Used Tylor Ice Careem Machinse for sale (46,217)

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg Chjdpfexvp S Ejx Ab Tsf

Condition: used, This listing is for a Molecular Devices SpectraMAX 190 Absorbance Microplate Reader. The unit is in full working condition and is ready for immediate release. The Molecular Devices SpectraMAX 190 Absorbance Microplate Reader is a versatile and high-performance bio-analytical instrument designed for life science research and development. With precise measurements and a broad wavelength range, it is ideal for a variety of applications, including DNA analysis and pharmaceutical research. Key Features: Wide Wavelength Range: Operates from 190 to 850 nm, enabling measurements across UV and visible spectra for diverse applications. Tunable Monochromator: Allows wavelength selection in 1 nm increments for flexibility and precision in absorbance measurements. Narrow Wavelength Bandwidth: Features a 2 nm bandwidth for enhanced resolution and specificity. Broad Photometric Range: Measures from 0 to 4.0 OD with a high photometric resolution of 0.001 OD, ensuring accuracy for both high and low absorbance samples. PathCheck Sensor Technology: Ensures less than 5% error compared to cuvette readings, delivering reliability in microplate-based measurements. Xenon Flash Lamp Light Source: Provides stable, high-intensity light for consistent results over time. Rapid Measurements: Endpoint readings in as little as 12 seconds and kinetic measurements with a minimum 9-second interval streamline workflows. Temperature Control: Operates from ambient + 4°C to 45°C with ± 0.5°C uniformity at 37°C, ensuring well-to-well consistency for temperature-sensitive assays. Isothermal Reading Chambers: Maintains a uniform environment with less than 1°C variation when temperature regulation is not enabled. Applications: The SpectraMAX 190 is ideal for: Codexxz Tmopfx Ab Tohf DNA Analysis: Quantification and purity assessment. Pharmaceutical Research: Drug discovery and development assays. Life Science Research: Enzyme kinetics, protein quantification, and more.

Condition: used, Year of construction: 2017, machine/vehicle number: 0201-240012, Ficep 1201 DE Excalibur drilling machine for flat steel and profile processing with longitudinally movable drilling unit. The drilling system has a CNC-controlled drilling unit that moves in the longitudinal direction (X-axis), adjustment 0 - 15,000 mm, an automatic tool changing system with HSK A80 holder for 6 tool positions. The 19 kW drilling spindle drive makes the drilling machine suitable for use with carbide drilling tools. Technical details: Profile and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for positioning in longitudinal direction on the workpieces. Horizontal drilling head with one drilling spindle Additional stroke of the drilling head in X-axis direction Clamping device for material clamping Device for position detection Profile size - max.: 1200 x 1200 mm Number of drilling spindles: 1 pc. Drilling diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 Chodpfxou Rn Tfe Ab Tef

Condition: good (used), Year of construction: 2001, Serial no. 10487, 4 colours Chjdpfxext Iumo Ab Tsf +++ Attention: The machine is part of an online auction! +++

Condition: used, Year of construction: 1988, functionality: unexamined, Equipment: documentation/manual, Good morning, I have for sale a Fellows gear shaping machine, Tos OHA 32A. Complete technical and electrical documentation available. Price: 11,000 EUR Technical specifications: Machine type: OHA 32 A Manufacturer: TOS Čelákovice Year of manufacture: 1987/1988 Workpiece diameter for external gearing: 30 – 320 mm Maximum basic diameter for internal gearing: 300 mm Maximum outside diameter for internal gearing: 400 mm Maximum gear module: 6 Maximum width of shaped gear: 70 mm Number of gear teeth: 12–300 Maximum workpiece weight with clamp: 150 kg Distance from tool support surface on the slide to table surface: min. 30 mm, max. 310 mm Motor power: As per technical data sheet Chodpsxwp Ngofx Ab Tjf Machine dimensions (L x W): 2150 x 1420 mm, machine height: 1980 mm Machine weight: 4300 kg Electrical equipment: Total connected power 15 kVA

Condition: ready for operation (used), TOS Gear Hobbing Machine FO16 Maximum wheel diameter: 1,600 mm Gear width: 560 mm Maximum module: 16 Maximum workpiece weight: 7,000 kg Table surface area: 1,350 mm Turning speed range: 16–80 rpm Feeds – axial: 0.05–1.5 mm/min Feeds – radial: 0.25–6 mm/min Feeds – tangential: 0.13–4 mm/min Cedpfexwl R Tox Ab Tohf Electrics – voltage/frequency: 380/50 V/Hz Total power requirement: 12 kW Machine weight approx.: 18.5 t Machine dimensions approx.: 4.3 x 2.0 x 3.2 m The machine includes one additional head, change gears, and arbors. Video of the machine under power available.

