Used Ultrasonic Welding Machine for sale (66,938)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm Ndedpfx Aoykvdlof Sob - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Ndjdpjz Afhijfx Af Ssb Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: good (used), 1 used water-cooled spot welding machine Technical data: Max. welding power: 23.7 kVA Rated power at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Coolant flow rate: 4 l/min Weight: 77 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Nsdpfjy Naq Isx Af Ssdb

Year of construction: 2000, condition: used, Selecta S2T welding machine. Ndodpfoz Dqx Hsx Af Seb

Condition: used, Technical data: see image Ndjdpjxz Amyjfx Af Sob

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Njdpfozz Sdzex Af Sedb Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, input voltage: 400 V, total height: 1,700 mm, total width: 1,300 mm, total length: 1,000 mm, welding power (max.): 45 kVA, overall weight: 850 kg, Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 1000*1350*1700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Nodpjzz R I Esfx Af Sodb Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Nsdpsrtvi Uefx Af Ssdb Overall in very good condition.

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation Ndodpfx Aortvi Rof Seb - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: excellent (used), Year of construction: 2011, Four-head welding machine URBAN, type AKS 6410/4, from left to right, maximum welding dimensions: 3,500 x 3,000 mm, WINDOWS control, weld bead limitation of 0.2 mm for colored profiles, pressure bar for sealing, designed for single-shift operation, technically overhauled and fully functional. Nedoz Dk Nlspfx Af Sjdb Includes cooling table, L = 3.0 m, TBA (URBAN conveyor belt).

Condition: used, Year of construction: 2004, functionality: fully functional, Friction welding machine RS125, max. upsetting force up to 190 tons, Nedpfxoq Aurve Af Sodb KUKA friction welding machine Modernized by the manufacturer KUKA, 2016. This machine is currently undergoing a complete overhaul in our workshop. The machine bed has been extended to allow welding of components up to 6 m in length, with automatic stop adjustment. Boring bar tubes with a diameter of 178 mm are included. Equipment: servo-hydraulics, facing unit, steady rest, 2/3 jaw chuck, "positioned welding" possible, e.g., for propeller shafts. Currently, the friction welding machine is being used in our production for the manufacturing of hydraulic piston rods, aluminum-brass connections, the production of small and large screw taps, and the production of pressure rollers, etc. You are welcome to inspect this machine.

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Ndsdpjvuz N Rofx Af Ssb Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly Nedjdzqbvepfx Af Sodb - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg In good condition

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Nodpfxjdzqacj Af Sjdb Good condition

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Ndsdpfsd N E Rvjx Af Ssb Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 22,4kA Electrode force: 17-178daN Throat depth: 180-500mm --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months Nedpfjz Alfnex Af Ssdb --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LP20250813JWL-1, type of input current: AC, total height: 900 mm, total width: 730 mm, total length: 980 mm, input voltage: 220 V, overall weight: 190 kg, type of cooling: water, sheet thickness aluminum (max.): 3 mm, laser power: 1,500 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, compressed air connection: 15 bar, Equipment: type plate available, This brand-new 2025 handheld fiber laser welding machine is offered in unused condition with 0 working hours and is ready for immediate operation. Designed for high-speed, high-precision welding, it delivers clean, strong welds with minimal heat distortion and excellent finishing quality. Compared to traditional MIG/TIG welding, this laser welding system offers significantly faster production speeds, reduced post-processing, lower consumable costs, and easier operation. The machine is compact, user-friendly, and suitable for both experienced operators and first-time users. Machine Condition: Year of manufacture: 2025 Condition: Brand new / unused Working hours: 0 hours Location: Portugal Availability: Immediate delivery Documentation included Ndsdpfxeyztpbs Af Sjb Technical Specifications: Laser power: 1500W Laser type: Fiber laser Welding mode: Handheld Cooling system: Industrial water cooling Power supply: 220V Wavelength: 1070 nm Welding thickness: up to 4 mm (depending on material) Operation mode: Continuous / Pulse (depending on configuration) Welding speed: up to 4x faster than conventional TIG welding Suitable Materials: Stainless steel Carbon steel Aluminum Galvanized steel Advantages: High welding precision Minimal thermal deformation Clean weld seams with little or no finishing required Low maintenance High production efficiency Ideal for industrial fabrication, metal furniture, automotive, and sheet metal applications Videos, additional photos, and live demonstration available upon request.

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Njdpfx Afowkr Ins Sodb Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 Ndsdpfx Afoxlr Tdo Ssb rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Ndjdpsium Niofx Af Sob Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: used, functionality: fully functional, machine/vehicle number: 199715, input voltage: 380 V, T-joint welding machine IDEAL. We only used it to weld a single product in small quantities. We don't know its history before that (almost 30 years ago), as we acquired the machine at a bankruptcy auction back then. Nedpfxozzzgfs Af Ssdb

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Njdeztn Sxopfx Af Sedb Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Nedpfx Afjzqucfo Sodb Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode Nsdpfx Afezzv N Is Sjdb (see more technical details on photo) Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Nodpfx Afozzv Hmo Sjdb Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG