Used Vertical Injection Molding for sale (9,579)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm Bdodpoh Dr E Tsfx Ab Tjk platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Bedpfx Asxyyxqsb Todk Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: new, Year of construction: 2021, operating hours: 864 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 14 mm, opening stroke: 350 mm, heating capacity: 1.4 kW (1.90 HP), power: 4 kW (5.44 HP), input voltage: 380 V, DR BOY XS 5000H VIS 14 OPTIONS: INTEGRATED MANIPULATOR OPENING + 50MM Bdjdoxmfq Ejpfx Ab Tek

Condition: excellent (used), Year of construction: 2016, operating hours: 33,500 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, column diameter: 35 mm, displacement volume: 144 cm³, Equipment: documentation/manual, Plasticizing cylinder assembly 35 mm (without nozzle) in highly wear-resistant version Servo-controlled, programmable nozzle unit for injection unit 1 Highly accurate and reproducible mold positioning through electromechanical servo drive Hydraulic core pull control for simultaneous, regulated movements; for both sequential and simultaneous movements, pressure and flow are programmable. Connections located on the moving platen. Electromechanical, position-controlled ejector Blow-off device 1 with pressure regulator Bdjdpfx Absxywxuj Tok Electric mold height adjustment for adaptation to different minimum mold heights, adjustment range directly programmable via SELOGICA control Electric, programmable conveyor belt Sorting unit for separating good and reject parts during production, installed longitudinally below the clamping area "Extended Monitoring" equipment package: Expansion of mechanical process monitoring for mold and machine for complex applications "Extended Movement Functions" equipment package: Increased number of movement steps and intermediate stop functions Freely configurable page for "Startup Parameters" to allow a selectable number of cycles to run with parameters different from the production parameters. Additional socket combination, with 1 Schuko and 1 x CEE via automatic cutoff (1 standard included, max. 1 additional possible) Extended mold protection 6 electric heating control circuits for mold heating, each max. 2 kW / 230 V Interface for a coloring/dosing unit (volt-free contact) "Quality Assurance" equipment package Tie-bar extension +100mm for mold installation height Integral picker Machine is sold without material feed and peripheral devices.

Condition: excellent (used), Year of construction: 2017, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control system: NC5 Operating hours: 10,800 h Bdjdjxywd Djpfx Ab Tjk Clamping unit type: 420/... Clamping force: 420 t Platen size (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mold height (min.–max.): 380 – 1050 mm (increased by 225 mm) Maximum distance between platens: 1050 mm Opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever mechanism with central oil lubrication Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, L:D standard) Additional equipment Rotary Servo Technology variable displacement pump (activeDrive) 5/2 pneumatic valve no. 1 for mold moving components (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle band heater (socket) 2 core pull circuits controlled by proportional valves, pressure-independent (programmable with unlockable check valves against core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position control, programmable independently of P/F+v, parallel to mold movement Ejector movement controlled by proportional valve, stepless adjustment Reinforced oil cooler (cooling water inlet up to 35 °C)

Condition: excellent (used), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions: WxHxD mm (8700 x 2800 x 2500) Screw diameter 2400: 70 mm 720: 45 mm Injection volume 2400: 1239 cm³ 720: 334 cm³ Injection capacity 2400: 1127 g  720:  304 g Injection rate 2400: 300 g/s 720: 142 g/s Injection pressure 2400: 198 MPa 720: 222 MPa Screw speed 2400: 0-184 r/min 720: 0-180 r/min Diameter of turntable : 1250 mm Max load on turntable: 3.3 t Power connection: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and double cylinder control 3 modes for injection retraction Bjdovvlv Repfx Ab Tedk Closing unit: Closing force 5300 kN Connection for Euro 18 robot Safety door Condition: used Scope of delivery: (See picture) Sale from location! Weight: approx. 31000 kg (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Bodpfx Aboh Dp R Ej Tjdk Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 Machine in very good technical condition, fully operational, ready for immediate use in an industrial facility. Clamping force factory increased by Arburg to 3600 kN. Clamping unit Clamping force: 3600 kN Platen dimensions (H × W): 1040 × 1040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum / maximum mould height: 300 mm Maximum opening stroke: 1400 mm Injection unit Screw diameter: 70 mm Injection volume: 1078 cm³ Shot weight: 984 g Injection pressure: 2000 bar Electrical-hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions & weight Bdedsxyq H Eepfx Ab Tsk Net weight with control cabinet: 17 t

Condition: used, Year of construction: 1998, functionality: fully functional, warehouse no.: 503460 manufacturer: ARBURG type: Allrounder 1200 TS 400-150 controller: year of construction: 1998 clamping force: 400 kN min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 1200 mm screw diameter: 25 mm swept volume: 54 ccm injection pressure: 2500 bar equipment included: screen text german Bdedpfjxwvfzex Ab Tsk CEE-socket 16A rotary table Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 4.1m x 1.75m x 2.6m total weight: 8000KG

