Used Upa 4 for sale (28,137)

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Working area X: 3,740 mm Working area Y: 1,570 mm Working area Z: 350 mm Kfodpfx Afex Hllxsfsa 4th axis: Yes 5th axis: 5-axis spindle 12 kW with additional C-axis locking Tool changer positions: 24 with disc changer; 10 in the left machine stand Vertical drilling spindles: 12 Machine table: Console table Table positioning automation: Yes 6 workpiece supports with e-motion Special workpiece clamping system: For frames Software: FORMAT 4 WOOD FLASH, TPA ALBATROS Includes: 12 frame clamps, 8 large and 4 medium suction cups 2 machining areas for pendulum operation with automatic central lubrication with mobile control panel with PC monitor with air conditioning for control cabinet with vacuum pump 90 m³/h with hand-held control device Availability: Approx. end of January 2026 Location: NRW

Year of construction: 1999, condition: excellent (used), We are offering a Heizbosch natural gas boiler. Kedpfx Aexxa Ivjffjfa Type LLR 4000 Boiler with a 4 MW output Year of manufacture: 1999 Flow temperature: max. 120 °C, Pressure: max. 6 bar Water capacity 5720 l It has only been used very rarely, primarily for cleaning two adjacent biomass boilers. Available from the end of March 2026

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Kfedpfevtl Tqox Affsa Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Kedpfxex Itrve Affjfa Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. Kfodjxzulhjpfx Affea 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 cm

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Kfedjw R Syispfx Affoa

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper Kfjdsw Nadtopfx Affsa - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Kedpfx Asxy Tlwoffofa

Condition: excellent (used), CATALOG NUMBER 7595 Technical data: - Loading hopper inlet: 1400x1400mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 600mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife dimension: 40x40mm - V-Rotor - Screen: 10mm - Hydraulic pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg ADVANTAGES Kfjdpfx Aov R E Ameffja – Made in Germany – V-Rotor – Technical documentation (DTR) – Hydraulic pressure drawer – Auto-reverse – Used chipper in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Kfjdpfx Afsx Ici Rsfea Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, diameter div. number 44x Kfjdpfx Afoxyzx Eefja tool adaptor SK 40

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Kodpfx Asw R St Njffefa

Condition: good (used), 4 x 4000 Litre Cream Tanks Ksdpsx Ap T Aofx Affefa Jacketed with scrape surface

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Ksdpfjq Ulucsx Affsfa Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: excellent (used), CATALOGUE NUMBER: 6651 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 4 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm, 4 kW 3) Left vertical: 120 mm, 4 kW 4) Top horizontal: 220 mm, 5.5 kW Kfjdpjh Up Ipsfx Affsa - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 top feed-in rollers, toothed, including 2 double rollers - 1 top feed-out roller, smooth rubber - Lower feed-out rubber roller - Pneumatically pressed rollers - Feed through Cardan shafts - Feed motor: 1.1 kW - Lifting motor: 0.37 kW - Electric thickness adjustment - Infeed table length: 1980 mm - Side pressure unit - Stepless feed speed adjustment: 8–16 m/min - Central lubrication system - Extraction port diameter: 5 x 140 mm - Fully enclosed in a cabinet - Dimensions (L/W/H): 3400 x 1500 x 1700 mm - Weight: approx. 1670 kg Net price: 39,900 PLN Net price: 9,500 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Kjdox Ich Hepfx Affjfa Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Length 2200mm Width 1120mm Height 2130mm Kfsdpfsv A Rq Tox Affoa Lifting height 3000mm Total weight 2935Kg

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Kodpfxoxmlins Affefa

Condition: used, Year of construction: 2014, 1 piece panel saw, manufacturer Format 4, model Kappa 550, serial no. 604.03.086.14, year of manufacture 2014, XMotion control, aluminium sliding table approx. 3 m, swing arm, fence with digital readout, internal no. I440067 Ksdpfx Aexzny Soffofa

Condition: used, Year of construction: 2017, functionality: fully functional, cutting height (max.): 2,200 mm, cutting length (max.): 4,200 mm, saw blade diameter: 250 mm, We are offering a Format 4 Kappa V60 vertical panel saw, purchased as an ex-display model. The machine has only been used very occasionally by us, serving as a backup or to supplement our processing capacity. The unit is in very good condition. Please feel free to contact us. Motor power: 4.5 kW (6.0 HP) - Cutting length: 4200 mm - Cutting depth: 60 mm - Cutting height: 2200 mm - Year: 2017 The listed price is net. Kfsdpfxsxg Ecne Affja

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900 mm Infeed height: 300 mm Shaft width: 1030 mm Shaft diameter: 700 mm Knife length: 1030 mm Number of knives: 3 pcs Screen dimensions: 70x70 mm Below: 2 toothed feed shafts Lower shaft motor: 7.5 kW Above: 2 toothed feed shafts Upper shaft motor: 7.5 kW Belt conveyor feeder Redler chain conveyor 5600 mm + 10600 mm, 2.2 kW Feeder belt width: 800 mm Main motor: 90 kW Reverse function Overall machine dimensions (L/W/H): 3300x3100x1700 mm Base for chipper dimensions: 3300x2080x1940 mm Feeder / Redler dimensions (L/W/H): 5600x900x1000 mm + 10600x1050x1600 mm Base for feeder belt dimensions: 5100x1300x2520 mm Total weight approx.: 16,000 kg Kedpfxewi Sm Ue Affefa ADVANTAGES – German-made – Redler-type chain conveyor equipped with scrapers – Reverse function – DTR technical documentation – Used chipper, in very good condition Net price: 258,900 PLN Net price: 61,640 EUR (according to exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Production: alloyed Kedpfx Afeuhn Dcjfofa Tip: 4 sec Turntable

Condition: used, Year of construction: 2012, 1 edge banding machine, manufacturer Format 4, model PERFECT 710, year 2012, serial no. 200.12.004.12, touchscreen control, internal no. I440048 Kedpfx Afoxzny Eefefa

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg Kfjdpfxeq Nnpfe Affja ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Catalogue number 7836 TECHNICAL DATA - Loading hopper inlet 800x600mm - Outlet for shredded wood diameter 160mm - Rotor working width 580mm - Main motor 22kW - Pump motor 0.75kW - Number of knives 15 pcs - Knife dimensions (crown type) 40x40mm - Screen 25mm - Hydraulic pusher drawer - Electric autoreverse - Dimensions (L/W/H) 1730x1200x1620mm - Weight 1100kg ADVANTAGES – German-made – Operating documentation (DTR) – Hydraulic pusher drawer – Autoreverse – Used chipper, in very good condition Kfodpfx Asx Arfbjffja Net price: 39,900 PLN Net price: 9,500 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)