Used Universal Cutter for sale (6,531)

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Lodpfexxypyex Affjak

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Lajdpjx Hn A Tefx Affjk Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: excellent (used), Karl Schnell 225 continuous cutter Laodpfx Afex I Sxujfok Year of manufacture: 1999

Condition: used, Year of construction: 2002, controller manufacturer: Siemens, controller model: 840D, Working Area – Milling Travel X-axis: 4000 mm Travel Y-axis: 3500 mm Travel Z-axis: 1500 mm Travel W-axis: 1500 mm Portal / Upright Clearance: 2500 mm Table Lasdpfx Afox I Srbefok Clamping area (left-right): 3000 mm Clamping area (front-back): 2000 mm Workpiece weight (max): 10,000 kg Working Spindle / Head Vertical working spindle Speed range from: 5 rpm Speed range up to: 6000 rpm Number of gear stages: 2 Drive power (max): 45 kW Torque (max): 1250 Nm Max. distance spindle to clamping surface: 3500 mm Tool Magazine Number of tool positions: 200 Max. tool diameter: 135 mm – With free adjacent position: 250 mm Max. tool length: 400 mm Max. tool weight: 50 kg Dimensions / Weights Space requirement length: 13,000 mm Space requirement width: 11,300 mm Height above floor: 7350 mm Height below floor: 1500 mm Additional Equipment Drilling/Milling Angular milling head: yes automatic tool clamping: yes ball screw drives: yes guideway covers: yes coolant system: yes high-pressure cooling system (internal coolant supply): yes full work area enclosure: yes

Condition: used, Year of construction: 1969, x-travel 710 mm y-travel 250 mm z-travel 400 mm table-size 1200 x 300 mm control konventionell tool adaptor SK40 turning speed range 50 - 2500 U/min total power requirement 2,2 kW weight of the machine ca. 1,7 t dimensions 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device Laodpfsx I Sf Ujx Affjk - Documentation

Year of construction: 2008, condition: ready for operation (used), A round and long moulding machine Eberhardt is available. Moulding length: 1450mm, dough piece weight range: 150g-1500g, moulding capacity: approx. 650-1000pieces/h, machine weight: approx. 650kg. Including additional moulding bell (650g-1750g) and touch panel control. Documentation available. An on-site inspection is possible. Laedpfx Afjx I Rpfsfjk

Condition: used, mileage: 178,123 km, power: 240 kW (326.31 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 17,155 kg, maximum load weight: 8,845 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, next inspection (TÜV): 01/2026, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 4, total length: 10,045 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, traction control, Zöller Medium XXL No. A0002260 Zöller 456.130 120/240/1100/U5 sunblinds, side camera. Non-binding offer – subject to change and prior sale – sale takes place under exclusion of any warranty – all information provided without liability! Company closed for holidays from 20.12.2025 to 04.01.2026. We wish you happy holidays and a successful start into the new year. Laedpswp Hduofx Affsk

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Laodpfxex Hkd To Affsk Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Year of construction: 2010, condition: used, Type of fuel: Electric Power: 2 kW (3 HP) Auction item. Working condition cutting machine for various materials. Laedpfxox I Iufj Affjk Sold as seen in the photos. Can cut about 10 centimeters thick.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 96 212 013, Technical data: - Max. working width: 2540 mm Ljdpfxex I H T Hs Affjak - Max. material thickness at 40 kg/mm² tensile strength: 6 mm - Bending angle setting electronically preselectable: 0 - 135° - Automatic sequence control for a complete work cycle - Maximum opening width / stroke of upper beam: 350 mm - Height adjustability: - of bending beam: 100 mm - of lower beam: 100 mm - Upper beam drive: 400 V / 10 kW - Bending beam drive: 400 V / 4 kW - Swivel arm control panel with digital angle display - Electric foot switch - Space requirement approx. W 3800 x H 1650 x D 1700 mm - Weight approx. 6500 kg

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing Ljdpskvrptefx Affoak -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Year of construction: 2007, condition: ready for operation (used), This Hypertherm Powermax 105 Sync XXL plasma cutting system is offered. Table size X/Y/Z: 2500mm/10000mm. Cutting heads: 3. The system can be inspected under power by arrangement. Lasdpfxex I Rpls Affok

Condition: new, Year of construction: 2025, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Lajdpsxdbxyofx Affek Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Lsdpsx Hkd Hofx Affoak Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV - 1680x1160 Machine little used, in very good condition, new upgraded electronics + laser protection Equipment: Ledpfxeuwruao Affsak - pneumatic clutch and brake - control panel - New upgraded electronics + laser protection - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - operating tools - hard plate for pressure

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: Lasdpfxox Hhcto Affsk - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: excellent (used), Gear milling cutter, modular milling cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 2 pieces Lajdpfsv D Exnjx Affek -Type: Mod.4,5 R1 EW 20° see photos -Hole: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 170/90/H90 mm -Total weight: 3.4 kg

Year of construction: 2007, condition: ready for operation (used), Number of knives: 5, scoring pairs: 8, tool positioning accuracy: +/-0.5mm, min. scoring gap: 0.7mm, min. blank width: 82mm, min. scoring distance: 60mm, knife diameter: 240mm, working width: 2500mm, max. corrugated board thickness: 16mm, web speed range: 30m-120m/min, max. stack height (outfeed): 1400mm. Machine dimensions X/Y/Z: approx. 4300mm/3500mm/2200mm, weight: approx. 8000kg. Documentation available. On-site inspection is possible. Lajdpox I Rp Sjfx Affjk

Condition: used, Year of construction: 2003, Technical details: grinding length: 1500 mm weight of the machine ca.: 12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Lajdpfx Ajx Hgiljffsk Siemens 840D control system *

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Lasdpfx Afjv Igg Iefjk Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards Lajdpfex I Acqsx Affok – Working tools – Hardened pressure plate

Condition: good (used), Code: 0263 Brand: MONGUZZI Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Cutting length 4300 mm Max register depth 1500 mm Ledpex Hfr Sofx Affeak Min register depth 25 mm Useful presser opening 80 mm Presser width 360 mm Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Laodpfx Asv Igghoffek Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III - 1480x1070 Machine little used, in very good condition Equipment: - pneumatic clutch and brake - control panel - quick release frame + additional frame - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - operating tools - hard plate for pressure Lajdpfx Afjuwrtiefjk

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III - 1480x1070 Machine little used, in very good condition Equipment: - pneumatic clutch and brake - control panel - quick release frame (electric) + additional frame - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - operating tools Ljdpfx Aeuwrrrjffoak - hard plate for pressure