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm Bdodpfx Aexwva Esb Tek - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, Engel Victory 330/110 Tech General Information Bdedpfx Abjxywdqo Tjk Year of manufacture: 2004 Control system: CC200 Weight: 7,400 kg Dimensions (L × W × H): 5.2 × 1.6 × 2.2 m Injection Unit: 330/... Screw diameter: 30 mm Specific injection pressure: 2,178 bar Injection volume: 113 ccm Shot weight: 103 g Clamping Unit: 110/... Clamping force: 110 t Platen dimensions: 680 × 740 mm Tie bar spacing: without tie bars mm (no exact value) Opening stroke: 500 mm Ejector System Ejector force: 40 kN Ejector stroke: 130 mm

Condition: new, For sale is a complete rack with ejector pins in various diameters as shown in the photos. No individual sale, only as a complete set including the rack. Bdedpfx Abjxwum Do Tok

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Bdsdpjxyk Snofx Ab Tjk

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Bdjdpfx Absxyqxue Tsk Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Injection pressure 1703 bar, 1297 bar, 1030 bar Bdjdpfxsw Aii Hs Ab Tok Screw speed 400 r/min, 320 r/min (current) Nozzle pressure 51.9 kN Screw diameter 25 mm Clamping Unit Opening stroke 458 mm Ejector stroke 100 mm Ejector force for / back 39.8 kN Clamping force 800 kN This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, warehouse no.: 503615 manufacturer: ARBURG type: Allrounder 375 V 500-170 controller: Selogica-direkt Bdjdpfjxv R Syex Ab Tek year of construction: 2013 operation hours: 36163 h clamping force: 500 kN min. mould height: 200 mm max. mould height: 550 mm max. open daylight: 302 mm opening stroke: 225 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2500 bar equipment included: screen text german rotary table Anti vibration mounts measures of machine l x w x h: 2.524m x 1.48m x 3.53m total weight: 3111KG

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Injection Moulding Machine Battenfeld HM 500/3400 Clamping force: 500 t Year of manufacture: 2007 Injection weight: 1937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1574 bar Injection volume: 2128 ccm Injection weight: 1937 g Screw L/D ratio: 22 Tool clamping system 500/... Clamping force: 500 t Mould plate dimensions: 1590 x 1470 mm Clearance between tie bars: 1000 x 800 mm Mould height: 450 mm Opening stroke: 1150 mm Maximum platen distance: 1600 mm Ejector stroke: 250 mm General data: Bedpfx Aexywctsb Tsdk Weight: 25,000 kg Dimensions [L x W x H] [m]: 7.3 x 2.5 x 2.6 Equipment: - 1 x pneumatic valve - 2 x hydraulic core pulls - euromap 67 interface - bimetallic injection system

Condition: good (used), For sale is a rotary table type 800E suitable for a Netstal SynErgy 2000 injection molding machine. Technical data: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table design: NC rotary tilting table Rotary/tilt axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table size: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine data: Machine weight approx. 3,500 kg Bjdsxvz A Njpfx Ab Tedk Total power requirement: approx. 17 kW Transport and loading can be organized throughout Europe on request and for an additional charge. Prices exclude VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Bsdpfx Abjxx Uf Ao Tsdk

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Bjdpexyqw Rjfx Ab Tsdk Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: used, Year of construction: 2015, operating hours: 23,000 h, clamping force: 450 kN, screw diameter: 70 mm, clearance between the columns: 810 mm, column diameter: 70 mm, displacement volume: 1,239 cm³, injection pressure: 199 bar, injection weight: 1,127 g, installation height: 850 mm, 4 core pullers; 70 mm bimetallic screw Bodpfx Abexxxa Ro Tedk

Condition: good (used), Year of construction: 1998, operating hours: 2,250 h, functionality: fully functional, machine/vehicle number: 174967, clamping force: 500 kN, overall weight: 21,300 kg, For sale: Injecting Molding Machine Arburg 320 S 500-150. The machine is in good condition. Bsdpfx Absxvxrze Tjdk Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500 - 150 Machine number (Serial number): 174967 Year of manufacture: 1998 Clamping force: 500 Voltage: 400 V 3∼ Frequency: 50 Hz Operating hours: 2,250 Current (unknown): 0.3 A Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 t Transport and loading can be organized across Europe upon request (at an additional charge). Prices exclude VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production needs? Or do you want to sell your own equipment? For more information or to get in touch, please visit our website.

Year of construction: 2016, condition: ready for operation (used), Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement. Bdsdpfx Aboxx Ufvo Tjk

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Bodpsrg Hh Njfx Ab Todk Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Year of construction: 2001, condition: ready for operation (used), Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement. Bdsdsxx Ufiopfx Ab Tjk