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Maximum temperature: 180 ° C The temperature is adjustable Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Chsdpfed Tiu Iox Ab Tjf Width: 1250 mm Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!

Condition: used, This listing is for The Molecular Devices VERSAmax microplate reader The unit is in full working condition and is ready for immediate release. The Molecular Devices VERSAmax microplate reade is a versatile instrument designed for precise absorbance measurements across a wavelength range of 340 to 850 nm. Utilizing a grating monochromator, it allows users to select exact wavelengths without the need for filters, offering flexibility for various assays. The reader supports dual-wavelength readings and accommodates different plate types, including round-bottom, flat-bottom, and half-area well plates. Temperature control up to 45°C enables kinetic assays under controlled condition Csdoxwc Rdopfx Ab Tohf

Condition: new, Year of construction: 2025, machine/vehicle number: A1481630, Complete finishing line max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Chedjbqh R Tjpfx Ab Tof Please contact us for more information.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Cjdpfxsxvxqds Ab Tehf Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Cedpstvfcmefx Ab Tohf

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates Chjdpfjwxdqkex Ab Tof with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Chedpfjv Nztxox Ab Tjf Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Condition: like new (used), Year of construction: 2020, Ficep Raz 601 (also known as Nozomi) Automatic 9-axis CNC thermal coping robot Section size [min. mm]: 80x10 Section size [max. mm]: 610x450 Chedpfx Aboxq Rpne Tsf Plasma torch [qty]: 1 Infeed length: 16 m Outfeed length: 16 m

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Model – The Offshell Press MK V (Peeler). ✅ Serial numbers – TPR100/05/070 & TPR100/05/071. ✅ Date of manufacture - 2002. Chodoxuhw Dspfx Ab Tof ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: used, functionality: fully functional, For sale: used chamber filter press – VICENTINI Technical specifications: Includes diaphragm pump VICENTINI PM 800:  • output 800 l/h • max pressure 10 bar  • 1.1 kW motor • 1 piston • 64 strokes/min  • 1½″ inlet and outlet ports 22 cast iron round plates, Ø 660 mm Manual hydraulic closure (piston-driven) Approx. capacity: 350 kg per cycle Chsdjwrwt Espfx Ab Tjf Condition: working and ready to use

Year of construction: 2016, condition: used, functionality: fully functional, Item: AV-12315-16-Pressure tank 5000L Vertical stainless steel pressure tanks – 2 units Chodpfx Ajxpw E Tob Tef External dimensions: Diameter Ø 1850 mm, total height 4000 mm. Vertical, stainless steel pressure tanks - 2 pcs. Pressure: 2 bar. 60-degree conical bottom. Klopertop. Manhole at the lower part of the cylinder and on the top. CIP (Cleaning-In-Place). AISI 304.

Condition: used, WORK TO BE REPRODUCED ON THE SCOLPITRICE TYPE T4: Cjdextqpmjpfx Ab Tohf 2 left-hand pieces, 2 right-hand pieces, Spindle center distance: 220 mm, Maximum working length: 1250 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your desired concept. Thanks to our in-house production for almost all components, we are flexible and can respond specifically to your requirements. We not only provide you with your ideal powder coating system - we are also on hand with comprehensive user expertise to support you in all matters relating to surface technology. Every item offered here is manufactured especially for you. Whether large or small projects - we supply complete systems from a single source, tailored to your requirements. We look forward to hearing from you and implementing your ideas together! Example: KM Pro KM Pro electric chamber oven Heating type electric Air circulation Heating capacity 30kW Circulating air motor 3kW Insulated up to 250°C Connected load 380-400V, 34kW Floor insulation 100mm Insulation walls 150mm (highly compressed) External dimensions : 3400mm (L) x 1800mm (W) x 2550 (H) without fan motor on top and switch cabinet on the side Working dimension (inside) 3100mm (L) x 1200mm (W) x 1880m (H) Height due to the low-lying rails ≠ 2000mm Chedpfjtxcpwox Ab Tof Equipment - Double-wing door, incl. door bolt and handle - Adjustable air slats (optimum air circulation regulation) - 2 pcs. Heating coil - 2 PT 100 temperature sensors (top and bottom) - Exhaust air throttle flap, manual adjustment (exhaust air regulation) - 2 rails on the oven ceiling - Walls made of galvanized sheet steel Control system : - Rittal control cabinet - Hitachi panel 7 inch (touch operation) - Control via Hitachi PLC - Speed control of the air circulation motor via frequency converter, with braking resistor - Emergency off - Adjustable control power of the heating coil (if current peaks are reached, you can regulate the oven down) - GELLING function for stoving different colors in one oven (air circulation motor is throttled over a period of time) - OPEN-DOOR function regulates the air circulation downwards when the door is opened. So you have less heat loss - Traffic light to indicate the respective status. - STAY-HOME-WARM-UP is a time-controlled switch-on of the oven. This allows you to start the oven before starting work. - SEE-TEMP shows the temperature curve of the oven. This allows you to check the temperature. - GO-HOME-LEAN-BACK switches the oven off via a time control.

