Used Universal Mixer for sale (4,956)

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 Nodpfxjyxhzao Ahvewd • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw Nedpfxjyxhyvo Ahvswd - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: new, Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed Nodsyxhycopfx Ahvswd • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools Nodpfxsyxhx Eo Ahvjwd • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, Njdsxmatnopfx Ahvjwd switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 90004714, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, workpiece weight (max.): 800 kg, total height: 3,200 mm, total length: 8,000 mm, total width: 5,000 mm, table width: 500 mm, table length: 630 mm, overall weight: 15,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 115, MIKRON AGIE CHARMILLES HPM 800 U Universal Machining Center - Serial number: 107.55.00.099 - Tool holder: HSK A 63 - incl. EROWA robot system - A-axis travel: +91/121° - C-axis travel: 360° Note: The main spindle should be overhauled. Further technical data to follow! Note: The machine can be transported on a truck with standard transport width! Nwjdpsyxg Skefx Ahvsd Note: The item is available as of 07.04.2026 and must be collected definitively at a date to be agreed upon. FCA D-97944 Boxberg – loaded on truck

Condition: used, Year of construction: 1983, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 10,000 mm, For sale: PORĘBA TPK-80/10M universal lathe, year of manufacture 1983, in very good technical condition. Availability: in stock, under power, available for inspection and testing at any time. Nsdpfsyxgm Uex Ahvowd Standard equipment: Tailstock Coolant pump Tool holder Additional equipment: 1 x Traveling steady 1 x Steady rest 40–400 mm 1 x Steady rest 400–600 mm 1 x 3-jaw self-centering chuck Ø 500 mm Technical specifications: Distance between centers / turning length: 10,000 mm Swing over bed: 800 mm Swing over carriage: 530 mm Swing in gap: 1080 mm Spindle bore: 95 mm Max. workpiece weight: between centers: 6,000 kg between centers + 1 steady rest: 7,500 kg between centers + 2 steady rests: 9,000 kg Number of spindle speeds: 21 Speed range: 8 – 800 rpm Number of feeds: 80 Feed range: Longitudinal: 0.1 – 12.8 mm/rev Cross: 0.05 – 6.4 mm/rev Main motor power: 16/22 kW (1st / 2nd gear) Dimensions: Total length: 12,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 11,200 kg

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Nwsdovvi I Ropfx Ahved

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Nwodpfx Ahovvi Nzevjd

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Nodpfxsvvi Rfs Ahvowd

Condition: used, Year of construction: 1999, This Hermle U 1000 T - CNC machining center (milling machine) is being auctioned in our online industrial auction / machinery auction insolvency auction MarGenius GmbH & Co. KG - machines, tools, materials, and office equipment. Nwedpfx Asyxd Ivjhvsd

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11790001067, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 40 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,600 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Input unit X/Y/Z axis: 0.001 mm - Travel measuring system resolution X/Y/Z axis: 0.001 mm - Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E Nwsdpfxsyxckvs Ahvod - Max. tool length from spindle nose: 200 mm - Max. tool weight for automatic tool change: 1 kg, total tool weight in magazine: 24 kg - NC rotary table with swivel axis - C-axis clamping surface: 190 mm diameter - Swivel range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Loading capacity: max. 10 kg - Including the tool holders shown in the photos in the tool magazine - Also includes an additional external tool changer system (30-position) from manufacturer ROBOWORKER, type: LM 100 Note: The machine can be transported on a standard truck! Note: This item is available immediately! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: used, Chemical mixer, stainless steel, chemical mixer 2000 L, used machine Manufacturer: Chemplex Type: T250 Electrical power: 20 kW heating Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Description: Chemplex-manufactured general-purpose chemical mixer with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). Nwedjyc Np Eopfx Ahved The vessel is an atmospheric tank with a DN100 bottom outlet, suitable for high-viscosity and slurry materials as well. Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with: Spiral ribbon anchor(Anker) mixer Propeller mixer It has a flat lid, which is openable and fitted with a safety grid. The lid contains 5 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a safety-closed (fail-safe closed) function.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,250 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table width: 800 mm, table length: 630 mm, table load: 1,400 kg, overall weight: 12,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10,250 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Hermle C42U Dynamic in excellent, well-maintained condition. Travel Paths: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: Control: Heidenhain TNC 640 Spindle interface: HSK-A63 Spindle speed: 18,000 rpm Large machine table: 800 mm x 630 mm Swivel rotary table with tandem drive C-axis with torque drive Dynamic version linear axes IKZ (internal coolant supply) 80 bar with variovalve Scraper belt conveyor Tool changer plus Additional tool magazine ZM50 for a total of 92 tool stations Manual cabin door Manual cabin roof Laminated safety glass window Nwsdpfx Aheyma Nkovjd Comfort operator panel External minimum-quantity lubrication Tool measurement A2 Blum (tool breakage/measurement) 3D probe M&H Internal air blow External air blow Bed flushing Handte Compact extraction unit Electronic handwheel Purge air for glass scales Electronic thermal compensation with control functions HIMS basic package Special stop block Interpolation turning TNC 640 Rotoclear visibility aid and more… The machine can be inspected under power by prior arrangement. Machine is immediately available! Loading will be handled by us!

