Used Universal Turning Machine for sale (66,745)

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 32 mm, turning diameter: 320 mm, center height: 160 mm, turning length: 650 mm, three-jaw chuck diameter: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Model: DA-160 Centre height: approx. 160 mm Centre width: approx. 650 mm Turning diameter over bed: approx. 320 mm Turning diameter over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock holder: MK3 Kjdpswq Ehbofx Ahvedi Accessories included: Four-jaw chuck Ø 160 mm, 6x steel holders, 4x pairs of turning jaws External dimensions of machine: approx. 150x90x180 cm (LxWxH) The machine can be inspected and tested at our premises. Loading option: with stapler or crane Shipping costs on request (by postcode) You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Errors in technical data and prior sale reserved.

Condition: new, Year of construction: 2025, Z-MaT Power V10 New Design Vertical CNC Machining Center Siemens 828D, Shop Mill 15" Touchscreen with 5 axes (3+2, 255mmØ table) Axis Travels X-axis travel: 1050 mm Y-axis travel: 650 mm Z-axis travel: 600 mm Spindle nose / Table: 120–720 mm Work Table Table size: 1400 x 650 mm Max. table load: 1,000 kg T-slot size: 18 x 5 x 100 mm Spindle Data Spindle: SK 40, 12,000 rpm DDS, incl. oil chiller Spindle motor: 18.5/15 kW Tool Changer Double-arm gripper, 30 positions / 8 kg Feed Rates Cutting feedrate: 0–12,000 mm/min Rapid traverse (X/Y/Z): 30 m/min Dimensions & Weight Overall dimensions: 3,200 x 2,500 x 2,450 mm Total weight: 8,200 kg Standard Equipment - Full enclosure - Electronic handwheel (MPG) - Spindle oil cooler - LED work area lighting - Air blast through spindle - LED status signal light (3 colors) - Automatic central lubrication system - Coolant system with nozzles around the spindle - Coolant chip flushing system - Tapping without compensation chuck - 3-axis linear roller guides - Electrical cabinet heat exchanger - Ethernet, CF card, USB interface - Leveling bolts and machine feet Kjdpfx Ahjww A Dyevodi - Toolbox - Coolant gun - Air gun - Operating manual - CE compliance Including special accessories: - Spiral chip conveyor - Coolant through spindle, 30 bar - 3+2 axis table, 255mm diameter Note: Video shows a machine of a different series with 3+2 axis table This machine will be exhibited at EMO, Hall 12/D10, and will be available immediately after the show.

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min Kedpfx Aheytcf Uovjdi max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: ready for operation (used), Type: TVM 450/5 Uitzonderlijke frees- en draaibank voor verticale bewerking die zeer grote werkstukken kan bewerken. Zowel de binnen- als de buitendiameter van de werkstukken kunnen worden bewerkt! De machine bestaat uit een vaste buitenkolom en een beweegbare binnenkolom. Draaitafel: buitendiameter: 6300 mm binnendiameter: 3000 mm grootste diameter van het werkstuk: 9800 mm kleinste diameter van het werkstuk: 2220 mm maximaal gewicht op tafel: 300 ton Kodpfx Aheyr Tgmevedi rotatiesnelheid: 0,08 27 tpm rotatiesnelheid bij draaien/frezen: ,4 tpm Vaste externe kolom: ramafmetingen: 550 x 550 mm diameter van de spindel: 304,8 mm ISO 60 - 37 kW op spindel maximale hoogte van uitwendig draaien/frezen: 8700 mm min. hoogte van uitwendig draaien/frezen: 700 mm verticale slag: 8000 mm horizontale slag: 2030 mm Beweegbare binnenkolom: RAM-formaat: 280 x 280 mm max. diameter van inwendig draaien/frezen: 5180 mm min. diameter van inwendig draaien/frezen: 3048 mm max. hoogte van inwendig draaien/frezen: 5800 mm min. hoogte van inwendig draaien/frezen: 615 mm verticale slag: 5800 mm horizontale slag: 1120 mm Spiltoerentallen: 1,2 601 tpm Totaal vermogen: 250 kW 5-assige CNC-besturing

Condition: used, Year of construction: 2015, turning diameter max. 315 mm Kodovxwrcepfx Ahvedi swing diameter 315 mm turning height 175 mm Control SIEMENS 840 D SL x-travel 660 mm z-travel 300 mm turning speeds 7500 U/min tool change unit 12 fach VDI 40 total power requirement 36 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,4 x 2,2 x 2,7 m Renishaw LP2H Chip conveyor No chuck available No tool holders available No live tooling

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm Control SINUMERIK 840 D tool taper HSK-A 63 Kdjdpfjvxwinjx Ahvji A - axis ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared. Without Host-Computer for workpiece- tool-management. without coolant device - was connected to the central supply.

