm BT 40 tool changer Lhjdpfxsylhybj Ahved

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 640 mm, Ultimax control BT 40 spindle, new in 2020 speed 10,000 rpm travels 1270X660X640 mm 24-tool changer Ledpsxu Ikqjfx Ahvohd chip conveyor

Condition: used, Year of construction: 2004, Schraml TopDrill double-head glass drilling machine. Maximum drilling height: 1300 mm. Automatic height adjustment. Automatic water feed. In perfectly working condition! Lhjdpfjywtn Asx Ahvsd

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 160410, Open top washer for 3-12mm Washing height 1600mm Lodswnw Afepfx Ahvshd

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm Lhsdpfx Aou A I Elshvjd max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Dimensions - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 - The machine is currently idle. - The buffer battery is depleted, resulting in the PLC connection being interrupted. Before commissioning, the connection must be restored; otherwise, axis movement is not possible. Ljdpfx Ahjywpa Isvshd The machine can be inspected under power at any time.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A Lhsdpoyu Trhefx Ahved CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 100000997, operating hours: 50 h, CONDITION LIKE NEW. OPEN FRONTED VERTICAL MACHINING CENTRE WITH 4 SHEAR HARDENED & GROUND BOX GUIDEWAYS, ENHANCED ACCURACY & CUTTING PERFORMANCE. TABLE Working Surface - 1,150 X 600mm Tee Slot (Size x Number x Pitch) - 18mm X 5 X 120mm Maximum Table Load - 700 kg TRAVEL Longitudinal Travel ( X-Axis) - 1,000mm Cross Travel (Y-Axis) - 600mm Vertical Travel (Z-Axis) - 630mm Distance from Table Nose to Table Top - 100 – 730mm Distance from Spindle Centre to Column - 650mm SPINDLE Spindle Nose Taper BT-40 Spindle Speed - PULLEY DRIVEN (STD.) - 8,000 RPM GEAR DRIVEN - 6,000 RPM FEED Cutting Feedrate - 12 M / Min Rapid Traverse (X and Y-Axis) - 20 M / Min Rapid Traverse (Z-Axis) - 20 M / Min ATC Tool Storage Capacity - S TYPE 20 (STD.) Tool Change Type - RANDOM Maximum Tool Weight - 6 kg Maximum Tool Diameter - S TYPE Ø95mm Maximum Tool Length - S:250mm Tool Shank - BT-40 Pull Stud Bolt - MAS P40T-1 Lhsdpfx Ahohzxwkovsd MOTOR Spindle Drive Motor (Fanuc) (30 min) - 7.5 (STD.) kW ACCURACY Positioning - ± 0.005mm Repeatability - ± 0.003mm POWER SUPPLY Electric Power Consumption - 20 KVA Air Pressure - 6.5 KG / CM² Voltage - 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) - 2,900 X 2,640mm Height - 2,890mm Weight - S: 6,500 / A:6,700 kg FANUC 0IMF PLUS CNC STANDARD SUPPLIED MACHINE FEATURES • Fully Enclosed Splash Guard • Work Lamp • Spindle Air Curtain • Air Blast Through The Spindle • Automatic Lubrication System • Levelling Bolts And Blocks • Coolant Jets Around The Spindle • Operation And Programming Manuals • Tool Box • Electrical And Mechanical Manuals • Operation Finish Lamp • Automatic Power Off • Cooling System • Heat Exchanger In Control Panel

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: Series 0i/-MC, total height: 2,580 mm, total length: 2,150 mm, total width: 2,470 mm, table width: 750 mm, table length: 540 mm, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 1,480 h, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, The Schaublin 60 CNC is perfectly suited for high-precision work and small batch production. This machine is renowned for its extremely high dimensional and form accuracy, outstanding spindle runout, and top surface quality – ideal for toolmaking, fine mechanics, or the medical/jewelry industry! The machine comes standard with: - Electronic handwheel - Original documentation Lhsdpfxeyu Rpks Ahved - Approx. 30 draw bolts

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Technical Specifications: Chiron FZ 08 S CNC Control Manufacturer: Fanuc CNC Control Model: 21m 3x / 2x 21iM Travel X-axis: 300 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Max. workpiece weight: 1 kg Lodpfx Ajywmzijhvehd Number of tool positions: 12 Coolant supply: 1 bar Number of spindles: 1 Rapid traverse Z-axis: 60 m/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Max. spindle speed: 10,000 rpm Max. workpiece diameter: 63 mm 4th Axis: Peiseler AWU P100 The machines were overhauled by Chiron CMS in 2016 Equipment: documentation/manual, infinitely variable spindle speed According to our assessment, the machine is in good used condition and can be inspected under power by appointment.

Condition: good (used), Year of construction: 2011, In good technical condition and fully functional. Year of manufacture: 06/2011. Fanuc control system. Axis travel – X-axis 2400 mm, Y-axis 960 mm, and Z-axis 800 mm. Lodpfoyu Nb Sjx Ahvehd

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Ledpfjxd Dgyox Ahvshd Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: ready for operation (used), Year of construction: 1991, Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible. Lhedpsywlp Ssfx Ahvjd

Condition: good (used), Year of construction: 2008, Used milling machine by Style Model: BT 1500 Max RPM: 6000 Year of manufacture: 2008 Lhsdpfxoyu Ifpo Ahvsd 4th axis Spindle coolant