Used Vacuum Dust Extraction for sale (9,270)

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Bodpfjtqt Uxox Ak Eowl Thanks to the wide performance range, these devices are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Bwsdpfx Aksylb Ixo Eol For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Bodpfxorfcpmj Ak Eewl Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. Bwsdpfxstpwrqj Ak Eol The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Bwedpfoyibg Tjx Ak Eol Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. Bedpfx Aehqd Tvok Eowl The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. Bjdorhidmjpfx Ak Eewl By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive operation in woodworking shops and manufacturing facilities. The unit stands out thanks to its two high-capacity BIG-BAG containers, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it ensures effective extraction of sawdust, dust, and wood chips even during long-term continuous operation. Key Advantages Two BIG-BAGs – a unique market solution increasing waste collection capacity VIBER system – automatic filter shaking ensures consistent extraction performance TC housing – fully enclosed, sound-insulated design reducing noise and vibration DAMAGE PROTECT – mechanical protection safeguarding the impeller against damage from larger objects REHEAT – heat recovery from exhaust air, improving the facility’s energy efficiency Construction and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced impeller, ensuring stable, trouble-free operation and high suction performance of up to 11,300 m³/h. The housing is designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Precision and Performance With 64 polyester filters rated at 5 microns and the option to install an additional HEPA filter, the unit guarantees safe and highly efficient air purification. The high suction velocity (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG model is an ideal solution for: woodworking shops furniture factories operators of panel saws, edge banders, and sanders other facilities requiring a central dust extraction system Standard Equipment VIBER automatic filter cleaning system Two BIG-BAG containers Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT safety system Optional Equipment HEPA filter for ultra-fine particles BIG-BAG fill level sensors Bwedpfsudav Nsx Ak Eel Automatic fan reverse system Technical Specifications Power supply voltage: 400 V Power: 11 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 64 pcs Filtration area: 30 m² Inlet diameter: 350 mm Outlet diameter: 500 mm Capacity: 11,300 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3250 × 1100 × 3700 mm Weight: 820 kg

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS Bodjvzqtxepfx Ak Eswl 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms Bsdpfx Aksivta Ne Eewl mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Bwedpfxsiyyxco Ak Eol Very good condition, directly from production!!!

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Bsdeiu Hq Depfx Ak Ejwl Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: new, Year of construction: 2026, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! Bwedpeuc Uchofx Ak Esl dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns Bwjdpfxoudaazj Ak Eel NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY Bedpfx Aksuc Unqo Eowl 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Bwodpfx Asxn Rgusk Ejl Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Warehouse No.: 1051

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 Bwjdpfxeyg Exqj Ak Ejl - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system Bodpfxoryalis Ak Eswl -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -for: paint wall, paint booth -Motor: Explosion-proof -Engine power: 5.0 kW -Speed: 1455 rpm -Inlet connection: Ø 430 mm -Outlet connection: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg Bwsdpeca Iarsfx Ak Ejl

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h Bwodpfx Aot Rbhzjk Esl -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Bwedorp Ii Uopfx Ak Eel -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Condition: good (used), Year of construction: 2001, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: VEM 3,6 kW 1430 U/min Ex protected -Fan wheel: Ø 580 x 180 mm -Connection: inlet Ø 395 mm -Connection: Output 280 x 485 mm -Dimensions: 825/670/H825 mm Bwjdpfxjvnaabj Ak Ejl -Weight: 118 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.6 kW Bodpfx Aeca D Edek Eowl -Speed: 2800 rpm -Volume flow rate: m³/h -Pressure: Pa -Inlet connection: Ø 150 mm -Output connection: 150 x 110 mm -Impeller: Ø 260 mm -Number: 1x fan available Price: per piece -Dimensions: 450/400/H390 mm -Weight: 19 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.37 kW -Speed: 2800 rpm -Max. volume flow: m³/h -Max. pressure: Pa Bwsdpfxsdz Umpj Ak Eol -Inlet connection: Ø 190 mm -Outlet connection: Ø 190 mm -Impeller: Ø mm -Dimensions: 700/580/H560 mm -Weight: 37 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower Bwjdpfodz Umrjx Ak Ejl -Motor power: 1.1 kW -Speed: 2810 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 300 mm -Outlet connection: Ø 290 mm -Impeller: Ø mm -Number: 2 fans available -Price: per piece -Dimensions: 970/770/H660 mm -Weight: 46 kg