Condition: used, Year of construction: 2000, Deckel Maho DMU 50 eVolution 5-Axis Universal Milling Machine Condition: Used Year of manufacture: 2000 Technical Data Travel: X/Y/Z 500 mm / 420 mm / 380 mm Main spindle: Speed up to 18,000 rpm Power (40% duty cycle) approx. 15 kW to 35 kW (depending on spindle version) Tool holder: HSK-E 50 NC swiveling rotary table: Clamping surface Ø 500 x 380 mm Swivel range (B axis) 0° to 180° Kdodpfjyr Safex Ahvei Rotary range (C axis) 360° Max. table load: 200 kg Tool changer: 60 stations Feed rate: up to 20,000 mm/min Rapid traverse (X/Y/Z): up to 50 m/min Equipment Control: Heidenhain Measuring systems: Direct position measuring systems in all axes Accessories: Chip conveyor, internal coolant supply Weight: approx. 5,500 kg to 6,000 kg Installation area with peripherals: approx. 5.4 x 4.7 m

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Kdjdpfxsyr R Uhj Ahvsi Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Minor paint touch-ups; excellent condition—see original photos Kedoyfta Topfx Ahvedi A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control Kdsdpeygx Hnsfx Ahvsi - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Kodpfx Ahswym Nfevedi Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2002, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 10,000 rpm, Universal machining center Machine type: DMG DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 Kdsdox Uxc Topfx Ahvei TECHNICAL DATA: Travel paths: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm. Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2,500 x 2,000 mm Top table: D. 2,800 Features: Internal cooling (IKZ): bar Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun

Condition: good (used), Year of construction: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Center Year of manufacture: 10/2012 Control system: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel axes: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ±121° C-axis travel: ±211° Feed rates (X/Y/Z): 60/60/40 m/min New milling spindle installed on 19.05.2025 Equipment: - 5-axis fork-type head - Milling spindle 15 kW / 12 Nm / 24,000 rpm - For milling, drilling, sawing - Disc-type tool changer, 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for pendulum machining - Vacuum clamping plate by WITTE, 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit by LOSMA NEWTON N6 Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawings – see PDF. Kdodsyuufijpfx Ahvji Images, content, and specifications are provided without guarantee and are non-binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The delivery includes only those accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded truck) D-97944 Boxberg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: used, Year of construction: 1998, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Siemens type Millplus Table dimensions 630x500 mm tool taper ISO 40 Cooling through the spindle 40 bar Tool changer 60 Pos. Kdsdpfx Asyutv Tohvji no. of tables 2 Milling head automatically swivels horizontally/vertically The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 400 mm Control Heidenhain Kodpjyutv Hsfx Ahvjdi turning speeds 3150 U/min table surface area 700x350 mm Table load 400 kg spindle taper ISO 40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 450 mm table surface area 900x520 mm turning speeds 4000 U/min tool taper SK 40 Control Heidenhain type TNC 355 elec. Kdsdpfx Ahsyutuvsvsi weight of the machine ca. 2,7 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1988, x-travel 700 mm y-travel 550 mm z-travel 500 mm spindle taper ISO 40 control Heidenhain type TNC 155 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Kjdpfx Aoyuttlehvsdi We look forward to your visit. Your Markus Hirsch Team

Condition: used, x-travel 700 mm y-travel 600 mm z-travel 600 mm table surface area 630 mm 360 Grad angle of table min./max. 45/20 Grad turning speeds 6300 U/min control Pfilips type CNC 432 spindle taper ISO 40 total power requirement 27 KVA weight of the machine ca. 5,8 t dimensions of the machine ca. 4,1x2,3x2,4 m Year of manufacture probably 1989 Five-axis machine + swivel head Interface The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Kodoyutr Ijpfx Ahvsdi Your Markus Hirsch Team

Condition: used, Year of construction: 1989, x-travel 1800 mm y-travel 1000 mm z-travel 1000 mm table surface area 1000x1000 mm turning speeds 4000 U/min head swivability 90 ° Tool changer 45 control Heidenhain type 355 Kdodpfoyutqqjx Ahvei range L-W-H 5x3,2x3 mm Nr. : 4014 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2015, Universal machining center MCM TANK 1300, year 2015 CNC SIEMENS 840D ATC with 200 HSK100 tool positions Spindle 6000 rpm Kodpoyurwcsfx Ahvodi 4 pallets of 630 mm Travels: X 1300 x 1000 x 1100 mm Very good condition

Condition: used, x-travel 850 mm y-travel 500 mm z-travel 500 mm taper ISO 40 P.D.B. Kjdpjyuqmcofx Ahvsdi table-size 400x1250 mm volt 400 V Control Heidenhain TNC 355 total power requirement 7,5 kW

Condition: used, x-travel 1250 mm y-travel 1000 mm z-travel 1000 mm taper ISO 50 Table dimensions 650 x 1000 mm spindle speeds 32-1600 voltage 380 V Kjdpfxjyuqi De Ahvjdi Control Philips total power requirement 7,5 kW

Condition: used, x-travel 720 mm y-travel 360 mm z-travel 420 mm taper ISO 40 table-size 1000x320 mm volt 400 V total power requirement 5,5 kW Kodpfxeyuqiks Ahvodi weight of the machine ca. 7,5 t Universal milling head

Condition: used, x-travel 1100 mm y-travel 500 mm z-travel 600 mm taper ISO 40 P.D.B. table-size 500x1250 mm Kdsdoyuqfropfx Ahvoi volt 400 V Control Heidenhain TNC 410MA total power requirement 10 kW

Condition: ready for operation (used), Year of construction: 2011, VF - 2YT Year 2010 & 2011 Kedox Hc Uqopfx Ahvedi Travels S.A.E METRIC X Axis 30.00 in 762 mm Y Axis 20.00 in 508 mm Z Axis 20.00 in 508 mm Spindle Nose to Table (~ max) 24.0 in 610 mm Spindle Nose to Table (~ min) 4.0 in 102 mm Spindle S.A.E METRIC Max Rating 30.0 hp 22.4 kW Max Speed 10,000rpm Taper BT40 ATC 24 Bearing Lubrication Air / Oil Injection Air / Oil Injection Cooling Liquid Cooled Liquid Cooled c/w RT-160 and RT-160-2 Rotary Table c/w Tool measuring system 2 units