Used Universal Cutter for sale (6,536)

Condition: good (used), Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm Itjdpfx Afjb A Hfcsfsr -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 840 mm Measurements depth 1090 mm Measurements height 1960 mm Machine weight 620 kg Main Drive Number of axis 5 Itjdpfx Afex H A Rrofor This 5-axis ESPE LAVA CNC 500 was manufactured in 2010, featuring a robust universal machining center design. It operates on a supply voltage of 200-240 V AC and supports a nominal output of 0.92-1.1 KW. The machine dimensions are 1090 mm in width, 1960 mm in height, and 840 mm in depth, weighing approximately 620 kg. If you are looking to get high-quality milling capabilities, consider the ESPE LAVA CNC 500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 950 de Luxe In-Line Year of construction: 2006 Dimensions: approx. 2500 x 1650 x 2100 mm (LxWxH) Ijdpfx Afsvfd Rfjfotr Weight: approx. net 800 kg / gross 880 kg Technical Data: Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 920 mm, bottom 920 mm Working height: 815 - 915 mm Passage height: 500 mm Power connection: 400 V three-phase current Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 25 L/cycle Touch panel: Siemens TP177 Control system: Siemens S7 This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor Manufacturer: Kallfass GmbH Type: Shrink tunnel Universal 950 HV Year of construction: 2006 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical Data: Technical data: Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of the heated tunnel hood: 1700 mm Length of the additional insulating hood: 2200 mm Tunnel outlet, extended: approx. 600 mm Working height: 800 - 900 mm Power connection: 400 V three-phase current Rated power: 39 KW Rated current at 400 V: 56 A for single operation Particularly powerful shrink tunnel with bottom and laterally adjustable for precise control of the hot air outlet for optimum shrinking results even with shrinking results even with difficult product contours. Equipped with 2 hot air blowers and infinitely adjustable bar chain transport. Function guarantee, no warranty

Condition: good (used), functionality: fully functional, machine/vehicle number: 173741, total height: 1,700 mm, total length: 800 mm, total width: 700 mm, grinding wheel diameter: 70 mm, overall weight: 400 kg, FANUC/STAMA WS II tool grinding machine Itedpfx Afex Hx Akofor - Operating voltage: 220/380 V - Frequency: 50 Hz Note: The item must be collected between 04 and 12 March 2026 on a binding date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Ijdpfx Aoxllcljffjtr

Condition: excellent (used), Year of construction: 2004, operating hours: 12,541 h, X-Axis: 805 mm (with swivel-rotary table) Y-Axis: 1,000 mm (Transverse) Z-Axis: 655 mm (Vertical spindle mode with swivel table) Spindle Speed: 15,000 RPM Itsdpfx Aox Htp Soffer Taper: ISO-B40

Condition: good (used), Universal milling angle head, milling angle head Itedpfx Afsb A Nu Rofjr -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Movement X-Axis Movement 270 mm Z-Axis Movement 250 mm Y-Axis Movement 240 mm B-Axis Min 110 º C-Axis Movement 360 º This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. Application Types Itodpfx Aox H A Nbjffsr Milling

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs Iedow Am Nqjpfx Affjtr 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 450 A-axis travel mm: +/- 110 C-axis degrees: +/- 360 Number of pallets: 1 Table dimensions mm: - Max. table load kg: - Feed rate mm/min X, Y, Z: 20,000 Max. rapid traverse m/min X, Y, Z: 35,000 Spindle speed rpm: 50 - 10,000 Spindle power kW: - Taper type: ISO-SK40 Torque Nm: - Tool changer type: Chain Tool changer positions: 30 Max. tool diameter mm: - Max. tool diameter with adjacent pockets empty: - Max. tool length mm: - Max. tool weight kg: - Coolant tank capacity l.: - Through-spindle coolant bar.: - EQUIPMENT: Zero-point clamping system: EROWA MTS / EROWA MTS RENISHAW OMP60 probe MACHINE DIMENSIONS Length mm: 2,130 Itjdjxak A Hjpfx Affer Width mm: 2,300 Height mm: 2,750 Weight kg: 6,500

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Itsdpfx Afjxxypysfsr

Condition: used, Year of construction: 2002, controller manufacturer: Siemens, controller model: 840D, Working Area – Milling Travel X-axis: 4000 mm Travel Y-axis: 3500 mm Travel Z-axis: 1500 mm Travel W-axis: 1500 mm Portal / Upright Clearance: 2500 mm Table Clamping area (left-right): 3000 mm Clamping area (front-back): 2000 mm Workpiece weight (max): 10,000 kg Working Spindle / Head Vertical working spindle Speed range from: 5 rpm Speed range up to: 6000 rpm Number of gear stages: 2 Drive power (max): 45 kW Torque (max): 1250 Nm Max. distance spindle to clamping surface: 3500 mm Tool Magazine Number of tool positions: 200 Itedpfjx I Srbsx Affor Max. tool diameter: 135 mm – With free adjacent position: 250 mm Max. tool length: 400 mm Max. tool weight: 50 kg Dimensions / Weights Space requirement length: 13,000 mm Space requirement width: 11,300 mm Height above floor: 7350 mm Height below floor: 1500 mm Additional Equipment Drilling/Milling Angular milling head: yes automatic tool clamping: yes ball screw drives: yes guideway covers: yes coolant system: yes high-pressure cooling system (internal coolant supply): yes full work area enclosure: yes

Condition: good (used), Gear cutter, module cutter, hob cutter, tooth form cutter, module milling head, end mill cutter, roller cutter, milling cutter, hob cutter, splined shaft hob cutter -Diameter: 63 mm -Height: 40 mm -Reach: 22 mm Quantity: 2x milling cutter fixing disc 650.054.06A SPAN. 5° EV4CO Itjdeb A Rcgjpfx Affjr Price: complete -Sale: only complete set -Weight: 1.5 kg

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Very good condition, ready for production. Iodpfxsx Hqmuo Affstr The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Condition: good (used), Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel Itedpfx Ajb A Rgzsffer -Ideal for working in trenches -Transport case -Weight: 11 kg

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Ijdpfxjx Hqmns Affotr Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg Isdjb A Rk Ispfx Affetr

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter Iodpfjb A H Ihjx Affotr -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 Itodpsb A Nurjfx Affor -Weight: 10 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 130 mm -Number of teeth: 10 -Indexable inserts: Carbide -Recording: SK50 Isdjb A Hg Hjpfx Affotr -Weight: 10 kg

Condition: good (used), Radius cutter, milling cutter -Finishing cutter: -1x diameter: 115 mm height 36 mm R18 mm -1x diameter: 120mm height 35mm R17.5mm -1x diameter: 90 mm height 20 mm R10 mm -1x diameter: 120mm height 40 mm R 20 mm -Type: HSS and SS Isdeb A R E Rspfx Affetr -Number: 4 pieces -Sale: only complete -Weight: 5.6 kg

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool Iedpfx Afob A Rcfjfetr -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool Itsdpfeb A R Hwjx Affjr -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outside: Ø 150 mm -Height: 20 mm -Hole: Ø 30 mm -Number: 1 cutter Isdpfx Afob D I D Hsfetr -Price: per piece -Dimensions: 150/150/H20 mm -Weight: 2.2 kg

Condition: good (used), Disc cutter, saw blade, cutter Itjdob A Strspfx Affor -various: diameters -Type: HSS/E Price: per set -Quantity: 2 sets available -Weight per set: 3 kg