Condition: like new (used), Year of construction: 2017, Ficep Gemini G32 Automatic gantry CNC drilling, milling, and thermal cutting systems for large plates Plate size [max. mm]: 3100 x 8000 Plate thickness with plasma [max. mm]: 80 Plasma straight torches [max. no.]: 1 Plate thickness with oxy-fuel [max. mm]: 100 Oxy-fuel torches [max. no.]: 2 Drilling heads [no.]: 1 Drilling tools per head [no.]: 8 Drilling diameter [max. mm]: 40 Drilling thickness [max. mm]: 80 Spindle power [kW]: 15 Spindle speed [max. RPM]: 7000 Machine weight [kg]: 4500–4800 Cjdjxq Rndepfx Ab Tohf

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Chjdped I T Exefx Ab Tof

Year of construction: 2015, condition: used, Vertical stainless steel pressure tanks – 3 units. Chjdpfx Abjxpwywo Tof External dimensions: Dia Ø 1300 mm, total height 3000 mm. Pressure: 2 bar. 60-degree cone bottom. Klopertop. Manhole in the lower part of the cylinder. CIP. Material: AISI 304.

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal Codpfotxcyiox Ab Tjhf We can send you a video link to this system on request.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 Chedpfxov Iamze Ab Tof For further information, please contact us

Condition: new, Year of construction: 2025, Starter Kit KM Pro for Powder Coating Consisting of Electric Curing Oven KM Pro + ASAP XS Eco In stock and available immediately Electric Curing Oven KM Pro ✅Heating medium: Electric ✅Heating type: Circulating air ✅Heating capacity: 30 kW (continuously adjustable) Chsdpsxtf Azsfx Ab Tsf ✅Circulation air motor: 1.5 kW up to 250°C ✅Connected load: 380-400 V, 32 kW ✅Insulation: 150mm compressed ✅Working dimensions: 2200mm (L) x 1900mm (W) x 1700mm (H) ✅KM Pro control unit with crystal-clear touch display and intuitive operation ✅Remote maintenance KM Pro optional (additionally for only €2,200.00, controllable via smartphone or PC) ✅Loading via double-wing door ✅2x rack trolleys, half size for simultaneous curing ✅Automatic exhaust via actuator for smoke and temperature extraction ASAP XS Eco Powder Extraction ✅4,000 m³/h extraction capacity ✅2 polyester filter cartridges, each with 20 m² filter area ✅Working dimensions: 2300mm (H) x 1600mm (W) ✅Jet-pulse filter cleaning, manually switchable ✅Collection container with rollers ✅Powder baffle plate ✅Silencer for pleasant working noise levels ✅Mobile, can be rolled ✅Extraction fan 1.1 kW with IE3 motor ✅Sturdy construction made of galvanized sheet metal ✅Ready to connect via 16 A plug Now together for just €35,990.00 net, plus shipping For more information, feel free to contact us. LEASING / HIRE PURCHASE Together with our financing partner, we are happy to offer you leasing and hire purchase options (subject to good credit rating). Contact us for details. KM Industrieservice – The machine builder for your surface technology needs, specializing in powder coating. We manufacture: • Curing technology (electric, gas, oil, infrared, wood chips, hybrid) with certified curing results, available as KM Basic or KM Pro versions • Extraction and filter systems as standalone or cabin solutions in various designs • Pre-treatment systems for wet-chemical cleaning prior to coating, ensuring ideal adhesion conditions (manual, automatic, in all versions) • Blasting technology, manual or automatic, from small parts up to heavy-duty • Transport technology – for efficient parts transport (manual, automatic, lift-lower units, transverse shuttles, combination devices, and much more) • Remote maintenance – Fast and flexible service interventions Our Service Promise: ✅Highly individual consulting, manufacturing, and production tailored for even the most demanding requirements, all from a single source ✅Perfect fit and reliable delivery ✅In-house, German-speaking service technicians ✅Manufacturer expertise – As the OEM, we know your equipment inside out, and you can always count on immediate support. ✅Top-level and rapid spare parts availability ✅Long-term assistance for durable systems A video says more than a thousand words – Visit us on social media: ✅Instagram: km_industrieservice ✅Facebook: KM Industrieservice Would you like an in-depth consultation? We are happy to advise you personally: ✅02153-1377061. We look forward to your inquiry and to finding the right solutions for you!