Condition: used, Year of construction: 2019, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SlimLine Siemens turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range B: -5 / +110 ° rotation range C: 360 ° T-slots 7x 14 x 63 mm Nwsdpfeyw Titox Ahvsd number of toolpositions 30 pos. max. tool weight 8,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 2,7 sec change-time chip to chip 7,0 sec rapid traverse X/Y/Z: 30 m/min Feed force 4,5 kN feed speeds 1 - 30.000 mm/min total power requirement 30 kVA weight of the machine ca. 4,7 t dimensions of the machine ca. 4,5 x 3,5 x 3,2 m CNC - Milling Machine Universal DMG MORI - CMX 50 U - 5 Axis - swivable rotary table - Spindle-hrs.: only ca. 2264h - Power On Hours: ca. 6706h - incl. div. cutting inserts, milling cutters, mounting aids

Condition: used, Used Morton-Lödige FKM1200D ploughshare mixer approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has (6) stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by an 18.5kW , 1450rpm geared motor through a Renold Ltd gearbox with 49/4 : 1 ratio giving approximately 118rpm output on the shaft. Unit has a pneumatically operated bottom entry discharge valve. Unit is mounted on a mild steel frame. Dimensions: 1750mm x 1000mm Njdpfxsyw S R Ns Ahvjwd

Condition: used, Model: 750 Year: 2005 Condition: Used Serial number: 13909 Stock number: 1936 Mixer: double shaft paddle mixer Capacity: 2000 liters, up to 1000 kg Speeds: 15 / 30 RPM Infeed height: 2200 mm Nwodpjyw Shhsfx Ahvsd Outfeed height: 800 mm Vacuum pump: liquid ring SIHI LEMB 161 Water: 800 liters/hour Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 13kW Dimensions: 2800 x 2300 x 2400 mm Weight: 2500 kg

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, "HURON" system, swivels over 2 axes, every angle adjustable. Spindle taper: ISO 40 Reach approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight: approx. 82 kg Accessories / Special features: • Manual tool clamping Nwodpfx Ahodbny Esvsd • Main spindle and all shafts and gears made of case-hardened and tempered chrome-nickel steel • 2 rotatable axes making every setting angle possible! "HURON" system • Tapered drives ground according to "KLINGELNBERG" system • Main spindle bearings made of high-precision tapered roller bearings • 1 tool drawbar • Operating manual Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Manufacturer: Kallfass GmbH Model: Shrink Tunnel Universal 950 HV Year of manufacture: 2007 Dimensions: approx. 2540 x 1655 x 1600 mm (L x W x H) Weight: approx. net 750 kg / gross 820 kg Nodpfxjyw Rm Aj Ahvewd Technical data: Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of heated tunnel hood: 1700 mm Length of additional insulation hood: 2200 mm Tunnel discharge, extended: approx. 600 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 39 kW Rated current at 400 V: 56 A in single operation Universally applicable, high-performance shrink tunnel with laterally adjustable air flaps and outlet openings, adjustable from the outside at the bottom, for precise control of hot air flow, ensuring optimal shrink results even with products of challenging shapes. The recirculation system, the tunnel hood with an additional dual-chamber system, and significantly increased overall insulation provide energy-efficient operation. Equipped with rod chain conveyor, infinitely variable speed control. Functional guarantee, no warranty. Offer valid for 30 days, subject to prior sale. Please note that all machines are delivered without power cables.

Condition: ready for operation (used), Year of construction: 2015, DMG UNIVERSAL MACHINE CENTER HSC 105 Linear Year 2015 Travel : X1.050 Y800 Z 500mm Heidenhain iTnc 530 control Spindle speed 28.000rpm ATC 32 HSK-A63 Table Ø900mm Njdpeytpgfefx Ahvewd NC B axis -10o ~ +110o NC C axis 360 x 0.001o Electronic hand-wheel Chip conveyor Direct measuring system.

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm total power requirement 46 kW weight of the machine ca. 6 t dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg Nwedpfxow Inr Ns Ahved --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron

Condition: used, Year of construction: 2004, frequency 50 Hz weight of the machine ca. 2,510 t 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30" x 14.3" Nodjxgv D Aspfx Ahvowd Max Table Load: 550 LBS X Axis: 24" Y Axis: 12" Z Axis: 20.47" Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t Nwjdpfswbi A Dox Ahvsd - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: excellent (used), Year of construction: 2007, CNC Machining Center Hedelius RS60S-600 Control: Heidenhain iTNC 530 Year of manufacture: 2007 Internal machine no.: 10 Nwsdpfoyk Tawox Ahvsd Travel paths: X-axis: 600 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area – rotary/swiveling table: Ø600 x 480 mm Swiveling range: +10° / -90° Tool holder: SK 40 Tool magazine: 30 stations Main spindle Weiss: 50 - 12,000 rpm Accessories Chip conveyor Mesh filter system 500 L Internal coolant supply (IKZ)

Condition: used, all stainless steel 2 front discharge guards 2 mixing directions safety lid Nwsdpfx Ahoyw H Shovsd overall dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm